L63 计算机外围设备 标准查询与下载

DLA SMD-5962-03237 REV A-2005 硅单片低损耗低压差线性可调正稳压器

This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.

MICROCIRCUIT, LINEAR, LOW DROPOUT, ADJUSTABLE POSITIVE REGULATORS, MONOLITHIC SILICON

ITU-T Z.371-2005 电信管理信息的图形信息 第4研究组

This Recommendation provides information about the way in which telecommunications resources are displayed at end-user workstations. In particular, it deals with graphical user interfaces and the information requirements for displaying telecommunications

Graphic information for telecommunication management objects Study Group 4

ITU-T Y.1711 CORR 1 SPANISH-2005 操作和维护MPLS网络的勘误表1研究组13机制;勘误1:02/2005

Operation and maintenance mechanism for MPLS networks Corrigendum 1

ISO/IEC TR 18046:2005 信息技术.自动识别和数据捕获技术.射频识别装置性能试验方法

Information technology - Automatic identification and data capture techniques - Radio frequency identification device performance test methods

ASTM F2366-05 用氙弧灯装置测定处于窗户透射光中的喷墨打印机的相对耐光性的标准实施规程

Lightfastness of printed ink jet media for specified periods of time is pertinent to the end use of these materials. Since the ability of ink jet prints to withstand color changes is a function of the spectral power distribution of the light source to which it is exposed, it is important that lightfastness be assessed under the conditions appropriate to the end use application. While ink jet prints may be handled and displayed under a variety of conditions, this practice is intended to produce the color changes that may occur in ink jet prints upon exposure to irradiation from daylight filtered through window glass by simulating these conditions. The accelerated procedure covered in this practice is intended to provide a means for the rapid evaluation of relative lightfastness under laboratory test conditions. The Practice does not provide a rating of the lightfastness of the prints, but determines the lightfastness ranking of a series of prints or the performance compared to controls with known lightfastness. Test results are useful for specification acceptance between producer and user, for quality control, and for research and product development. Color changes may not be a linear function of duration of exposure. The preferred method of determining effect of the light is to expose the prints for a number of intervals and to assess the exposure time required to obtain a specific color change or change in optical density. 1.1 This practice covers specific procedures and test conditions that are applicable for xenon-arc exposure of ink jet media prints conducted in accordance with Practices G 151 and G 155. The laboratory accelerated procedure is intended to determine the relative lightfastness of ink jet prints in office environments where window filtered daylight is used for illumination.1.2 The two criteria used to determine relative lightfastness are instrumental color change and change in optical density.1.3 This practice is useful in determining the relative lightfastness of a series of prints or the relation of the lightfastness of the print of interest to the performance of controls with known lightfastness exposed simultaneously. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in section .1.4 There is no equivalent ISO standard.

Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus

ASTM F1945-05 测定暴露于室内荧光照明下的喷墨打印品的耐光性的标准规程

1.1 This practice covers an accelerated procedure intended to determine the lightfastness of ink jet prints in office environments where overhead fluorescent light is used for illumination.1.2 This practice describes two methods based on Method II and Method III from D 4674, in which specimens are exposed to cool white VHO fluorescent lamps (Method II) and cool white fluorescent lamps (Method III) under controlled environmental conditions. 1.3 Two criteria are used to determine relative lightfastness: color change and optical density. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section .1.4 There is no known ISO equivalent standard.

Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting

DLA SMD-5962-96568 REV B-2005 抗辐射数字的互补金属氧化物半导体,倒相八角缓冲器或三状态输出线路驱动器,硅单片电路线型微电路

This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V).

MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, INVERTING OCTAL BUFFER/LINE DRIVER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON

KS C CISPR 24-2004 信息技术装备(ITE).电磁免疫性特征检测方法和测量限度

이 기준은 KS C CISPR 22에 정의한 것과 같은 정보 기기에 적용된다.

Information technology equipment-Immunity characteristics- Limits and methods of measurement

DLA SMD-5962-95798 REV B-2004 高速功率驱动器线型微电路

This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V).

