N13 机械量仪表、自动秤重装置与其他检测仪表 标准查询与下载

DLA DSCC-DWG-87046 REV M-2007 1,000伏直流CG的高压多层陶瓷电容器

This drawing and MIL-PRF-49467 describe the complete requirements for high voltage multilayer ceramic capacitors.

CAPACITORS, CERAMIC, MULTILAYER, HIGH VOLTAGE, CG, 1,000 V DC

DLA DSCC-DWG-87043 REV M-2007 1,000伏直流X7R的高压多层陶瓷电容器

This drawing and MIL-PRF-49467 describe the complete requirements for high voltage multilayer ceramic capacitors.

CAPACITORS, CERAMIC, MULTILAYER, HIGH VOLTAGE, X7R, 1,000 V DC

DLA MIL-DTL-8790 F-2007 场连接负65度到275度温度范围操作,3,000 PSI高液压橡胶软管组装

This specification covers the requirements for hose assemblies, rubber hydraulic, high pressure 3000 psi, operating temperature range -65°F to +275°F.

HOSE ASSEMBLIES, RUBBER, HYDRAULIC, HIGH PRESSURE 3,000 PSI, OPERATING TEMPERATURE RANGE -65癋 TO +275癋, FIELD ATTACHABLE

NAVY QPL-9370-27 NOTICE 1-2007 抗负荷压力自调型自动阀

QPL-9370-27, which identified products qualified under the requirements specified in MIL-DTL-9370, has been transformed to an equivalent qualification data set (QDS).

VALVE, AUTOMATIC, PRESSURE REGULATING, ANTI-G SUIT

JJF 1169-2007 汽车制动操纵力计校准规范

本规范适用于汽车制动操纵力计的校准。汽车制动操纵力计包括行车制动时测量踏板力用的踏板力计和驻车制动时测量操纵力用的手拉力计两类。 本规范规定了汽车制动操纵力计的计量性能及校准方法。

Calibration Specification for Manipulating Force Tester for Automotive Brake

JJF 1168-2007 便携式制动性能测试仪校准规范

本规范适用于便携式制动性能测试仪的校准。 本规范规定了便携式制动性能测试仪的计量性能及校准方法。

Calibration Specification for Portable Braking Performance Tester for Motor Vehicles

JJF 1166-2007 激光扫平仪校准规范

本规范适用于1、2、3级激光扫平仪的校准。

Calibrating Specification for Rotating Lasers

DLA A-A-55564 A VALID NOTICE 1-2007 压敏电阻的一般要求

A-A-55564A, dated 15 February 2002, has been reviewed and determined to be valid for use in acquisition.

RESISTOR, VOLTAGE SENSITIVE (VARISTOR), GENERAL REQUIREMENTS FOR

JJG 404-2008 铁路轨距尺检定器检定规程

本规程适用于标准轨距铁路轨距尺检定器的首次检定、后续检定和使用中检验，也可供其他轨距尺检定器量值溯源时参考。

Calibrator for Railway Track Gage

JJG 219-2008 标准轨距铁路轨距尺检定规程

本规程适用于标准轨距的标尺类、数显类铁路轨距尺（以下简称轨距尺）的首次检定、后续检定和使用中检验，也可供其他铁路轨距尺的量值溯源时参考。

Track Gage for Standard Gauge Railway

NAVY MS24350 REV J NOTICE 3-2007 自动调压抗重力阀

The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change you should verify the currency of the information above using the ASSIST Online database.

VALVE, AUTOMATIC PRESSURE REGULATING ANTI-G SUIT

NAVY MIL-DTL-9370 E-2007 反G自动压力调整阀

This specification covers automatic pressure-regulating valves for anti-g suits.

VALVE, AUTOMATIC, PRESSURE REGULATING, ANTI-G SUIT

DLA MIL-DTL-25677 E-2007 飞机液压油燃料供应的喷嘴盖适配器的一般规定

This specification covers the requirements for an adapter, cap, and nozzle, pressure lubricating oil servicing, aircraft, for ground servicing of aircraft turbine engines.

