L65 系统设备接口 标准查询与下载

KS X 3101-2007 信息技术.数据通信.25poleDTE/DCE接口连接和触点编号指定

? ??? ??? ?? ?? ??(DCE)? ??? ?? ??(DTE)?? ???? 2?

Information technology-Data communication-25-pole DTE/DCE interface connector and contact number assignments

ANSI/INCITS 397 V1 AMD 1-2007 信息技术.带有数据包接口扩展7的集成设备电路.修改件1(ATA/ATAPI-7/AM1)

The purpose of this draft is to amend INCITS 397:2005 and serve as a supplement to this standard.

Information technology - AT Attachment with Packet Interface-7 Amendment 1 (ATA/ATAPI-7/AM1)

ANSI/INCITS 397 V2 AMD 1-2007 信息技术.带有数据包接口扩展7的集成设备电路.修改件1(ATA/ATAPI-7/AM1)

The purpose of this draft is to amend INCITS 397:2005 and serve as a supplement to this standard.

Information Technology ?AT Attachment with Packet Interface Extensions 7 ?Amendment 1 (ATA/ATAPI-7/AM1)

ANSI/INCITS 397 V3 AMD 1-2007 信息技术.带有数据包接口扩展7的集成设备电路.修改件1(ATA/ATAPI-7/AM1)

The purpose of this draft is to amend INCITS 397:2005 and serve as a supplement to this standard.

Information Technology ?AT Attachment with Packet Interface Extensions 7 ?Amendment 1 (ATA/ATAPI-7/AM1)

ANSI/IEEE 1451.5:2007 传感器和传动装置用智能传感器接口的标准.无线通信协议和传感器电子数据表(TEDS)格式

This standard defines a wireless interface for sensors. It specifies radio-specific protocols for this wireless interface. It defines communication modules that connect the wireless transducer interface module (WTIM) and the network capable applications processor (NCAP) using the radio-specific protocols. It also defines the transducer electronic data sheets (TEDS) for the radio-specific protocols.

Standard for a Smart Transducer Interface for Sensors and Actuators - Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats

ANSI/INCITS 411-2007 信息技术.iSCSI管理API版本1.1.6

This API provides interfaces to discover and manage iSCSI resources on a system. The intended audience is vendors that deliver drivers that provide these resources to a system.

Information technology - iSCSI Management API Version 1.1.6

ANSI/INCITS 430-2007 信息技术.小型计算机系统接口(SCSI)多媒体命令-5(MMC-5)

This standard defines a set of SCSI command descriptor blocks that are useful in accessing and controlling devices with a peripheral device type set to 5. This command set is transport independent and may be implemented across a wide variety of environments for which a SCSI transport protocol has been defined. To date, these include Parallel SCSI, ATA/ATAPI, Serial ATA, Universal Serial Bus (USB versions 1.1 and 2.0), and High Performance Serial Bus (IEEE 1394, 1394A, and 1394B). The command set described has been selected for correct operation when the physical interface is ATA with the ATAPI command protocol.

Information Technology ?SCSI Multi-Media Commands - 5 (MMC-5)

ANSI/INCITS 431-2007 信息技术.SCSI/ATA译文(SAT)

The set of SCSI standards specifies the interfaces, functions, and operations necessary to ensure interoperability between conforming SCSI implementations. This standard is a functional description. Conforming implementations may employ any design technique that does not violate interoperability. This standard defines the protocol requirements of the SCSI / ATA Translation Layer (SATL) to allow conforming SCSI/ ATA translating elements to interoperate with ATA devices and SCSI application layers. The SATL covers the range of implementations that use ATA devices to emulate the behavior of SCSI devices as viewed by the SCSI application layer.

Information technology - SCSI/ATA Translation (SAT)

ANSI/IEEE 1451.0:2007 传感器和传动装置用智能传感器接口的标准.通用功能、通讯协议和传感器电子数据表(TEDS)格式

This standard provides a common basis for members of the IEEE 1451 family of standards to be interoperable. It defines the functions that are to be performed by a Transducer Interface Module (TIM) and the common characteristics for all devices that implement the TIM. It specifies the formats for Transducer Electronic Data Sheets (TEDS), and defines a set of commands to facilitate the set-up and control of the TIM as well as reading and writing the data used by the system. Applied Programming Interfaces (API) are defined to facilitate communication with the TIM and with applications.

Standard for a Smart Transducer Interface for Sensors and Actuators - Common Functions, Communication Protocols, and Transducer Electronic Data Sheet (TEDS) Formats

CEA-2017-2007 可携带媒体播放器的共同互联

This standard defines electrical and mechanical properties for a connector that will pass audio, video and associated metadata signals, control signals, and power between portable electronic devices and in-home and in-vehicle audio/video systems.

