共找到 442 条与 通信网传输系统接口 相关的标准,共 30 页
This document contains all requirements of the air interface for I-CDMA compatible ATs and BSRs, either directly or by reference to another published document. The I-CDMA air interface is composed of three specific layers analogous to the OSI Network Lay
I-CDMA Spread Spectrum Systems Air Interface Standard - Stage 3 Text
This European standard specifies requirements in the telecommunications sector.
Telecommunications Management Network (TMN) - Management interfaces associated with the VB5.2 reference point (Endorsement of the English version EN 301754 V 1.1.1 (2001-09) as German Standard)
Network and Customer Installation Interfaces - DS3 Metallic Interface Specification
This standard provides the physical layer (Layer 1) specifications for DS3 User-Network Interfaces (UNIs) that are used to transport asynchronous transfer mode (ATM) cells in the DS3 payload. The term User-Network Interface (UNI) is used in this standard
Network and Customer Installation Interfaces - DS3 Physical Layer Interface and Mapping Specifications for ATM Applications
Supplement to ATIS-0600403.1999(R2007) - Network and Customer Installation Interfaces - DS1 Electrical Interface
Network and Customer Installation Interfaces - DS3 Physical Layer Interface and Mapping Specifications for ATM Applications
Network and Customer Installation Interfaces - DS1 Physical Layer Interface and Mapping Specifications for ATM Applications
There are many API/Object Interface-related activities outside of ITU-T SG11. Many API/Object Interface specifications have already been released from such activities and a lot of discussions for new APIs/Object Interfaces are starting within them. However,there is no good reference material to help introduce the API/Object Interface specifications under current discussion and it is difficult to know what kind of APIs are released or discussed. This Supplement provides high-level descriptions of API/Object Interface-related activities outside of ITU-T,covering the interface between network control and application layers.This Supplement should be used as a reference to the other API/Object Interface activities outside of ITU-T.This Supplement will also help to avoid the overlapping of the standardization effort.
Technical Report: Reference document on API/object interface between network control and application layer
There are many API/Object Interface-related activities outside of ITU-T SG11. Many API/Object Interface specifications have already been released from such activities and a lot of discussions for new APIs/Object Interfaces are starting within them. However,there is no good reference material to help introduce the API/Object Interface specifications under current discussion and it is difficult to know what kind of APIs are released or discussed. This Supplement provides high-level descriptions of API/Object Interface-related activities outside of ITU-T,covering the interface between network control and application layers.This Supplement should be used as a reference to the other API/Object Interface activities outside of ITU-T.This Supplement will also help to avoid the overlapping of the standardization effort.
Technical Report: Reference document on API/object interface between network control and application layer
Standard for information technology - Portable Operating System Interface (POSIXę); Technical Corrigendum 1
Standard describes network and customer installation DS3 metallic interfaces. Requirements on DS3 electrical parameters, basic framing format, M23 multiplex and C-Bit Parity applications, and physical signal characteristics are included or referenced.
Network and Customer Installation Interfaces - DS3 Metallic Interface Specification
This supplement replaces Annex E of T1.403-1999 in its entirety. The replacement clarifies, but does not change, the requirements of Annex E.
Telecommunications - Network and Customer Installation Interfaces - DS1 Electrical Interface
This standard describes an interface bwetween a telecommunication carrier network and a customer installation in terms of their interaction and electrical characteristics. In this standard, the telecommunication carrier netowrk is referred to as the Netw
Telecommunications - Network to Customer Installation Interfaces - Analog Voicegrade Special Access Lines Using Customer-Installation-Provided Loop-Start Supervision
This standard provides network-to-customer installation (CI) interface requirements for Direct Inward Dialing (DID) analog voicegrade switched access using loop reverse-battery signaling. DID is a feature of PBX and Centrex systems that permits direct ac
Telecommunications –Installation Interfaces – Direct-Inward-Dialing Analog Voicegrade Switched Access Using Loop Reverse-Battery Signaling
This standard provides specifications for E&M signaling interfaces between telecommunications carrier networks and customer installations. In this standard, the telecommunications carrier network is referred to as the Network and the customer premises wi
Telecommunications – Network to Customer Installation Interfaces – Analog Voicegrade Special Access Lines Using E&M Signaling
The document specifies requirements in the telecommunication sector.
V interfaces at the digital Local Exchange (LE) - V5.2 interface for the support of Access Network (AN) - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network la
The document specifies requirements in the telecommunications sector.
V interfaces at the digital Local Exchange (LE) - V5.2 interface for the support of Access Network (AN) - Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network layer (LE side) (Endorsement of the English version EN 300347-5
The document specifies requirements in the telecommunications sector.
V interfaces at the digital Local Exchange (LE) - V5.1 interface for the support of Access Network (AN) - Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the network layer (AN side) (Endorsement of the English version EN 300324-3
The document specifies requirements in the telecommunication sector.
V interfaces at the digital Local Exchange (LE) - V5.1 interface for the support of Access Network (AN) - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network la
The document specifies requirements in the telecommunications sector.
V interfaces at the digital Local Exchange (LE) - V5.1 interface for the support of Access Network (AN) - Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network layer (LE side) (Endorsement of the English version EN 300324-5
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号