M14 通信网传输系统接口 标准查询与下载

ANSI/IEEE 802.16j:2009 局域网和城域网标准.第16部分:固定或移动式宽带的空中接口

This document specifies OFDMA physical layer and medium access control layer enhancements to IEEE Std 802.16 for licensed bands to enable the operation of relay stations. Subscriber station specifications are not changed.

Standard for Local and Metropolitan Area Networks - Part 16: Air Interface for Fixed and Mobile Broadband

YD/T 1838.2-2008 基于CDMA技术的数字集群系统接口技术要求-空中接口.第2部分:MAC层

本部分规定了基于CDMA数字集群通信系统空中接口标准的MAC层技术要求，包括：MAC子层中的所有组成部分实体，在MAC子层内交换的业务接口和原语，MAC子层和其他IS-2000子层之间交换的业务接口和原语。 本部分适用于基于CDMA技术的数字集群系统。

Technical Requirements of Medium Access Control(MAC) for the CDMA-based Digital Trunking Mobile Communication System

YD/T 1838.4-2008 基于CDMA技术的数字集群系统接口技术要求-空中接口.第4部分：层3信令

本部分规定了基于CDMA数字集群通信系统空中接口标准的层3信令技术要求；空中接口层3信令是在蜂窝方式的空中接口层3增加了与集群功能相关的内容，并保持与cdma2000空中接口系列标准的层3内容相兼容，以在集群网络中同时支持CDMA数字集群业务和CDMA普通电话类业务。 本部分适用于基于CDMA技术的数字集群系统。

Technical Requirements of Upper Layer(Layer 3) Signaling for the CDMA-based Digital Trunking Mobile Communication System

YD/T 1838.1-2008 基于CDMA技术的数字集群系统接口技术要求-空中接口.第1部分:物理层

本标准规定了基于CDMA数字集群通信系统的移动台和基站的发射机频率要求、物理信道的调制特性要求、物理信道的调制特性要求、与MAC层接口要求、发射机和接收机性能要求等空中接口标准的物理层技术要求。 本标准适用于基于CDMA技术的数字集群通信系统。

Technical Requirements of Physical Layer for the CDMA-based Digital Trunking Mobile Communication System

YD/T 1837-2008 基于CDMA技术的数字集群系统接口测试方法-基站子系统与核心网间接口

本标准规定了基于CDMA技术的数字集群移动通信网基站子系统与核心网间接口(A10d/A11d)的测试方法和要求。 本标准适用于基于CDMA技术的数字集群通信系统。

Testing Methods for Interface Between BSS and CN for the CDMA-based Digital Trunking Mobile Communication System

YD/T 1836-2008 基于CDMA技术的数字集群系统接口技术要求-基站子系统与核心网间接口

本标准规定了基于CDMA技术的数字集群系统中基站子系统与核心网间接口的原则和技术要求。 本标准适用于基于CDMA技术的数字集群通信系统。

Technical Requirements of Interface Between BSS and CN for the CDMA-based Digital Trunking Mobile Communication System

YD/T 1835-2008 基于CDMA技术的数字集群系统接口测试方法-调度子系统接口

本标准规定了基于CDMA技术的数字集群移动通信系统的调度子系统接口要求，具体包括子系统中的PDS与DAS的接口（PD接口）测试规范和PDS与PHR的接口（RADIUSd接口）测试规范。 本标准适用于基于CDMA技术的数字集群通信系统。

Test Methods of Dispatch Service Subsystem(DSS) Interface for the CDMA-based Digital Trunking Mobile Communication System

YD/T 1834-2008 基于CDMA技术的数字集群系统接口技术要求-调度子系统接口

本标准规定了基于CDMA技术的数字集群移动通信系统的调度子系统接口要求，包括接口消息流程、消息定义及其信息元素的编码格式。 本标准适用于基于CDMA技术的数字集群通信系统。

Test Methods of Dispatch Service Subsystem(DSS) Interface for the CDMA-based Digital Trunking Mobile Communication System

YD/T 1839-2008 基于CDMA技术的数字集群系统接口测试方法-空中接口

本标准规定了基于CDMA技术的数字集群系统移动台与基站子系统之间接口的测试方法和要求。 本标准适用于基于CDMA技术的数字集群通信系统。

Test Spectifications of Air interface for the CDMA-based Digital Trunking Mobile Communication System

YD/T 1838.3-2008 基于CDMA技术的数字集群系统接口技术要求-空中接口.第3部分:LAC层

本部分规定了基于CDMA数字基群通信系统空中接口标准的LAC层技术要求，包括层2链路接入控制（LAC）的信令协议结构和功能。 本部分适用于基于CDMA技术的数字集群系统。

Technical Requirements of Link Access Control(LAC) for the CDMA-based Digital Trunking Mobile Communication System

NF Z82-814-1:2008 异步传输模式(ATM)网络接口(AINI)信号传输规范的ETSI核准本.第１部分:协议规范[ATM论坛规范ATM网络接口(AINI)F-CS-0125.000 (1999)、修订版］

ETSI endorsement of ATM inter-network interfaced (AINI) signalling specification - Part 1 : protocol specification (ATM Forum Specification ATM Inter-Network Interface (AINI) F-CS-0125.000 (1999), modified).

ITU-T Y.1292-2008 自定义互联网协议(IP)网络(CIP).关于与用户互联网协议(IP)业务网络的定制有关的要求和性能框架.13号研究组

Recommendation ITU-T Y.1292 describes the framework for requirements and capabilities to enable the customization of IP networks and related IP service and IP transfer capability to meet the customer's needs. Such a framework includes the service requirements and functional requirements and capabilities as well as the architectural considerations.

