N04 基础标准与通用方法 标准查询与下载

BS EN 13757-1:2003 仪表及其远程读数的通信系统.数据交换

Communication system for meters and remote reading of meters - Data exchange

BS EN 13757-1:2002 仪表及其远程读数的通信系统.数据交换

This document describes the data exchange and communications for meters and remote reading of meters in a generic way. It is part 1 of the EN 13757 Standard. Additional parts are: EN 13757 part 2: Physical and link layer, twisted pair baseband (M-Bus) EN 13757 part 3: Dedicated application layer (M-Bus) EN 13757 part 4: Wireless meter readout The main use of part 1 is to provide a protocol specification for the Application Layer for meters. Remark: Electricity meters are not covered with this standard, as the standardisation of remote readout of electricity meters is a task for IEC/CENELEC.

Communication system for meters and remote reading of meters - Data exchange

BS EN 13160-3:2003 检漏系统.水箱的液体系统

This European Standard specifies the requirements for leak detection systems - class II for use with double-skin tanks designed for water polluting fluids.

Leak detection systems - Liquid systems for tanks

DIN EN ISO 10360-1:2003 产品几何量规范(GPS).坐标测量仪(CMM)验收和再检定试验.第1部分:术语

This part of ISO 10360 establishes for coordinate measuring machines (CMM), and their acceptance and reverification tests.#,,#

Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000 + Corr 1:2002) (includes Corrigendum AC:2002); German version EN ISO 10360-1:2000 + AC:2002

BS EN 13509:2003 阴极保护测量方法

This European Standard deals with the cathodic protection against corrosion of buried or immersed metallic structures, detailing the measuring methods to be used for assessing the effectiveness of cathodic protection as well as the measurements and measures taken to monitor cathodic protection during operation. Throughout the text, the measurement techniques are described primarily for pipelines. However, they are sufficiently general to apply to other kinds of buried or immersed (except offshore) structures. General principles with regard to cathodic protection are described in EN 12954. Other measurement methods specific to particular cases are described in other European Standards e.g. prEN 50162.

Cathodic protection measurement techniques

BS EN 13160-7:2003 检漏系统.填隙空间、泄漏防护衬和泄漏防护套的一般要求和试验方法

This European Standard specifies the type test of the interstitial space and the general requirements and test methods for leak protecting linings and leak protecting jackets which are parts of leak detection systems.

Leak detection systems - General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets

BS EN 13160-6:2003 检漏系统.监测井中传感器

This European Standard specifies the requirements for leak detection systems - class V for use with systems designed for fuels which are flammable, having a flash point up to but not exceeding 100 ℃.

Leak detection systems - Sensors in monitoring wells

BS EN 13160-4:2003 检漏系统.泄漏污染物或填隙空间用液体和/或蒸气传感器系统

This European Standard specifies the requirements for leak detection systems - class III for use in the interstitial space of double-skin systems or in leakage containments of single skin systems designed for water polluting fluids. This European Standard is not applicable to leak detection systems using non re-usable sensors.

Leak detection systems - Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces

BS EN 13160-1:2003 检漏系统.一般原理

This European Standard specifies the general principles for leak detection systems for use with double-skin tanks, single-skin tanks and pipework designed for water polluting fluids.

Leak detection systems - General principles

BS EN 13160-2:2003 检漏系统.压力和真空系统

This European Standard specifies the requirements for leak detection systems class I for use with double-skin systems, designed for water polluting fluids.

Leak detection systems - Pressure and vacuum systems

BS CWA 14747-1:2003 人道主义排雷行动.试验和评估.金属探测器

Humanitarian mine action - Test and evaluation - Metal detectors

DIN EN ISO 10360-4:2003 产品几何量规范(GPS).坐标测量仪(CMM)验收和再检定试验.第4部分:扫描型坐标测量仪

This part of ISO 10360 specifies the acceptance test which verifies that the performance of a CMM used in scanning measuring mode is as stated by the manufacturer. It also specifies the reverification test which enables the user to periodically reverify the performance of a CMM used in scanning measuring mode. The acceptance test and reverification test described in this part of ISO 10360 are applicable only to CMMs capable of performing scannings using any type of contacting probing system(s).

