M38 数字通信设备 标准查询与下载



共找到 208 条与 数字通信设备 相关的标准,共 14

本标准规定了中低端路由器涉及网络与信息安全方面的测试内容,包括数据转发平面安全测试、路由/控制平面安全测试和管理平面安全测试。 本标准适用于基于IPv4的中低端路由器设备。

Router security test methods--middle/low end router(IPv4)

ICS
33.040
CCS
M38
发布
2006-05-31
实施
2006-10-01

This Recommendation specifies the elements of DCME using 16 kbit/s LD-CELP, Digital Speech Interpolation (DSI) and Facsimile Demodulation/Remodulation in order to achieve interworking of such equipment. It specifies extensions and deviations for ITU-T Recs G.763 and G.766 which specify a 32 kbit/s ADPCM DCME, and Facsimile Demodulation/Remodulation.

Digital circuit multiplication equipment using 16 kbit/s LD-CELP, digital speech interpolation and facsimile demodulation/remodulation Corrigendum 1

ICS
CCS
M38
发布
2006-05-01
实施

This Recommendation specifies the elements of DCME using 16 kbit/s LD-CELP, Digital Speech Interpolation (DSI) and Facsimile Demodulation/Remodulation in order to achieve interworking of such equipment. It specifies extensions and deviations for ITU-T Recs G.763 and G.766 which specify a 32 kbit/s ADPCM DCME, and Facsimile Demodulation/Remodulation.

Digital circuit multiplication equipment using 16 kbit/s LD-CELP, digital speech interpolation and facsimile demodulation/remodulation Corrigendum 1

ICS
CCS
M38
发布
2006-05-01
实施

This Recommendation specifies the elements of DCME using 16 kbit/s LD-CELP, Digital Speech Interpolation (DSI) and Facsimile Demodulation/Remodulation in order to achieve interworking of such equipment. It specifies extensions and deviations for ITU-T Recs G.763 and G.766 which specify a 32 kbit/s ADPCM DCME, and Facsimile Demodulation/Remodulation.

Digital circuit multiplication equipment using 16 kbit/s LD-CELP, digital speech interpolation and facsimile demodulation/remodulation Corrigendum 1

ICS
CCS
M38
发布
2006-05-01
实施

本标准规定了具有ISDN功能交换机LT“U”接口对用户侧供电的配置、供电功率、输出电压、输出电流、保护门限和相关的检测方法。 本标准适用于ISDN功能交换机及其相关的NT1、NT1+等网络终端设备、ISDN终端设备和需要网络侧(局端)远供电的基本速率数字传输系统。 本标准也可以作为使用金属本地线路ISDN数字传输系统远供电要求的依据。 本标准规定的供电参数是依据我国用户线路系统(见本标准3.1 c))提出的,但不排出其间介入再生中继器的应用方式。 对于受电设备或系统对自交换机LT“U”接口获取电能使用量值的分配本标准不做规定。

The specification for user power feeding of ISDN basic access U interface on the switch

ICS
33.040
CCS
M38
发布
2005-05-11
实施
2005-11-01

This Recommendation describes the high quality Adaptive Multi-rate Wideband (AMR-WB) encoder and decoder that is primarily intended for 7 kHz bandwidth speech signals. AMR-WB operates at a multitude of bit rates ranging fi-om 6.6 kbith to 23.85 kbith. The bit rate may be changed at any 20 ms fi-ameboundary.

Wideband coding of speech at around 16 kbit/s using Adaptive Multi-rate Wideband (AMR-WB) - SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS - Digital terminal equipments - Coding of analogue signals by methods other than PCM (Study

ICS
CCS
M38
发布
2004-06-29
实施

Tests have been performed to assess the effects that emissions from digital communication systems have on three maritime radionavigation radars that operate with a primary allocation in the 2 900-3 100 MHz band and two radars that operate with primary allocation in the 9 200-9 500 MHz band. The radars were International Maritime Organization (IMO) SOLAS1compulsory carriage category maritime radionavigation radars that employ scan rates, pulse widths, PRFs, IF bandwidth, noise figure, and antenna beamwidths typical of those identified in Recommendation ITU-R M.1313. These radars are representative of the types being used by the United States Coast Guard for shipboard navigation, by the commercial shipping industry, and recreational boaters as well. The radars operating in the 2 900-3 100 MHz band are identified as Radars A, B and C in this Report and the 9 200-9 500 MHz radars are identified as Radars D and E.

Test results illustrating the susceptibility of maritime radionavigation radars to emissions from digital communication and pulsed systems in the bands 2 900-3 100 and 9 200-9 500 MHz

ICS
CCS
M38
发布
2004-01-01
实施

This Part A considers the situation where a digital fixed link receives interference from radio (natural) noise plus an unwanted interferer of power set at 6 dB above the natural noise. Current fixed link assignment strategies are commonly noise limited. This means that the minimum receiver signal level under fading is set to a particular level with respect to the system noise floor and the ambient noise. The assignments are then planned such that the maximum level of an unwanted signal is set by a protection ratio that results in the unwanted signals typically being approximately 6 dB below the noise. This approach is relatively safe and easy to define, but suffers from being sub-optimum. It is advantageous in maximizing the number of links that can be accommodated in a given band and geographical area to arrange that systems are interference limited. In other words, that the unwanted signals, not natural noise, set the environmental noise floor. Such a strategy brings forth the need to assess the performance of fixed-link receivers in the presence of unwanted signals of other modulation schemes as well as Gaussian noise.