Customizable IP networks (CIP): Framework for the requirements and capabilities related to the customization of IP service networks by customers Study Group 13

ITU-T H.351-2008 多媒体终端和系统目录用语义网接口(SWIM-D)

This Recommendation describes a markup vocabulary for XHTML documents representing white page directory information for multimedia terminals and systems. It describes a URL syntax that supports directory searching. It also enumerates client and server behaviours necessary to support SWIM-D interaction effectively. The purpose of this Recommendation is to provide a framework for structured directory browsing when the underlying data structures are not known, such as when publishing directories of people, places and virtual organizations. This Recommendation does not describe directory structures or directory access protocols. This Recommendation is related to other [ITU-T H.350] series Recommendations. While H.350.1 through H.350.7 describe directory schemas for various protocols that can drive call signalling engines directly, this Recommendation is intended for higher level access to directory data for white pages browsing only. [ITU-T E.115] describes a computerized directory assistance protocol for information exchange among service providers in support of assistance/inquiry services. White pages implementers should review all of these related documents for applicability.

Semantic web interface for multimedia terminal and system directories (SWIM-D) Study Group 16

ANSI/INCITS 441-2008 自动控制/驱动接口命令.2(ADC-2)

This standard defines the model and command set extensions to facilitate operation of automation/drive interfacedevices. The clauses of this standard, implemented in conjunction with the applicable clauses of SPC-3, fullyspecify the standard command set for automation/drive interface devices.The objective of this standard is to provide the following:a) permit an application client to communicate over a SCSI service delivery subsystem, with a logical unit thatdeclares itself to be an automation/drive interface device in the PERIPHERAL DEVICE TYPE field of thestandard INQUIRY data (see SPC-3);b) define commands unique to the automation/drive interface device type; andc) define commands and parameters to manage the operation of the automation/drive interface device typeand the operation of logical units of other specific device types that are present in the same device as theautomation/drive interface logical unit.The following commands, parameter data, and features defined in previous versions of this standard are madeobsolete by this standard: Linked commands.Figure 1 shows the relationship of this standard to the other standards and related projects in the SCSI family ofstandards as of the publication of this standard.Figure 1 is intended to show the general relationship of the documents to one another. Figure 1 is not intended toimply a relationship such as a hierarchy, protocol stack, or system architecture. It indicates the applicability of astandard to the implementation of a given transport.Commands in this standard do not require the use of a specific SCSI transport protocol.

Automation/Drive Interface Commands - 2 (ADC-2)

YD/T 1795-2008 2GHz TD-SCDMA/WCDMA数字蜂窝移动通信网网络管理技术要求.网元直连接口功能

本标准规定了2GHz数字蜂窝移动通信网(以下简称3G）网络管理中采用WCDMA Release99技术和TD-SCDMA Release4技术的网元直联接口功能需求。 本标准适用于2GHz数字蜂窝移动通信网WCDMA Release99、TD-SCDMA Release4系统的网络管理。

Network Management Technical Requirement for 2GHz TD-SCDMA/WCDMA Digital Cellular Mobile Communication Network Element Direct Connection Interface Function

ITU-T G.703 CORR 1-2008 分层数字接口的物理/电特性.勘误1.15号研究组

This corrigendum contains material to correct ITU-T Recommendation G.703 (2001), Physical/electrical characteristics of hierarchical digital interfaces.

Physical/electrical characteristics of hierarchical digital interfaces Corrigendum 1 Study Group 15

ITU-T G.959.1-2008 光学传输网络物理层接口

This Recommendation provides physical layer inter-domain interface (IrDI) specifications for optical networks which may employ wavelength division multiplexing (WDM). The physical layer specifications are valid for non-OTN IrDIs, while also allowing application on OTN IrDIs according to [ITU-T Rec. G.709]/Y.1331. In the case of a non-OTN IrDI, OTN management capabilities are not required. The IrDIs within the optical transport network (OTN) are provided by unidirectional, point-to-point, single and multichannel line systems. Their primary purpose is to enable transversely compatible interfaces to span the boundary between two administrative domains. The IrDI specifications include intra-office, short-haul and long-haul applications, without line amplifiers. NOTE – For the purposes of this Recommendation, the term "Administrative domain" is understood to mean the extent of resources which belong to a single player such as a network operator, a service provider, or an end-user. Administrative domains of different players do not overlap among themselves. The specifications are organized according to application codes, which take into account the many possible combinations of channel counts, optical tributary signal types, span distances, fibre types and system configurations. The reference configuration and application codes form the foundation for specifying the optical networking physical layer parameters. In this Recommendation the use of an optical supervisory channel has not been considered. Future versions and other new Recommendations will further address this aspect of the OTN, possibly involving an arrangement of optical network elements on either side of an optical subnetwork interface that is more complex than point-to-point. For these applications, different parameters beyond those specified for a point-to-point configuration may be required. This Recommendation presumes that the optical tributary signals transported within optical channels are digital rather than analogue. Specifications for systems enabling transport of analogue optical tributary signals are for further study.

Optical transport network physical layer interfaces Study Group 15

ANSI C12.22-2008 数据通信网络接口连接用协议规范

This document defines interfaces between ANSI C12.19 devices and network protocols.

Protocol Specification for Interfacing to Data Communication Networks

ANSI/ATIS 0300227-2008 运行、管理、维修和保障(OAM&P).通过管辖界限支持故障管理的操作系统间接口用通用网络模型的扩展

Operations, Administration, Maintenance, and Provisioning (OAM&P) - Interfaces between Operations Systems across Jurisdictional Boundaries to Support Fault Management (Trouble Administration)

ANSI/ATIS 1000028-2008 IP装置(SIP UA)和网络接口标准

IP Device (SIP UA) to Network Interface Standard