共找到 174 条与 载波通信设备 相关的标准,共 12 页
The equipment described below is compatible with the measuring method described in Annex A to this Recommendation.
FREQUENCY SHIFT MEASURING EQUIPMENT FOR USE ON CARRIER CHANNELS
CCITT Recommendation Character error rate objective for telegraph communication using 5-unit start-stop equipment, Vol. II, Rec. F.lO.
Assumptions for the Calculation of Noise on Hypothetical Reference Circuits for Telephony - International Analogue Carrier Systems (Study Group XV) 9 pp
This Recommendation concerns translating equipments with the exception of: - channel-translating equipment, in respect of which Recommendations G.232, G.234 Il] and G.235 should be consuIted; - equipment for translation into the line-frequency band; the Recommendations relating to the various line systems should be consulted.
Recommendations Concerning Translating Equipments - International Analogue Carrier Systems (Study Group XV) 10 pp
that in Europe, and also in other parts of the world, there is a vast international telecommunication network which (as well as national networks) has been established in conformity with the Recommendations of the CCI?T, particularly as far as the freque
Methods of Interconnection - International Analogue Carrier Systems (Study Group XV) 2 pp
The CCIR issued Recommendations 380 [i] and 381 [2] so that, as far as possible, radio-relay links using frequency-division multiplex should have characteristics which allow direct interconnection at baseband frequencies with systems of the same capacity
Interconnection at Audio-Frequencies - International Analogue Carrier Systems (Study Group XV) 2 pp
The CCITT, considering it is considered necessary to introduce, for international traffic, an open-wire carrier system that uses common line repeaters for telephone and interband telegraph channels. This is important for some Administrations that desire to have a small number of telegraph channels (up to six) without having to use a standard voice-frequency telegraph system on one of the telephone circuits, thereby effecting an economy, as all the telephone circuits are retained entirely for telephone traffic.
INTERBAND TELEGRAPHY OVER OPEN - WIRE 3-CHANNEL CARRIER SYSTEMS
本标准适用于预期寿命服从指数分布的载波通信设备的可靠性鉴定试验和可靠性验收试验。也适用于对已经定型投产的载波通信设备的可靠性测定试验。 本标准不适用于载波通信设备的可靠性增长试验。 本标准参照采用MIL-STD-781C《可靠性设计鉴定试验及产品验收试验(指数分布)》。
Test methods of reliability for carrier communication equipment
General technical requirement for supporting carrier communication equipment for standard coaxial integrated communication cables
Provides specific information on application, properties and performance of these systems and associated equipment and on precautions to be taken in order to ensure that PLC radiations do not interfere with other radiocommunication services. Several tabl
Planning of (single-sideband) power line carrier systems
The CCIR, CONSIDERING that although for conventional radiotelephone systems a level of -26 dB appears, theoretically, to be adequate, operational experience shows that significant improvements in operational time are secured with higher levels; that for radiotelephone systems employing a frequency-modulated control channel, further protection of the pilot carrier is necessary to ensure end-to-end circuit gain stability.
PILOT CARRIER LEVEL FOR HF SINGLE-SIDEBAND AND INDEPENDENT-SIDEBAND REDUCED-CARRIER SYSTEMS
The CCIR, CONSIDERING that although for conventional radiotelephone systems a level of -26 dB appears, theoretically, to be adequate, operational experience shows that significant improvements in operational time are secured with higher levels; that for radiotelephone systems employing a frequency-modulated control channel, further protection of the pilot carrier is necessary to ensure end-to-end circuit gain stability.
Pilot Carrier Level for HF Single-Sideband and Independent-Sideband Reduced-Carrier Systems - Section 3Aa - Technical Characteristics
Establishes definitions, requirements, methods of testing and rated values for this equipment. Gives details as to use under outdoor conditions, at a height above sea level not exceeding 1000 m and an ambient temperature between -25 degrees centigrade an
Coupling devices for power line carrier systems
Definitions, general requirements for main coil, tuning device and protective device; blocking requirements, temperature rise, ability to withstand short circuit, insulation level, tensile strength of suspension system. Rating plates, type and routine tests. Recommended values of rated quantities.
Specification for line traps for power line carrier systems
Design for carrier system of single-sideband power line
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号