L65 系统设备接口 标准查询与下载

CEA-2031-2006 高保真扬声器系统的测试和测量方法

CEA-2031 defines test procedures for rating the performance and physical size of mobile loudspeakers,and requirements for reporting these characteristics. CEA-2031, when used in conjunction with CEA-2006-A, Testing & Measurement Methods for Mobile Audio Amplifiers, enables consumers to select mobile loudspeakers with power handling capabilities that are appropriate for the power output characteristics of their mobile amplifiers.

Testing and Measurement Methods for Mobile Loudspeaker Systems

CEA-2027-A-2006 家庭网络采用基于网络的协议(包含颜色)用户接口规范

This CEA standard includes mechanisms to allow audio/video (A/V) devices connected via a home network to present a status and control user interface (UI) on a network-attached renderer.

A User Interface Specification for Home Networks Using Web-based Protocols (Contains Color)

CEA-766-B-2006 美国和加拿大的等级划分区域表(RRT),符合运输的内容咨询描述,采用ATSC标准程序和系统信息协议(PSIP)的内容咨询信息

CEA-766-B augments ATSC A/65C and designates the RRT which provides the receiver with the definition of the rating system and the Content Advisory Descriptors which provide the receiver with the specific program rating for each program. Specifically, CEA-766-B specifies the exact syntax to be used to define the U.S. and Canadian Rating Region Tables (RRT) in accordance with ATSC A/65C Section 6.4, as well as the exact syntax to be used in the Content Advisory Descriptors that convey the rating information for each program in accordance with ATSC A/65C Section 6.9.3. Thus DTV receivers may block unwanted programs as determined by the user.

U.S. and Canadian Rating Region Tables (RRT) and Content Advisory Descriptors for Transport of Content Advisory Information Using ATSC Program and System Information Protocol (PSIP)

CEA-2012-A-2006 零部件产品的MOST网络网关(彩色)

The MOST Specifications provide a comprehensive structure on which to build automotive networks. The MOST Specifications were designed for the automotive industry by carmakers and suppliers and thus take into account the special environmental and performance requirements needed in automobiles. The MOST Specifications are very broad. They are organized as shown in Figure 1.

MOST Network Gateway for Aftermarket Products (Contains Color)

CEA-799-A-2006 屏幕视控系统规范

This standard, CEA-799-A, specifies syntax and semantics for bitmapped graphics data typically used for on-screen display (OSD). CEA-799-A is applicable whenever it is necessary to specify a standard method for delivery of bitmapped graphics data. The pixel formats include optional alpha-blend and transparency attributes to support composition of graphics over analog or digitally decoded video within the display.

On-Screen Display Specifications

CEA-851-A-2006 家庭通用网络

This standard was developed under the auspices of the R7 Home Network Committee.

Versatile Home Network

ANSI/INCITS 416-2006 SCSI用光纤信道协议的信息技术.第3版(FCP-3)

This standard defines a third version of the SCSI Fibre Channel Protocol (FCP). This standard is a mapping protocol for applying the SCSI command set to Fibre Channel. This standard defines how the Fibre Channel services and the defined Information Units (IUs) are used to perform the services defined by the SCSI Architecture Model - 3 (SAM-3). This third version includes additions and clarifications to the second version, removes information that is now contained in other standards, and describes additional error recovery capabilities for the Fibre Channel Protocol.

For Information Technology ?Fibre Channel Protocol for SCSI, Third Version (FCP-3)

JEDEC JESD204-2006 数据转换器的串行接口

This specification describes a serialized interface between data converters and logic devices. It contains normative information to enable designers to implement devices that communicate with other devices covered by this specification. Informative sections are included to clarify and exemplify the specification.

Serial Interface for Data Converters

ISO/IEC 14776-362:2006 信息技术.小型计算机系统接口(SCSI).第362部分:SCSI多媒体命令-2(MMC-2)

This part of ISO/IEC 14776 defines the SCSI command set extensions to access multimedia features for all classes of SCSI devices. The commands specified within this standard define standard access and control of those features of the device that are used in multimedia applications. The SPC command set and its extensions are transport independent and may be implemented across a wide variety of environments for which a SCSI command mapping and delivery vehicle has been defined. To date, these include Fibre Channel, SCSI Parallel Interface, High Performance Serial Bus, Serial Storage Architecture and ATA/ATAPI. This command set gives and/or enables the following. a) A definition of the command formats and functions independently of delivery, protocol/signalling or transport mechanism. Architectural constraints regarding command functions, over the various transports are addressed in the document specific to the physical transport. b) Standardized access to common Features of SCSI devices employed in multimedia applications. c) System software/firmware independence across device classes. Thus, different tape drives, optical media drives and other devices can be added to the system without requiring modifications to generic system hardware and software. Provision is made for the addition of special Features and functions through the use of vendor-specific options. Reserved Opcodes are provided for future standardization. d) Provides compatibility such a way that properly conforming ISO/IEC 9316 devices may inter-operate with subsequent devices provided that the system engineering is correctly done. SCSI protocol extensions are designed to be permissive of rejections by conforming ISO/IEC 9316 devices and thus allow the ISO/IEC 9316 device to continue operation without requiring the use of the extension.

