N13 机械量仪表、自动秤重装置与其他检测仪表 标准查询与下载

SN/T 0188.2-2010 进出口商品衡器鉴重规程.第2部分:衡器鉴重通则

本部分规定了以衡器对进出口商品进行重量鉴定的通则。 本部分适用于进出口商品的衡器鉴重。

Rules for the weight survey by weighing instrument on import and export commodities- Part 2: General rules for weight survey by weighing instrument

ISO 25178-6:2010 产品的几何技术规范(GPS).表面纹理:表面的.第6部分:表面纹理测量方法的分类

This part of ISO 25178 describes a classification system for methods used primarily for the measurement of surface texture. It defines three classes of methods, illustrates the relationships between the classes, and briefly describes specific methods.

Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture

IEEE 671/COR 1-2010 非回转惯性角度传感器规范格式指南和试验程序.急跳,加速度,速度和位移.勘误表1:4.7.2.6"短期稳定性"和附件A"传感器动态方框图"

Specification Format Guide and Test Procedure for Nongyroscopic Inertial Angular Sensors: Jerk, Acceleration, Velocity, and Displacement Corrigendum 1: 4.7.2.6 Short-Term Stability and Annex A Sensor Dynamic Block Diagrams

ASTM D3195/D3195M-10 转子流量计校准的标准实施规程

Choice of method depends primarily on which equipment is available. Higher accuracy is possible with the gasometer. The accuracies of the methods of atmospheric analysis, for which the calibration procedure is intended, do not warrant the very highest possible accuracy in flow measurement.1.1 This practice covers the calibration of variable-area flowmeters (rotameters) used to determine air sample volumes at or close to ambient conditions of pressure and temperature, in the analysis of atmospheres for pollutant content. 1.2 Units8212;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Rotameter Calibration

ASME B107.300-2010 扭矩仪

This Standard provides performance and safetyrequirements for manually operated torque instruments,commonly used for mechanical measurement of torquefor control of the tightness of threaded fasteners. It isnot intended to describe products infrequently utilizedor those designed for special purposes.This Standardmay be used as a guide by state authoritiesor other regulatory bodies in the formulation of lawsor regulations. It is also intended for voluntary use byestablishments that use or manufacture the instrumentscovered.

Torque Instruments

CKS 238-2009 患者用磅秤(医用类型)

Covers the dimensional, constructional and performance requirements for the patients' weighing scales of the steelyard, dial and digital indication types (with height-measuring attachment) intended for use in medical institutions.

Weighing scales for patients (doctor's type)

CKS 240-2009 婴儿用磅秤(计数器设计)

Covers the dimensional and constructional requirements for steelyard and dial type baby weighing scales of the counter design, intended for use in medical institutions.

Baby weighing scales (counter design)

ISO/PAS 12868:2009 几何形状产品规格(GPS).坐标测量机(CMM):利用单一触针接触探测系统测试坐标测量机(CMMs)的性能

Geometrical product specification (GPS) - Coordinate measuring machines (CMM): Testing the performance of CMMs using single-stylus contacting probing systems

ISO 10360-2:2009 产品几何技术规范(GPS).坐标测量机(CMMs)的验收和复检.第2部分:用于测量线性尺寸规格的CMMs

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions

BS 7996:2009 扭矩测量装置.使用连续扭矩应用的校准和分类.方法

This British Standard specifies a method for the calibration and classification of torque measuring devices using continuous torque application where the inertial effects are minimal. This includes torque measuring devices used for the calibration of hand torque tools conforming to BS EN ISO 6789, and torque measuring devices conforming to BS 7882. The information to be given on the certificate of calibration is also specified in this standard. Annex A provides diagrams of the continuous application of torque, and examples for the calibration of torque measuring devices. Annex B gives an example of determining uncertainty of the calibration results of the torque measuring device. Annex C shows how to calculate mechanical and electronic bandwidth.

Torque measuring devices - Calibration and classification using continual torque application - Method

JIS B 7441:2009 具有非接触探测系统的三坐标测量机的验证和重新验证测定

This Japanese Industrial Standard specifies the acceptance test and the reverification test for coordinate measuring machines(CMM) with non-contacting probing systems capable of obtaining the form of an object as the three-dimensional coordinate of multipoint group.

Acceptance and reverification tests for coordinate measuring machines (CMM) with non-contacting probing systems

IEEE 836-2009 线性加速度测量仪精密离心试验推荐实施规程

This recommended practice describes the conduct and analysis of precision tests that are to be performed on linear accelerometers using centrifuge techniques. The term “precision,” in this context, refers to tests that are conducted to evaluate accelerometer parameters, as opposed to tests conducted to establish environmental survivability only. Evaluation may take the form of determining the coefficients of the accelerometer’s model equation, except for bias and scale factor, which are most accurately determined by static multiposition tests. Alternatively, evaluation may establish only that the accelerometer output complies with specific error limit criteria.