ADAPTER, CAP, AND NOZZLE, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT, GENERAL SPECIFICATION FOR

ASTM D4753-07 评定、选择和规范土壤、岩石和结构材料测试用天平和标准砝码的标准指南

This guide provides those using standards related to soil, rock, and related construction materials, with a means for selecting the balance required for a particular standard. This guide provides those writing standards pertaining to soil, rock, and related construction materials with a means for specifying the balance capabilities required for a particular standard and for describing the balance selected in a uniform fashion. This guide provides agencies conducting soil, rock, and related construction materials, testing with guidance for selecting and evaluating general purpose balances and standard masses. This guide provides inspection organizations with criteria for evaluating general purpose balances and standard masses. 1.1 This guide provides minimum requirements for general-purpose scales, balances, and standard masses used in testing soil, rock, and related construction materials.1.2 This guide provides guidance for evaluating, selecting, and specifying general purpose scales, balances, and standard masses used in testing soil, rock, and related construction materials.1.3 The accuracy requirements for balances and scales are specified in terms of the combined effect of all sources of error contributing to overall balance performance. The measurement of specific sources of error and consideration of details pertaining to balance construction have been intentionally avoided.1.4 This guide does not include requirements for balances and scales having accuracies greater than those generally required in testing soil, rock, and related construction materials or for research programs or specialized testing requirements.1.5 This guide does not apply to nongraduated balances.1.6 This guide does not address the methods used to verify or quantify specific parameters dealing with balances and scales. For a description of tests used in evaluating balance performance, see NIST Handbook 44.1.7 This guide is not intended to be used as a specification for the purchase of balances and scales. Note 1The National Institute of Standards and Technology (NIST), formerly the National Bureau of Standards (NBS), and the International Organization of Legal Metrology (OIML) publish standards or practices that specify construction requirements as well as performance guides for balances. ASTM, OIML, and NIST publish construction standards and tolerances for standard masses. Note 2The terms "mass" and "determine the mass of" are used in this standard instead of the more commonly used terms "weight" and "weigh" to comply with standard metric practice. In addition, the term "standard mass(es)" is used instead of standard "standard weight(s)" when referring to a piece of material of known specified mass used to compare or measure the mass of other masses.1.8 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgement. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged nor should this document be applied without consideration of a project''s many unique aspects. The word "Standard" in the title of this document means only that the document has been approved through the ASTM consensus process.

Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing

KS B OIMLR 139-1-2006 皮革面积测量仪

이 규격은 상거래와 무역에 이용되는 가죽의 면적을 측정하는 기기(이하 “가죽 측정기”라고

Instruments for measuring the areas of leathers

KS B ISO 8655-2:2006 活塞式容量测量仪器.第2部分:活塞式吸量管

이 규격에 규정한다.-도량형 요구 사항-최대 허용 오차-표시의 요구 사항-사

Piston-operated volumetric apparatus－Part 2：Piston pipettes

KS B OIMLR 44-2006 用于测量酒精米与酒精比重、酒精度的温度计

이 규격은 물과 에탄올 혼합물의 알코올 농도 결정에 사용되는 알코올 비중계, 알코올용 비

Alcoholometers and alcohol hydrometers and thermometers for use in alcoholometry

KS B ISO 8655-1:2006 活塞式容量测量仪器.第1部分:术语、通用要求和用户使用建议

이 규격은 피스톤식 부피 측정 기구의 일반적 요구 사항에 대하여 규정한다. 이것은 피스톤

Piston-operated volumetric apparatus-Part 1:Terminology, general requirements and user recommendations

KS B OIMLR 107-1-2006 非连续累计自动称重仪表(累计料斗秤).第1部分:计量和技术要求.试验

Discontinuous totalizing automatic weighing instruments (totalizing hopper weighers)－Part 1：Metrological and technical requirements－Tests

KS B OIMLR 107-2-2006 非连续累计自动称重仪表(累计料斗秤)第2部分:试验报告格式

이 규격의 시험성적서 양식은 불연속 합산 자동저울(합산 호퍼저울)에 대한 다양한 시험 및

Discontinuous totalizing automatic weighing instruments (totalizing hopper weighers)－Part 2：Test report format