共找到 766 条与 电话通信设备 相关的标准,共 52 页
Addresses the technical issues associated with Customer Premise Equipment (CPE) for on-hook signaling, with or without power ringing, which is able to decode data frames packaged in a Single Data Message Format (SDMF), or a Multiple Data Message Format (MDMF). Specifically, establishes formal criteria for Frequency Shift Keying (FSK) signals and protocol capable of being received by such CPE. This standard was first listed for public review in the May 23, 1997 issue of Standards Action. It is being resubmitted now due to substantive changes to the text.
Telecommunications - Telephone Terminal Equipment - Type 1 Caller Identity Equipment Performance Requirements
ITU (International Telecommunication Union) is the United Nations Specialized Agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of the ITU. The ITU-T is responsible for studying techni
Example of Linking Options between Annexes of ITU-T Recommendation J.112 and Annexes of ITU-T Recommendation J.83 - Series J: Transmission of Television Sound Programme and Other Multimedia Signals Study Group 9; 9 pp
Terminal Support Interface for Harmonized Analogue PSTN Terminals (V1.1.1)
2-Wire Analogue Voice Band Interfaces; Loop Disconnect (LD) Dialling Specific Requirements
General Technical Specification for Telephone Switching Equipment of the Ministry of Posts and Telecommunications (Internal Standard)
Correction Sheet.Determines the loudness rating of partial and complete telephone connections. For complete telephone connections, comprising overall and sidetone transmission paths, the procedures involve measurement of acoustic input and output pressures. For partial telephone connections comprising transmitting, receiving, or connection paths, the procedures involve measurement of acoustics pressures and electric voltages.
Method for determining objective loudness ratings of telephone connections; Correction
Essential requirements for a handset telephony facility provided by terminal equipment intended for direct connection to an analogue interface of the public switched telephone network
本标准规定了投币电话机的技术要求、试验方法、检验规则、标志、包装、运输和储存。 本标准可作为投币电话机设计、生产和质量检验的技术依据。 本标准适用于接人公用电话交换网使用的投币电话机(包括有人值守室内投币电话机和无人值守室外投币电话机)。
The specifications for coin box telephone set
The document specifies the electrical characteristics for the electrical coupling of the telephone function implemented in terminal equipment to hearing aids.
Terminal Equipment (TE) - Telephony for the hearing impaired - Electrical coupling of telephone sets to hearing aids; English version ETS 300679:1996
本标准规定了船用声力电话机的分类、技术要求、试验方法、检验规则等。 本标准适用于船用声力电话机。
Sound powered telephone sets in ships
Public Switched Telephone Network (PSTN); Protocol Over the Local Loop for Display and Related Services; Terminal Equipment Requirements; Part 1: Off-Line Data Transmission
In this Recommendation, the expression “Administration” is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.
Physical Plane for Intelligent Network Capability Set 2 - Series Q: Switching and Signalling Intelligent Network Study Group 11; 16 pp
Public Switched Telephone Network (PSTN) Category II Specification for 300 bit/s Duplex Modems Standardized for Use on the PSTN (Second Edition)
本标准规定了IC卡公用付费电话系统检测规程的术语和符号,技术要求和测试方法适用于接人我国电话网的各种IC卡公用付费电话机。可作为进网检验、产品交验的技术依据。
IC card payphone system test procedure telephone part
The document specifies the technical characteristics required for end-to-end interworking over the public switched telephone network of 14400, 12000 9600,7200 and 4800 bit/s duplex modems.
Public Switched Telephone Network (PSTN) - Category II specification for 14400, 12000, 9600, 7200 and 4800 bits per second duplex modems standardized for use on the PSTN; English version ETS 300492:1996
Public Switched Telephone Network (PSTN); Category II Specification for 300 bit/s Duplex Modems Standardized for Use on the PSTN Second Edition
Centralized Billing Centralized Management Automatic Telephone Billing System Technical Requirements (Provisional Provisions) (Internal Standard)
Standard for Cherk and Acceptance of Telecommunications Facilites in Civic Residential District and Office Buildinge
Public Switched Telephone Network (PSTN); Protocol over the Local Loop for Display and Related Services; Terminal Equipment Requirements; Part 1: off-Line Data Transmission
Stage 3 Description for Community of Interest Supplementary Services Using B-ISDN Digital Subscriber Signalling System No.2 (DSS 2): Closed User Group (CUG) - Series Q: Switching and Signalling Broadband ISDN - B-ISDN Application Protocols for Access Sig
Stage 3 Description for Community of Interest Supplementary Services Using B-ISDN Digital Subscriber Signalling System No.2 (DSS 2): Closed User Group (CUG) Study Group 11; 27 pp
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号