Information technology - Small Computer System Interface (SCSI) - Part 362: SCSI Multimedia Commands - 2 (MMC-2)

JEDEC JESD96A-2006 无线前段.基带接口

This interface is a high-speed, low latency digital interface that has been defined primarily for wireless local area networking applications but can be used for other RF to BB links such as used in metro area networking and wide area networking applications. This interface allows the radio front end of a wireless network controller to be separated from the base-band and MAC device(s) by up to 50 cm. A typical example is to connect a radio front end in the upper (screen) portion of a laptop computer to a base-band device on the motherboard. Lower power options are also defined for shorter distances. The basic interface consists of three diff

Radio Front End-Baseband (RF-BB) Interface

ANSI/INCITS 417-2006 串行附加SCSI- 1.1 (SAS-1.1)用信息技术

The SCSI family of standards provides for many different transport protocols that define the rules for exchanging information between different SCSI devices. This standard defines the rules for exchanging information between SCSI devices using a serial interconnect. Other SCSI transport protocol standards define the rules for exchanging information between SCSI devices using other interconnects. This standard also defines the rules for exchanging information between ATA hosts and ATA devices using the same serial interconnect. Other ATA transport protocol standards define the rules for exchanging information between ATA hosts and ATA devices using other interconnects.

for Information Technology ?Serial Attached SCSI - 1.1 (SAS-1.1)

CEA-CEB17-2006 地板到天花板指导,为实现最佳效果(含彩色)的住宅音箱系统规划,选型和安装

This recommended practice was developed by the Consumer Electronics Association’s Audio Systems Committee.

A Floor-to-Ceiling Guide for Residential Speaker Systems Planning, Selection and Instalation for Optimum Performance (Contains Color)

ANSI/IEEE 1285:2005 可分度的存储接口标准

Specifies a scalable interface between mass-storage devices and controlling hardware/software. The interface has been optimized for low-latency interconnects, assuming that the processor/controller and the storage device can often be co-located on the same printed-circuit board.

Standard for Scalable Storage Interface

ARINC 620-5-2005 数据传输器系统和接口规范包括附录1到5

DATA LINK GROUND SYSTEM STANDARD AND INTERFACE SPECIFICATION (DGSS/IS) Includes Supplements 1-5

DATA LINK GROUND SYSTEM STANDARD AND INTERFACE SPECIFICATION (DGSS/IS) Includes Supplements 1-5

ISO/IEC 14776-452:2005 信息技术.小型计算机系统接口(SCSI).第452部分:SCSI主命令-2(SPC-2)

This part of ISO/IEC 14776 defines the SCSI commands that are mandatory and optional for all SCSI devices. It also defines the SCSI commands that may apply to any device model. Since a host processor is a part of any SCSI domain, the processor device model is defined in this standard. The commands that may be implemented by a SCSI processor device are also defined in this standard. Some target SCSI devices may implement an initiator subset of the processor device model to support the Asynchronous Event Reporting capability defined in the SCSI-3 Architecture Model.

Information technology - Small Computer System Interface (SCSI) - Part 452: SCSI Primary Commands-2 (SPC-2)

ANSI/INCITS 406-2005 自动/驱动器接口.传输协议(ADT)

Defines the protocol requirements of the Automation/Drive Interface - Transport Protocol to allow conforming ADI SCSI devices to inter-operate.

Automation/Drive Interface Transport Protocol (ADT)

ANSI/INCITS 405-2005 小型计算机系统接口(SCSI)块命令-2(SBC-2)

Defines the command set extensions to facilitate operation of SCSI direct-access block devices. The clauses of this standard, implemented in conjunction with the applicable clauses of SPC-3, fully specify the standard command set for SCSI direct-access block devices.

SCSI Block Commands - 2 (SBC-2)

CEA-2009-A-2005 公共警报接收器的性能规范

This voluntary standard defines minimum performance criteria for consumer electronic products designed to receive SAME alert signals broadcast by the National Oceanic and Atmospheric Administration’s Weather Radio network and Environment Canada’s Meteorological Services of Canada Radio network.

Performance Specification for Public Alert Receivers

ISO/IEC 14776-222:2005 信息技术.小型计算机系统接口(SCSI).第222部分:SCSI的纤维信道协议.第二版(FCP-2)

This part of ISO/IEC 14776 defines a second version of the SCSI Fibre Channel Protocol (FCP). This part of ISO/IEC 14776 is a mapping protocol for applying the SCSI command set to Fibre Channel. It defines how the Fibre Channel services and the defined Information Units (IUs) are used to perform the services defined by the SCSI-3 Architecture Model – 2 (SAM-2). This second version includes additions and clarifications to the first version, removes information that is now contained in other standards, and describes additional error recovery capabilities for the Fibre Channel protocol.

Information technology - Small Computer System Interface (SCSI) - Part 222: Fibre Channel Protocol for SCSI, Second Version (FCP-2)

ANSI/INCITS 397 V2-2005 带有数据包接口的集成电路设备.7卷2.平行传输协议和物理互连(ATA/ATAPI-7 V2)

This volume (ATA/ATAPI-7 V2) contains the requirements for the implementation of the ATA parallel transport. The parallel ATA transport described in this volume is highly compatible with the prior standard (ATA/ATAPI-6, INCITS 361-2002). The physical interconnect information is now brought into one separate volume for ease of reference when implementing the parallel transport. Implementation of the parallel transport must comply with Volume 1, but does not require any references to Volume 3.

for Information Technology AT Attachment with Packet Interface - 7 Volume 2 - Parallel Transport Protocols and Physical Interconnect (ATA/ATAPI-7 V2)