N22 电能测量和负荷控制系统 标准查询与下载

IEC 62056-62:2006 电量测量.抄表、电费和负荷控制的数据交换.第62部分:接口分类

This part of IEC 62056 specifies a model of a meter as it is seen through its communication interface(s). Generic building blocks are defined using object-oriented methods, in the form of interface classes to model meters from simple up to very complex functionality.

Electricity metering - Data exchange for meter reading, tariff and load control - Part 62: Interface classes

BS EN 62059-41:2006 电计量设备.可靠性.第41部分:可靠性预测

This part of IEC 62059-41 is applicable to all types of static metering equipment for energy measurement and load control.

Electricity metering equipment - Dependability - Part 41: Reliability prediction

SANS 62055-21:2006 电量测量．支付系统．第21部分：标准化框架

Sets out a framework for the integration of standards into a system specification for electricity payment metering systems. Addresses the payment metering system application process, generic processes, generic functions, data elements, system entities an

Electricity metering - Payment systems Part 21: Framework for standardization

DIN EN 62055-31:2006 电度表.支付系统.第31部分:特殊要求.电度表用固定支付系统(级别1和2)(IEC 62055-31:2005)

Electricity metering - Payment systems - Part 31: Particular requirements - Static payment meters for active energy (classes 1 and 2) (IEC 62055-31:2005); German version EN 62055-31:2005

NF C44-054-11*NF EN 62054-11:2006 交流电量测量.电费和负载控制.第11部分:电子脉动控制接收器的特殊要求

Electricity metering (a.c.) - Tariff and load control - Part 11 : particular requirements for electronic ripple control receivers.

JJG 307-2006 机电式交流电能表检定规程

本规程适用于参比频率为50Hz或60Hz机电式(感应系)交流电能表(简称电能表或受检电能表)的首次检定，不适用于电能表的现场检验。 　　按本规程附录A，对机电式交流有功电能表进行型式评价试验。

Verification Regulation Electromechanical Meters for Measuring Alternating-current Electrical Energy

SANS 62055-31:2006 电量测量．支付系统．第31部分：有功静止式预付费电能表（1级和2级）

Applies to newly manufactured, static watt-hour payment meters of accuracy classes 1 and 2 for direct connection, for the measurement of alternating current electrical energy consumption of a frequency in the range 45 Hz to 65 Hz that include a load swit

Electricity metering - Payment systems Part 31: Particular requirements - Static payment meters for active energy (classes 1 and 2)

SANS 62053-52:2006 电量测量装置（交流）．特殊要求．第52部分：符号

Applies to letter and graphical symbols intended for marking on and identifying the function of electromechanical or static a.c. electricity meters and their auxiliary devices. The symbols specified shall be marked on the name-plate, dial plate, external

Electricity metering equipment (AC) - Particular requirements Part 52: Symbols

SANS 473:2006 大型电力用户自动化抄表

Applies to automated meter reading (AMR) in South Africa for large power users as defined by the relevant electricity supply authority. Does not cover the communication system between the AMR meter and the remote master station.

Automated meter reading for large power users

BS EN 62055-31:2005 电表.付费系统.第31部分:特殊要求.电度表用固定付费系统(1和2类)

This part of IEC 62055 applies to newly manufactured, static watt-hour payment meters of accuracy classes 1 and 2 for direct connection, for the measurement of alternating current electrical energy consumption of a frequency in the range 45 Hz to 65 Hz that include a load switch for the purpose of interruption or restoration of the electricity supply to the load in accordance with the current value of the available credit maintained in the payment meter. It does not apply to static watt-hour payment meters where the voltage across the connection terminals exceeds 600 V (line-to-line voltage for meters for polyphase systems). It applies to payment meters for indoor application only, where the payment meter shall be mounted as for normal service (i.e. together with a specified matching socket where applicable). Payment meters are implementations where all the main functional elements are incorporated in a single enclosure, together with any specified matching socket. There are also multi-part installations where the various main functional elements, such as the measuring element, the user interface unit, token carrier interface, and the load switch are implemented in more than one enclosure, involving additional interfaces. This part of IEC 62055 does not apply to multipart payment metering installations. Functional requirements that apply to payment meters are also defined in this part of IEC 62055, and include informative basic functional requirements and tests for the prepayment mode of operation in Annex A. Allowances are made for the relatively wide range of features, options, alternatives, and implementations that may be found in practice. The diverse nature and functionality of payment meters prevent the comprehensive specification of detailed test methods for all of these requirements. However, in this case, the requirements are stated in such a way that tests can then be formulated to respect and validate the specific functionality of the payment meter being tested. This part of IEC 62055 does not cover specific functionality or performance requirements for safety, circuit protection, isolation or similar purposes that may be specified through reference to other specifications or standards. This part of IEC 62055 does not cover software requirements. Software requirements for basic energy meter metrology are under consideration for the IEC 62059 series of standards, and in other organisations. This part of IEC 62055 covers type-testing requirements only. For acceptance testing, the concepts given in IEC 61358 may be used as a basic guideline. Dependability aspects are addressed in the IEC 62059 series of standards. This part of IEC 62055 does not cover conformity tests and system compliance tests that may be required in connection with legal or other requirements of some markets.