Geometrical Product Specifications (GPS) - Acceptance test and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning mode (ISO 10360-4:2000 + Cor. 1:2002) (includes Corrigendum AC:2002); German version EN ISO 10360-4

BS IEC 61511-3:2003 功能安全.加工工业部门的安全测量系统.所要求的安全完整性等级的测定指南

This part of IEC 61511 provides information on – the underlying concepts of risk, the relationship of risk to safety integrity, see Clause 3; – the determination of tolerable risk, see Annex A; – a number of different methods that enable the safety integrity levels for the safety instrumented functions to be determined, see Annexes B, C, D, E, and F. In particular, this part a) applies when functional safety is achieved using one or more safety instrumented functions for the protection of either personnel, the general public, or the environment; b) may be applied in non-safety applications such as asset protection; c) illustrates typical hazard and risk assessment methods that may be carried out to define the safety functional requirements and safety integrity levels of each safety instrumented function; d) illustrates techniques/measures available for determining the required safety integrity levels; e) provides a framework for establishing safety integrity levels but does not specify the safety integrity levels required for specific applications; f) does not give examples of determining the requirements for other methods of risk reduction. Annexes B, C, D, E, and F illustrate quantitative and qualitative approaches and have been simplified in order to illustrate the underlying principles. These annexes have been included to illustrate the general principles of a number of methods but do not provide a definitive account. NOTE Those intending to apply the methods indicated in these annexes should consult the source material referenced in each annex. Figure 1 shows the overall framework for IEC 61511-1, IEC 61511-2 and IEC 61511-3 and indicates the role that this standard plays in the achievement of functional safety for safety instrumented systems. Figure 2 gives an overview of risk reduction methods.

Functional safety - Safety instrumented systems for the process industry sector - Guidance for the determination of the required safety integrity levels

BS EN ISO 10012:2003 测量管理系统.测量方法和测量设备的要求

ISO 10012:2003 specifies generic requirements and provides guidance for the management of measurement processes and metrological confirmation of measuring equipment used to support and demonstrate compliance with metrological requirements. It specifies quality management requirements of a measurement management system that can be used by an organization performing measurements as part of the overall management system, and to ensure metrological requirements are met. ISO 10012:2003 is not intended to be used as a requisite for demonstrating conformance with ISO 9001, ISO 14001 or any other standard. Interested parties can agree to use ISO 10012:2003 as an input for satisfying measurement management system requirements in certification activities. Other standards and guides exist for particular elements affecting measurement results, for example, details of measurement methods, competence of personnel, interlaboratory comparisons. ISO 10012:2003 is not intended as a substitute for, or as an addition to, the requirements of ISO/IEC 17025.

Measurement management systems - Requirements for measurement processes and measuring equipment

ISO 10012:2003 测量管理系统.测量方法和测量设备的要求

This International Standard specifies generic requirements and provides guidance for the management of measurement processes and metrological confirmation of measuring equipment used to support and demonstrate compliance with metrological requirements. It specifies the quality management requirements of a measurement management system that can be used by an organization performing measurements as part of the overall management system, and to ensure metrological requirements are met. This International Standard is not intended to be used as a requisite for demonstrating conformance with ISO 9001, ISO 14001 or any other standard. Interested parties can agree to use this International Standard as an input for satisfying measurement management system requirements in certification activities. This International Standard is not intended as a substitute for, or as an addition to, the requirements of ISO/IEC 17025. NOTE Other standards and guides exist for particular elements affecting measurement results, for example, details of measurement methods, competence of personnel, and interlaboratory comparisons.

Measurement management systems - Requirements for measurement processes and measuring equipment

JIS Z 8462-2:2003 检测的能力.第2部分:线性校准方法

この規格は，次の目的のための基本的方法を規定する。

Capability of detection -- Part 2: Methodology in the linear calibration case

BS IEC 61511-1:2003 功能安全.加工工业部门用安全仪表化系统.框架、定义、系统、硬件和软件要求

This International Standard gives requirements for the specification, design, installation, operation and maintenance of a safety instrumented system, so that it can be confidently entrusted to place and/or maintain the process in a safe state. This standard has been developed as a process sector implementation of IEC 61508.

Functional safety - Safety instrumented systems for the process industry sector - Framework, definitions, system, hardware and software requirements

DIN V 19249:2003 控制技术.非电动装置、设备、系统以及电动装置的非电动零件的安全性.一般要求

Contains general safety requirements for devices, parts, equipment and systems as well as for non electrically operated parts of electically operated devices for measuring and control.

Control technology - Safety for non-electrically operated devices, equipment and systems, as well as non-electrically operated parts of electrical devices - General requirements

DIN EN 13757-1:2003 仪表及其远程读数通信系统.第1部分:数据交换

This European Standard covers a data exchange protocol for the remote reading of all kinds of meters (water, gas, heat) on the basis of the open communication ISO/OSI layer model. This Standard specifies the application layer but not the physical layer and the properties. It does not cover electricity metering, which is a task of IEC/CENELEC.#,,#

Communication systems for meters and remote reading of meters - Part 1: Data exchange; English version EN 13757-1:2002

ARMY MIL-M-71213 (1)-2003 MK93模型1(双重安装)高射机枪安装

This amendment forms a part of MIL-M-71213 (AR), dated 28 March 1995, and is approved for use by the U.S. Army Armament Research, Development, and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.

MILITARY SPECIFICATION MOUNT, MACHINE GUN: MK93 MOD 1 (DUAL MOUNT)