L65 系统设备接口 标准查询与下载

DIN EN 61800-7-301:2008 可调速电驱动设备.电驱动设备轮廓的通用接口和使用.1型轮廓映射到网络技术

IEC61800-7 specifies profiles for Power Drive Systems (PDS) and their mapping to existing communication systems by use of a generic interface model. The functions specified in this part of IEC 61800-7 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws. This part of IEC 61800-7 specifies the mapping of the profile type 1 (CiA402) specified in IEC 61800-7-201 onto different network technologies. - CANopen, see Clause 5; - EtherCAT, see Clause 6; - ETHERNET Powerlink, see Clause 7.

Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies (IEC 61800-7-301:2007); English version EN 61800-7-301:2008

DIN EN 61800-7-201:2008 可调速电驱动设备.第7-201部分:电驱动设备轮廓的通用接口和使用.1型轮廓规范

IEC 61800-7 specifies profiles for Power Drive Systems (PDS) and their mapping to existing communication systems by use of a generic interface model. The functions specified in this part of IEC 61800-7 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws. This part of IEC 61800-7 specifies profile type 1 for Power Drive Systems (PDS). Profile type 1 can be mapped onto different communication network technologies.

Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification (IEC 61800-7-201:2007); English version EN 61800-7-201:2008

DIN EN 61800-7-203:2008 可调速电驱动设备.第7-203部分:电驱动设备轮廓的通用接口和使用.3型轮廓规范

IEC61800-7 specifies profiles for Power Drive Systems (PDS) and their mapping to existing communication systems by use of a generic interface model. The functions specified in this part of IEC 61800-7 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws. This part of IEC 61800-7 specifies profile type 3 for Power Drive Systems (PDS). Profile type 3 can be mapped onto different communication network technologies.

Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification (IEC 61800-7-203:2007); English version EN 61800-7-203:2008

GJB 6579-2008 特种部队单兵侦察系统接口要求

本标准规定了特种部队单兵侦察系统设备之间接口的通用要求。 本标准适用于特种部队单兵侦察系统的研制、生产和使用。亦适用于部队侦察单兵装备的研制、生产和使用。

Interface requirement for special force individual reconnaissance system

CEA-775-C-2008 DTV 1394接口规范

CEA-775-C defines mechanisms to allow a source of MPEG service, such as a cable or terrestrial set-top box, digital VCR, or DTV to utilize the MPEG decoding and display capabilities in a DTV. A method is included to allow the OSD Producer to supply bitmap graphic overlays for blending and composition in the DTV over decoded video. CEA-775-C supports an optional baseband analog audio/video connection between an audio/video source device and the DTV. Mechanisms are provided to allow the source device to control the selection of the audio/video source for display in the DTV between an MPEG service decoded in the DTV and incoming analog audio/video supplied to it via an external input. Nothing in CEA-775-C is intended to constrain the use of other 1394-based protocols. 1.1 Background The currently implemented analog audio/video home entertainment cluster consists of various signal sources and various display devices. Possible audio/video sources in this system include a video cassette recorder, a DVD player, and a DBS or cable set top box. In the analog system the audio/video source can overlay its graphical user interface on its output video as shown in Figure 1. This allows the user to control the source based on information shown on the TV display. A Digital Television (DTV) system using a similar model is not currently practical. Figure 2 shows an example of what would be required. The process of decoding the original bitstream to include the GUI overlay and then re-encoding for transmission to the DTV adds significant complexity and usually degrades picture quality. CEA-775-C defines a specification for a compressed audio/video digital interface to a DTV that provides a level of functionality that is similar to an analog audio/video system or an uncompressed digital audio/video system (e.g. HDMI). A representation of a typical system is shown in Figure 3. This diagram shows an A/V Source that is capable of producing analog audio and video and also compressed audio and video delivered as an MPEG Transport Stream. The analog signal is transmitted over a standard coaxial cable and the MPEG Transport Stream is passed over an IEEE 1394 bus. Bitmaps of the source OSD are sent separately over the same IEEE 1394 bus and are mixed with the decoded MPEG video in the DTV prior to being presented on the display. This process removes the need for the A/V Source to perform the additional MPEG video decodes and re-encodes. The IEEE 1394 bus is also used by the source and display to exchange control and status messages. The digital interface is based on the IEEE 1394 Standard for a High Performance Serial Bus [16], the IEC 61883-1 digital interface standard [10], and on the AV/C Digital Interface Command Set General Specification [6]. The IEEE 1394 Standard originated in Apple Computer as a multi-media interconnect. The standard provides: a) Data transmission at various data rates. CEA-775-C requires support for the s200 or higher level of service defined in IEEE 1394-1995 (s200 has a bit rate of 196.608 megabits per second). b) Inexpensive and physically small interconnection c) Hot pluggable connection d) Daisy chained or branched interconnection e) Guaranteed bandwidth for isochronous data CEA-775-C is designed to enable interoperability between a DTV compliant with CEA-775-C and various types of Consumer digital audio/video sources including digital set-top boxes (STBs) and analog/digital hard disk or videocassette recorders (VCRs). CEA-775-C defines a level of functionality that allows compliant systems to: a) Discover and adapt to OSD functionality supported in the display device b) Pass an MPEG-2 Transport Stream from the bitstream source to the display device c) Transmit OSD information from the OSD Producer to the display device or OSD Consumer d) Control the selection of different sources to the display device

DTV 1394 Interface Specification

ISO/IEC 11002:2008 信息技术.多路径管理(API)

This International Standard provides management interfaces to standard capabilities defined in ISO/IEC 14776-453 (SPC-3) and common vendor-specific extensions to the standard capabilities. The intended audience is vendors that deliver drivers that provide these capabilities. This standard relates to SCSI multipathing features and excludes multipathing between interconnect devices (such as Fibre Channel switches) and transport specific multipathing (such as iSCSI multiple connections per session).