Recommended practice for precision centrifuge testing of linear accelerometers

DIN EN ISO 8655-6 Berichtigung 1:2009 活塞式容量测量仪器.第6部分:测量误差确定重力方法(ISO 8655-6-2002).德文版本EN ISO 8655-6-2002.勘误表DIN EN ISO 8655-6:2002-12.德文版本EN ISO 8655-6:2002/AC:2009

Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002); German version EN ISO 8655-6:2002, Corrigendum to DIN EN ISO 8655-6:2002-12; German version EN ISO 8655-6:2002/AC:2009

DIN EN ISO 8655-4 Berichtigung 1:2009 活塞式容量测量仪器.第4部分:稀释器(ISO 8655-4-02002),德文版本EN ISO 8655-4-2002.勘误表DIN EN ISO 8655-4-2002-12.德文版本ENISO 8655-4-2002/AC-2009

Piston-operated volumetric apparatus - Part 4: Dilutors (ISO 8655-4:2002); German version EN ISO 8655-4:2002, Corrigendum to DIN EN ISO 8655-4:2002-12; German version EN ISO 8655-4:2002/AC:2009

DIN EN ISO 8655-5 Berichtigung 1:2009 活塞操纵的容量设备.第5部分:分配器.德文版本EN ISO 8655-5-2002.勘误表DIN EN ISO 8655-5-2002-12.德文版本EN ISO 8655-5-2002/AC-2009

Piston-operated volumetric apparatus - Part 5: Dispensers (ISO 8655-5:2002); German version EN ISO 8655-5:2002, Corrigendum to DIN EN ISO 8655-5:2002-12; German version EN ISO 8655-5:2002/AC:2009

DIN EN ISO 8655-1 Berichtigung 1:2009 活塞式容量测量仪器.第1部分:术语,一般要求和用户规范(ISO 8655-1-2002).德文版本EN ISO 8655-1-2002,勘误表DIN EN ISO8655-1-2002-12.德文版本EN ISO 8655-1-2002/AC-2009

Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user specifications (ISO 8655-1:2002); German version EN ISO 8655-1:2002, Corrigendum to DIN EN ISO 8655-1:2002-12; German version EN ISO 8655-1:2002/AC:2009

DIN EN ISO 8655-7 Berichtigung 1:2009 活塞式体积测量仪.第7部分:用于设备性能评定的非重力法(ISO 8655-7-2005).德文版本EN ISO 8655-7-2005.勘误表DIN EN ISO 8655-7-2005-12.德文版本EN ISO 8655-7-2005/AC-2009

Piston-operated volumetric apparatus - Part 7: Non-gravimetric methods for the assessment of equipment performance (ISO 8655-7:2005); German version EN ISO 8655-7:2005, Corrigendum to DIN EN ISO 8655-7:2005-12; German version EN ISO 8655-7:2005/AC:2009

DIN EN ISO 8655-3 Berichtigung 1:2009 活塞式体积测量仪.第3部分:活塞滴定管(ISO 8655-3-2002).德文版本EN ISO 8655-3-2002.勘误表DIN EN ISO 8655-3-2002-12.德文版本EN ISO 8655-3-2002/AC-2009

Piston-operated volumetric apparatus - Part 3: Piston burettes (ISO 8655-3:2002); German version EN ISO 8655-3:2002, Corrigendum to DIN EN ISO 8655-3:2002-12; German version EN ISO 8655-3:2002/AC:2009

DIN EN ISO 8655-2 Berichtigung 1:2009 活塞式体积测量仪.第2部分:活塞吸移管(ISO 8655-2-2002).德文版本EN ISO 8655-2-2002,勘误表DIN EN ISO 8655-2-2002-12.德文版本EN ISO 8655-2-2002/AC-2009

Piston-operated volumetric apparatus - Part 2: Piston pipettes (ISO 8655-2:2002); German version EN ISO 8655-2:2002, Corrigendum to DIN EN ISO 8655-2:2002-12; German version EN ISO 8655-2:2002/AC:2009

JIS E 4603:2009 全部车辆.速度计设备

This Japanese Industrial Standard was established in 1973, and to this day has gone through only one reision,which took place in 1991. The revision at this time is to respond to the application of digital speedometer equipment and the like.

Rolling stock -- Speedometer equipment