MICROCIRCUIT, LINEAR, POWER DRIVER, HIGH SPEED, MONOLITHIC SILICON

ISO/IEC 19752:2004 信息技术.可能包括打印机组件的单色电子照相印刷机和多功能设备用着色盒打印量的测定方法

The scope of this International Standard is limited to evaluation of toner cartridge yield for toner containing cartridges (i.e. all-in-one toner cartridges and toner cartridges without a photoconductor) for monochrome electrophotographic printers. This International Standard could also be applied to the printer component of any multifunctional device that has a digital input-printing path (i.e. multi-function devices that contain printer components). This International Standard is only intended for the measurement of toner cartridge yield. No other claims can be made from this testing regarding quality, reliability, etc. NOTE Application of this International Standard for yield measurement of toner replenishment systems (i.e. toner cartridge- and bottle type systems where the toner reservoir is internal to the printing system and not user-replaceable) requires some procedural modifications specifically noted herein. This International Standard is intended for equipment used in the office space and does not apply to production volume or large format printing machines where the major cost of ownership is not caused by the consumable yield measured in this International Standard.

Information technology - Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that may contain printer components

JIS B 9527:2004 办公室设备.规格表中包含的最少信息.打印机

この規格は，使用者が自分の要求に合ったページプりンタを選択しやすくするために，異なった機種間のページプリンタの性能を比較できるように，ページプリンタの仕様書に記載すべき最小限の情報について規定する。

Office equipment -- Minimum information to be included in specification sheets -- Printers

DLA SMD-5962-88744 REV D-2004 硅单片双差分线路驱动器线性微电路

This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.

MICROCIRCUIT, LINEAR, DUAL DIFFERENTIAL LINE DRIVER, MONOLITHIC SILICON

SJ/T 11298-2003 数字投影机通用规范

General specification for digital projector

SJ/T 11298-2004 数字投影机通用规范

General specifications for digital projectors

DLA SMD-5962-88631 REV D-2004 硅单片周边驱动器线性微电路

This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.

MICROCIRCUIT, LINEAR, AND PERIPHERAL DRIVER, MONOLITHIC SILICON

ASTM F1946-04 测定曝露于室内荧光照明和室外透进日光下的喷墨打印制品耐晒性的标准操作规程

Lightfastness of printed ink jet media for specified periods of time is pertinent to the end use of these materials. Since the ability of an ink jet print to withstand color changes is a function of the spectral power distribution of the light source to which it is exposed, it is important that the effect of accelerated testing be assessed under the conditions appropriate to the end use application. While ink jet prints may be handled and displayed under a variety of conditions, this practice is intended to produce the color changes that may occur in ink jet prints upon exposure to irradiation from office lighting where overhead fluorescent light and window-filtered daylight is used for illumination by simulating these conditions. The accelerated procedure covered in this practice is intended to provide a means for the rapid evaluation of the effect of light under laboratory conditions. Test results are useful for specification acceptance between producer and user, for quality control, and for research and product development. Color changes may not be a linear function of duration of exposure. The preferred method of determining the effect of light is to expose the prints for a number of intervals and to assess the exposure time required to obtain a specific color change.1.1 This practice covers an accelerated procedure intended to determine the lightfastness of ink jet prints in office environments where overhead fluorescent light and window-filtered daylight is used for illumination. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8.

Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight

ASTM F1856-04 测定打印机墨盒的调色剂使用率的标准操作规程

1.1 This practice covers a procedure to determine the weight of toner used for printing a single page derived from an electrophotographic process. The practice uses a printer text target specifically developed for each printer for a page coverage of 5 0.5 % of the printable area. This practice requires specific tools and skills for disassembling and reassembling printer cartridges.1.2 The values stated in inch-pound units are to be regarded as the standards. The SI units given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining Toner Usage for Printer Cartridges

ASTM F1856-04(2009) 测定打印机墨盒碳粉使用量的标准实施规程

This practice can be used for the evaluation of new and remanufactured toner cartridges and their respective components used in an electrophotographic process. This test is suitable for research and development, and quality acceptance evaluations.1.1 This practice covers a procedure to determine the weight of toner used for printing a single page derived from an electrophotographic process. The practice uses a printer text target specifically developed for each printer for a page coverage of 5 ± 0.5 % of the printable area. This practice requires specific tools and skills for disassembling and reassembling printer cartridges. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining Toner Usage for Printer Cartridges

JEDEC JESD22-B101A-2004 外观检查

External visual inspection is an examination of the external surfaces, construction, marking, and workmanship of a finished package or component. External visual is a non-invasive and non-destructive test. It is functional for qualification, quality monitoring, and lot acceptance.

External Visual

JIS X 6149:2003 信息技术.信息交换用 8 mm 宽盒式磁带.螺旋扫描记录.大2型磁带格式

この規格は，8mm幅の磁気テープカートリッジの装置間での物埋的互換性をとるために物理的特性及び磁気的特性を規定する。

Information technology -- 8mm wide magnetic tape cartridge for information interchange -- Helical scan recording -- Mammoth Tape-2 format