Information technology - Multipath management (API)

ISO/IEC 14776-223:2008 信息技术.小型计算机系统接口(SCSI).第223部分:光纤信道协议第3版(FCP-3)

This standard defines a third version of the SCSI Fibre Channel Protocol (FCP). This standard is a mapping protocol for applying the SCSI command set to Fibre Channel. This standard defines how the Fibre Channel services and the defined Information Units (IUs) are used to perform the services defined by the SCSI Architecture Model - 3 (SAM-3). This third version includes additions and clarifications to the second version, removes information that is now contained in other standards, and describes additional error recovery capabilities for the Fibre Channel Protocol.

Information technology - Small Computer System Interface (SCSI) - Part 223: Fibre channel protocol, third Version (FCP-3)

JEDEC JESD204A-2008 数据转换器用系列接口

This specification describes a serialized interface between data converters and logic devices. It contains normative information to enable designers to implement devices that communicate with other devices covered by this specification. Informative annexes are included to clarify and exemplify the specification. Due to the range of applications involved, the intention of the document is to completely specify only the serial data interface and the link protocol. Certain signals common to both the interface and the function of the device, such as source clocks and control interfaces, have application-dependent requirements. Devices may also have application-dependent modes, such as a low power / shutdown mode, that will affect the interface. In these instances, the specification merely constrains other device properties as they relate to the interface, and leaves the specific implementation up to the designer. This version of the standard supports serial data interfaces consisting of single or multiple lanes per converter device. In addition, converter functionality (ADC or DAC) can be distributed over multiple devices: ? All parallel running devices are implemented or specified to run synchronously with each other using the same data format. ? Normally this means that they are part of the same product family.

Serial Interface for Data Converters

ANSI/INCITS/ISO/IEC 11002:2008 信息技术.多通道管理API

Information technology - Multipath management API

ANSI/INCITS 448-2008 信息技术.SCSI外部设备.2(SES-2)

Information Technology - SCSI Enclosure Services - 2 (SES - 2)

ANSI/HFES 200-2008 软件用户接口的人类因素工程

The scope of HFES200 is primarily focused on user interaction with software for personal and business use, most commonly implemented on a desktop PC or laptop. Most of the recommendations in this standard also apply to home and mobile computing and to interactive voice response applications. Many of the recommendations may also apply to other interactive software. This standard does not address system or software design processes.

Human Factors Engineering of Software User Interfaces

ANSI/IEEE 1394:2008 高性能串行总线标准

This standard describes a high-speed, low-cost Serial Bus suitable for use as a peripheral bus, a backup to parallel backplane buses, or a local area network.

Standard for a High Performance Serial Bus

IEEE 1394-2008 高性能串行总线

High-performance serial bus

ANSI/VITA 42.0-2008 XMC

This proposed standard defines an open standard for supporting high-speed, switched interconnect protocols on an existing, widely deployed mezzanine module form factor

XMC

KS X 3103-2007 信息技术.数据通信.15极点DTE/DCE接口连接和触点编号分配

? ??? ??? ???? ??? ?? ?? ??(DCE)? ??? ?? ??(DTE) ?

Information technology-Data communication-15 pole DTE/DCE interface connector and contact number assignments

KS X 3101-2007 信息技术.数据通信.25poleDTE/DCE接口连接和触点编号指定

? ??? ??? ?? ?? ??(DCE)? ??? ?? ??(DTE)?? ???? 2?

Information technology-Data communication-25-pole DTE/DCE interface connector and contact number assignments

KS X ISO/IEC 9318-3:2007 信息技术.智能外围接口.第3部分:磁盘和光盘驱动用设备通用命令集

ISO/IEC 9318? ??? ? ??? ?? ???? ? ??? ????? ?? ??

Information technology-Intelligent Peripheral Interface-Part 3:Device generic command set for magnetic and optical disk drives

KS X ISO/IEC 9318-4:2007 信息技术.智能外围接口.第4部分:磁带驱动用设备通用命令集(IPI.3磁带)

? ??? ??? ????? ?? ?? ?? 3(?? ??) ?????? ????. ???

Information technology-Intelligent Peripheral Interface-Part 4:Device generic command set for magnetic tape drives

KS X 3117-2007 ISDN基本访问接口的参考点S和T中接口连接器和联系分配

? ??? ??? ?? ??? ?(?? ISDN?? ??.) ?? ??? ??? ??? ?

Information technology-Telecommunications and information exchange between systems-Interface connector and contact assignments for ISDN basic access interface located at reference points S and T

KS X 3118-2007 信息技术.通信和系统间信息互换.50极(pole)接口接头的对应尺数和编号指定

? ??? ??? ?? ??(DTE)? ??? ?? ?? ??(DCE) ??? ??? ??

Information technology-Telecommunications and information exchange between systems-50-pole interface connector mateability dimensions and contact number assignments