Common Interconnection for Portable Media Players

CEA-CEB5-B-2007 数字电视接收机监视器模式能力的推荐的做法

CEA-CEB5-B provides recommendations to digital television (DTV) designers and manufacturers concerning a “monitor” mode capability. CEA-762-A provides minimum specifications for a DTV remodulator.

Recommended Practice for DTV Receiver 揗onitor?Mode Capability

CEA-761-B-2007 数字电视二次调制器规格与增强的OSD能力

CEA-761-B defines minimum specifications for a one-way data path utilizing an 8 VSB trellis or a 16 VSB remodulator in compliance with ATSC A/53E Annex D. CEA-761-B references CEA-799-A for on-screen display (OSD) capabilities. The 8 VSB portion of CEA-761-B applies to devices capable of receiving 8 VSB signals and supporting “monitor mode.” The 16 VSB portion of CEA-761-B applies to devices capable of receiving 16 VSB signals and supporting “monitor mode.” For information concerning monitor mode recommendations, refer to CEA-CEB5-B.

DTV Remodulator Specification With Enhanced OSD Capability

ISO/IEC 14165-414:2007 信息技术.光纤信道.第414部分:一般业务.4(FC-GS-4)

FC-GS-4 describes in detail the basic Fibre Channel services introduced in FC-FS. The Fibre Channel services described in this document are • Directory Service, • Management Service and • Alias Service. In addition to the aforementioned Fibre Channel services, the Common Transport (CT) protocol is described. The Common Transport service provides a common FC-4 for use by the Fibre Channel services.

Information technology - Fibre Channel - Part 414: Generic Services - 4 (FC-GS-4)

CEA-885-2007 遥控起动器安全

This standard addresses the automotive accessories that allow the operator to start a vehicle while away from the vehicle, and the safety of such devices when installed.

Remote Starter Safety

IEEE 1451.0-2007 传感器和制动器用智能转换器接口标准.通用功能、通讯协议和转换器电子数据表(TEDS)格式

standards to be interoperable. It defines the functions that are to be performed by a Transducer Interface Module (TIM) and the common characteristics for all devices that implement the TIM. It specifies the formats for Transducer Electronic Data Sheets (TEDS), and defines a set of commands to facilitate the set-up and control of the TIM as well as reading and writing the data used by the system. Applied Programming Interfaces (API) are defined to facilitate communication with the TIM and with applications.

Standard for a smart transducer interface for sensors and actuators - Common functions, communication protocols, and Transducer Electronic Data Sheet (TEDS) formats

GJB 5925-2007 部队侦察情报装备接口要求

本标准规定了部队侦察情报装备设备间接口的一般要求及有线连接件接口和数据传输软件接口设计的通用要求。 本标准适用于部队侦察情报装备设备间接口的设计、生产和使用。

Interface requirement for battle field reconnaissance and intelligence equipment

JEDEC JESD207-2007 无线前段 基带数字并联接口(RBDP)

This interface definition is intended for applications where the RFIC and BBIC are mounted on the same PCB, connected by relatively short PCB traces. A typical example would be a wireless networking NIC realised on a PCMCIA ExpressCard or Mini-PCI card format.

Radio Front End - Baseband Digital Parallel (RBDP) Interface

CEA-2031 ERTA-2007 高保真扬声器系统的测试和测量方法

The frequency response of a subwoofer, as determined in 9.Maximum rms amplifier power that the loudspeaker is capable of handling when tested in a manufacturer-specified enclosure, as determined in 4.

Testing and Measurement Methods for Mobile Loudspeaker Systems

ANSI/INCITS 413-2007 信息技术.快速输入输出TM互连规范

The RapidIOTarchitecture was developed to address the need for a high-performance low pin count packet-switched system level interconnect to be used in a variety of applications as an open standard. The architecture is targeted toward networking, telecom, and high performance embedded applications. It is intended primarily as an intra-system interconnect, allowing chip-to-chip and boardto- board communications at Gigabyte per second performance levels.

for Information Technology ?RapidIOTM Interconnect Specification

ISO/IEC 14776-322:2007 信息技术.小型计算机系统接口(SCSI).第322部分:小型计算机系统接口(SCSI)块指令-2(SBC-2)

This part of ISO/IEC 14776 defines the command set extensions to facilitate operation of SCSI direct-access block devices. The clauses of this standard, implemented in conjunction with the applicable clauses of SPC-3, fully specify the standard command set for SCSI direct-access block devices. The objective of this standard is to a) permit an application client to communicate over a SCSI service delivery subsystem with a logical unit that declares itself to be a direct-access block device in the PERIPHERAL DEVICE TYPE field of the standard INQUIRY data (see SPC-3) and b) define commands unique to the direct-access block device type. The set of SCSI standards specifies the interfaces, functions and operations necessary to ensure interoperability between conforming SCSI implementations. This standard is a functional description. Conforming implementations may employ any design technique that does not violate interoperability.

Information technology - Small Computer System Interface (SCSI) - Part 322: SCSI Block Commands-2 (SBC-2)