M05 通用零部件、线路器材 标准查询与下载

DIN 41700-2:1989 电信技术.三极插头

This standard is applicable to three pole plug for use in telecommunication equipment.

Electrical communication engineering; three pole plug

DIN 41701:1989 电信工程.四极插头

This standard is applicable to four pole plugs for use in telecommunication equipment.

Electrical communication engineering; four pole plug

DIN VDE 0800-9:1989 远程通信.第9部分:与安全相关的元器件和绝缘材料 KU 值

Telecommunications; KU-values of safety relevant components and insulations

DIN 41704-1:1987 电信工程.双排触点连接器.4和8极接线盒和连接器.类型、尺寸

This standard applies to 4- and 8pole connectors for connection of transportable telecommunication equipment. The connectors have 4 or 8 contacts. The 4pole connector is latching, the 8pole connector latching or locking. The connection is coded.#,,#

Electrical communications engineering; connectors with two rows of contacts, connection box and connector, 4- and 8poles; types, dimensions

DIN 41704-2:1987 电信工程.双排触点连接器.4和8极接线盒和连接器.要求、检验

Electrical communications engineering; connectors with two rows of contacts, connection box and connector, 4- and 8poles; requirements, tests

DLA MS35760 REV A VALID NOTICE 1-1987 (CD-307-A型软线)软线组装

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

CORD ASSEMBLY, ELECTRICAL (CORD CD-307-A)

DIN 45325-1:1987 无线电接收天线同轴插接件.不匹配同轴插件.

This standard contains specifications for coaxial unmatched radiofrequency connectors such as dimensions, climatic group and type test.#,,#

Coaxial connectors for receiving aerials; coaxial unmatched connector; identical with IEC 60169-2, edition 1965 (status as of 1982)

DIN 41015:1986 电信技术.插口和插口簧片.要求.检验

This test is appropriate to jacks and jack strips used in telecommunication field and gives chemical, mechanical and electrical requirements and tests.#,,#

Electrical communication engineering; jacks and jack strips; requirements, tests

DIN 49581:1985 电信技术.带三通插孔的１０点和２０点插口簧片

Electrical communication engineering; jack strip 10 point and 20 point with three-way jack

DIN 49580:1985 电信工程.４插孔的１０位置插孔簧片

Electrical communication engineering; jack strip 10 point with four-way jack

DIN 49582:1985 电信技术.１０个带６通道插口的插口簧片

Electrical communication engineering; jack strip 10 point with six-way jack

DIN 41714-1:1985 电信技术.圆形接触点排列为２－、４－和６－列的连接器.类型、尺寸

Electrical telecommunications; connectors with circular contact arrangement 2-, 4- and 6-way; types, dimensions

BS 5938-1:1984 电信用电感器和变压器的磁芯 测量方法

Gives guidance on drafting those parts of specifications for magnetic cores concerned with measuring methods for magnetic and electrical properties of cores made primarily of magnetic oxides or metallic powders, and used in inductors and transformers for telecommunication and similar equipment.

Cores for inductors and transformers for telecommunications. Methods of measurement

DIN 41698:1984 电信技术.插头.要求、试验

Electrical communication engineering; plug; requirements, tests

DIN 45323:1982 便携式娱乐设备外部低压电源偶合连接器

Connectors for coupling an external Iow-voltage power to portable entertainment equipmentDiese Steckverbinder dürfen nur für Spannungen bis max. 34 V (Spitzenwert) und Stromst?rken bis max. 3A verwendet werden.Zusammenhang mit der von der International

Connectors for coupling an external low-voltage power to portable entertainment equipment

BS 6312:1982 用于英国通信网络线路插座的插头规范

Dimensions, mechanical and electrical performance and methods of test.

Specification for plugs for use with British Telecommunications line jack units

DLA MS25044 REV B-1981 双头螺栓接线端子板

FOR DESIGN FEATURE PURPOSES, THIS STANDARD TAKES PRECEDENCE OVER ACQUISITION DOCWENTS REFERENCED HEREIN. TEFERENCED WCUMENTSHALL BE OF ?HE ISSUE IN EFFECT ON DATE OF INVITATIONS FOR BID.

TERMINAL BOARD TWO STUD

BS 5938-2:1980 电信用电感器和变压器的磁芯 性能规范起草指南

Guidance on drafting specifications and article sheets for magnetic cores made of magnetic oxides or metallic powders used in inductors and transformers for telecommunications and similar equipment.

Cores for inductors and transformers for telecommunications. Guide to the drafting of performance specifications

DIN 41618-4:1976 2.5 x 1 mm 刀形触点式多极连接器.第4部分:按 DIN 41618 和 DIN 41622 的连接器用外壳和锁紧装置

Multipole connectors with blade contacts 2,5 mm × 1 mm; housings and locking devices for connectors DIN 41 618 and DIN 41 622Die Teile brauchen der bildlichen Darstellung nicht zu entsprechen; nur die angegebenen Ma?e sind einzuhalten.

Multipole connectors with blade contacts 2,5 mm 1 mm; housings and locking devices for connectors DIN 41618 and DIN 41622

DIN 41618-3:1974 2.5 x 1 mm 刀形触点式多极连接器.第3部分:定位零件和制动零件

Multipole connectors, locating and detent parts

Multipole connectors with blade contacts 2,5 mm 1 mm; locating and detent parts