The effect on digital communications systems of interference from other modulation schemes

ICS
CCS
M38
发布
2004-01-01
实施

This annex specifies the packet structure for the carriage of G.726 audio, along with the capability identifier and parameters for H.245, in order to use G.726 between multimedia communication systems that utilize H.245.

40, 32, 24, 16 kbit/s Adaptive Differential Pulse Code Modulation (ADPCM) Annex B. Packet format, capability indentifier and capability parameters for H.245 signalling SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Digital terminal

ICS
CCS
M38
发布
2003-07-01
实施

This annex specifies the packet structure for the carriage of G.726 audio, along with the capability identifier and parameters for H.245, in order to use G.726 between multimedia communication systems that utilize H.245.

40, 32, 24, 16 kbit/s ADAPTIVE DIFFERENTIAL PULSE CODE MODULATION (ADPCM) ANNEX A: EXTENSIONS OF RECOMMENDATION G.726 FOR USE WITH UNIFORM-QUANTIZED INPUT AND OUTPUT

ICS
CCS
M38
发布
2003-07-01
实施

This annex specifies the packet structure for the carriage of G.726 audio, along with the capability identifier and parameters for H.245, in order to use G.726 between multimedia communication systems that utilize H.245.

40, 32, 24, 16 kbit/s Adaptive Differential Pulse Code Modulation (ADPCM) Annex B: Packet format, capability identifier and capability parameters for H.245 signalling

ICS
CCS
M38
发布
2003-07-01
实施

本标准规定了基带调制解调器的接口电气性能、线路传输性能、安全性能、电力线防护性能、环境 适应性、设备防雷性能及电磁兼容性等检验技术要求和测试方法。 本标准适用于采用 2BI1Q、PAM 等调制方式、在普通电话双绞线两线专线上、双向对称传输 Wx 64kbit/s 速率数据信号的调制解调设备。

Technical specification and testing method for N×64bit/s baseband modem

ICS
33.050.01
CCS
M38
发布
2003-06-04
实施
2003-06-04

The expanded use and the increased number of charge cards require Card Issuers (or authorized agents) to implement adequate security against fraudulent use. Therefore, a critical facet in the provision of such a system is the ability to ensure the validit

Orbital locations of data relay satellites to be protected from the emissions of fixed service systems operating in the band 25.25-27.5 GHz Question ITU-R 118/7

ICS
33.060.20
CCS
M38
发布
2003-01-01
实施

The goals, scope, and intended audience of the handbook are described in this chapter. Included are references to industry standardization efforts related to the goals of this handbook. Also provided is an overview of each chapter of the handbook.

DOCUMENTATION OF DIGITAL ELECTRONIC SYSTEMS WITH VHDL

ICS
33.050.10
CCS
M38
发布
2002-09-26
实施

This Recommendation provides performance objectives and procedures for provisioning and maintenance of IP-based networks. It focuses attention on parameters that significantly affect the quality of service perceived by the customer, and the methods of measuring those parameters. These include those parameters that affect delay performance at the application layer. Performance limits for temporary dial-up access links, end-customer owned portions and MPLS networks are not covered by this Recommendation and are for further study. However, the performance of fixed access links, whose routing does not change, is covered.

Performance objectives and procedures for provisioning and maintenance of IP-based networks

ICS
CCS
M38
发布
2002-07-01
实施

This Recommendation provides performance objectives and procedures for provisioning and maintenance of IP-based networks. It focuses attention on parameters that significantly affect the quality of service perceived by the customer, and the methods of measuring those parameters. These include those parameters that affect delay performance at the application layer. Performance limits for temporary dial-up access links, end-customer owned portions and MPLS networks are not covered by this Recommendation and are for further study. However, the performance of fixed access links, whose routing does not change, is covered.

Performance objectives and procedures for provisioning and maintenance of IP-based networks

ICS
CCS
M38
发布
2002-07-01
实施

Defines the requirements for an equipment to measure error performance of digital systems at the hierarchical bit rates between 1.5 and 140 Mbit/s.

General Requirements for Instrumentation for Performance Measurements on Digital Transmission Equipment Corrigendum 1 Study Group 4

ICS
CCS
M38
发布
2002-05-01
实施

Defines the requirements for an equipment to measure error performance of digital systems at the hierarchical bit rates between 1.5 and 140 Mbit/s.

General Requirements for Instrumentation for Performance Measurements on Digital Transmission Equipment Corrigendum 1 Study Group 4

ICS
CCS
M38
发布
2002-05-01
实施

This amendment provides an ability to send supplemental "content description data"within H.262 video elementary streams.The content description data that can be carried includes picture capture timing information,additional pan-scan parameters,an indication of the visual active region within the video picture,and a coded representation of the picture size in bytes.

Content description data (Study Group 16)

ICS
CCS
M38
发布
2002-04-22
实施

that the use of radio grows steadily; b) that digital signals are being widely used; c) that an increasingly large number of devices can be used without benefit of a licence or certification process, preventing any administration to identify their emiss

Technical identification of digital signals

ICS
CCS
M38
发布
2002-01-01
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号