Electricity metering - Payments systems - Part 31: Particular requirements - Static payment meters for active energy (classes 1 and 2)

JJG 597-2005 交流电能表检定装置

本规程适用于参比频率为50Hz或60Hz的交流电能表检定装置(以下简称装置)的型式评价、样机试验、首次检定、后续检定和使用中检验。

Verification Equipment for AC Electrical Energy Meters

KS C IEC 62056-51:2005 电度表.仪表读数、费率和负载控制的数据交换.第51部分:应用层协议

이 기술 보고서는 붕괴된 3계층 모델 내의 하위 계층 프로토콜 및 대응되는 물리적 매체 등

Electricity metering－Data exchange for meter reading, tariff and load control

KS C 1203-2005 电度表.气候性试验方法

이 규격은 전력량계류의 보통 내후형 계기 및 강화 내후형 계기의 내후 성능에 대하여 규정한

Weather-proof performance of electricity meters

GJB/J 5412-2005 宽量程数字RLC测量仪检定规程

本检定规程规定了数字式RLC（或LCR）测量仪的技术要求、检定条件、检定项目、检定方法、 检定结果处理和检定周期。 本检定规程适用于新购买、使用中和修理后的各种数字式RLC测量仪（以下简称RLC测量仪）的检定，也适用于各种数字电容表、数字电感电容表及数字宽频阻抗分析仪的检定。 本检定规程不适用于各种高压电桥和测量频率高于10MHz的RLC测量仪和射频阻抗分析仪。

Verification regulation for wide range digital RLC meter

DL/T 460-2005 交流电能表检验装置检定规程

本标准规定了交流电能表检验装置的计量性能要求、检定条件、检定项目、检定方法及检定结果的处理与检定周期。 本标准适用于使用中供检定0.02级及以下等级的交流电能表用检验装置(以下简称装置)的检定，也适用于修理后装置的验收试验。对新购装置的验收试验可参照执行。

Verification regulation for alternating current electricity meters testing equipment

IEC 62055-31:2005 电度表.支付系统.第31部分:特殊要求.电度表用固定支付系统(级别1和2)

This part of IEC 62055 applies to newly manufactured, static watt-hour payment meters of accuracy classes 1 and 2 for direct connection, for the measurement of alternating current electrical energy consumption of a frequency in the range 45 Hz to 65 Hz that include a load switch for the purpose of interruption or restoration of the electricity supply to the load in accordance with the current value of the available credit maintained in the payment meter. It does not apply to static watt-hour payment meters where the voltage across the connection terminals exceeds 600 V (line-to-line voltage for meters for polyphase systems). It applies to payment meters for indoor application only, where the payment meter shall be mounted as for normal service (i.e. together with a specified matching socket where applicable). Payment meters are implementations where all the main functional elements are incorporated in a single enclosure, together with any specified matching socket. There are also multi-part installations where the various main functional elements, such as the measuring element, the user interface unit, token carrier interface, and the load switch are implemented in more than one enclosure, involving additional interfaces. This part of IEC 62055 does not apply to multi-part payment metering installations. Functional requirements that apply to payment meters are also defined in this part of IEC 62055, and include informative basic functional requirements and tests for the prepayment mode of operation in Annex A. Allowances are made for the relatively wide range of features, options, alternatives, and implementations that may be found in practice. The diverse nature and functionality of payment meters prevent the comprehensive specification of detailed test methods for all of these requirements. However, in this case, the requirements are stated in such a way that tests can then be formulated to respect and validate the specific functionality of the payment meter being tested. This part of IEC 62055 does not cover specific functionality or performance requirements for safety, circuit protection, isolation or similar purposes that may be specified through reference to other specifications or standards. This part of IEC 62055 does not cover software requirements. Software requirements for basic energy meter metrology are under consideration for the IEC 62059 series of standards, and in other organisations. This part of IEC 62055 covers type-testing requirements only. For acceptance testing, the concepts given in IEC 61358 may be used as a basic guideline. Dependability aspects are addressed in the IEC 62059 series of standards. This part of IEC 62055 does not cover conformity tests and system compliance tests that may be required in connection with legal or other requirements of some markets.

Electricity metering - Payment systems - Part 31: Particular requirements - Static payment meters for active energy (classes 1 and 2)

IEC 62053-52:2005 电量测量设备(交流电).特殊要求.第52部分:符号

This part of IEC 62053 applies to letter and graphical symbols intended for marking on and identifying the function of electromechanical or static a.c. electricity meters and their auxiliary devices. The symbols specified in this standard shall be marked on the name-plate, dial plate, external labels or accessories, or shown on the display of the meter as appropriate.

Electricity metering equipment (AC) - Particular requirements - Part 52: Symbols

IEC TR 62055-21:2005 电度表.支付系统.第21部分:标准化框架

Sets out a framework for the integration of standards into a system specification for electricity payment metering systems. It addresses the payment metering system application process, generic processes, generic functions, data elements, system entities

Electricity metering - Payment systems - Part 21: Framework for standardization

KS C IEC 62056-46:2005 电量测量.计数器读数、电费和负载控制的数据交换.第61部分:目标识别系统(OBIS)

이 규격은 connection-oriented를 하는 asychronous communic

Electricity metering－Data exchange for meter reading, tariff and load control－Part 46：Data link layer using HDLC protocol

KS C IEC 62056-52:2005 电度表.仪表读数、费率和负载控制的数据交换.第52部分:管理配电线路信息规范(DLMS)服务器通信协议

이 규격은 KS C IEC 62056-31, KS C IEC 62056-41, KS C I

Electrical metering－Data exchange for meter reading, tariff and load control－Part 52：Communication protocols management distribution line message specification(DLMS) server