N22 电能测量和负荷控制系统 标准查询与下载

DL/T 614-2007 多功能电能表

本标准规定了电力行业在订货、验收、使用多功能电能表时的技术要素，同时规范功能设置。 本标准适用于测量参比频率为50Hz(或60Hz)的单、三相交流电能的安装式多功能电能表(简称电能表)。 本标准仅规定了多功能电能表需具备的功能和必须达到的技术性能，多费率电能表的技术要求可参照本标准相关内容。

Multifunction electricity meterring equipment(A.C.)

SANS 62055-41:2007 电量计量．支付系统．第41部分：标准转账规范（STS）．单向令牌载波系统的应用层协议

Specifies the application layer protocol of the standard transfer specification (STS) for transferring units of credit and other management information from a point-of-sale (POS) system to an STS-compliant payment meter in a one-way token carrier system.

Electricity metering - Payment systems Part 41: Standard transfer specification (STS) - Application layer protocol for one-way token carrier systems

SANS 62055-51:2007 电量计量．支付系统．第51部分：标准转账规范（STS）．单向数字和磁卡令牌载波的物理层协

Specifies a physical layer protocol of the standard transfer specification (STS) for transferring units of credit and other management information between a point-of-sale (POS) system and an STS-compliant electricity payment meter.

Electricity metering - Payment systems Part 51: Standard transfer specification (STS) - Physical layer protocol for one-way numeric and magnetic card token carriers

IEC 61557-6:2007 小于1000V交流和1500V直流的低压配电系统中的电气安全.防护措施的测试、测量或监控用设备.第6部分:TT、TN和IT系统中的有效剩余电流装置(RCD)

This part of IEC 61557 specifies the requirements for measuring equipment applied to the testing of the effectiveness of protective measures by regular disconnections of residual current protective devices (RCD) in TT,TN and IT systems.

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness residual current devices (RCD) in TT, TN and IT systems

IEC 62055-31:2005/COR1:2007 电能测量.付费系统.第31部分:特殊要求.有功电量用静止式付费电表(1和2级).技术勘误1

This standard is Electricity metering - Payment systems - Part 31: Particular requirements - Static payment meters for active energy (classes 1 and 2); Corrigendum 1.

Electricity metering - Payment systems - Part 31: Particular requirements - Static payment meters for active energy (classes 1 and 2); Corrigendum 1

BS EN 62056-53:2007 电量测量.仪表读数,收费和负载控制的数据交换.能源计量用公共规范(COSEM)应用层

This part of IEC 62056 specifies the COSEM application layer in terms of structure, services and protocols for COSEM clients and servers, and defines how to use the COSEM application layer in various communication profiles. It defines services for establishing and releasing application associations, and data communication services for accessing the methods and attributes of COSEM interface objects, defined in IEC 62056-62, using either logical name (LN) or short name (SN) referencing. Annex A describes the xDLMS application service element. Annex B defines how to use the COSEM application layer in various communication profiles. Annex C includes encoding examples for APDUs. Annex D gives an explanation of the role of data models and protocols in electricity meter data exchange.

Electricity metering. Data exchange for meter reading, tariff and load control. COSEM application layer

DIN EN 62056-47:2007 电度表.电表读数、计价和负荷控制的数据交换.第47部分:IPv4网络用COSEM传输层

This part of IEC 62056 specifies the transport layers for COSEM communication profiles for use on IPv4 networks. These communication profiles contain a connection-less and a connection-oriented transport layer,providing OSI-style services to the service user COSEM application layer.The connection-less transport layer is based on the Internet standard Transmission Control Protocol. Although the major part of the COSEM transport layers is the UDP and TCP as they are specified in the relevant Internet standards,they include an additional sub-layer,called wrapper. Annex A shows how the OSI-style transport layer services can be converted to and from UDP and TCP function calls.

Electricity metering - Data exchange for meter reading, tariff and load control - Part 47: COSEM transport layers for IPv4 networks (IEC 62056-47:2006); German version EN 62056-47:2007, text in English

DIN EN 50470-2:2007 电计量设备(交流电).第2部分:特殊要求.有功电能用机电仪表(等级指数A和B)

Electricity metering equipment (a.c.) - Part 2: Particular requirements - Electromechanical meters for active energy (class indexes A and B); German version EN 50470-2:2006

DIN EN 50470-1:2007 电学计量设备(交流电).第1部分:一般要求、试验和试验条件.测量设备(等级指数A、B和C)

Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C); German version EN 50470-1:2006

DIN EN 50470-3:2007 电学计量设备(交流电).第3部分:特殊要求.有功能源用静态电度表(等级指数A、B和C)

Electricity metering equipment (a.c.) - Part 3: Particular requirements - Static meters for active energy (class indexes A, B and C); German version EN 50470-3:2006

BS EN 62056-62:2007 电度表.仪表读数.费率和负载控制的数据交换.接口等级

This part of IEC 62056 specifies a model of a meter as it is seen through its communication interface(s). Generic building blocks are defined using object-oriented methods, in the form of interface classes to model meters from simple up to very complex functionality.

Electricity metering - Data exchange for meter reading, tariff and load control - Interface classes

BS EN 62056-61:2007 电量测量.仪表读数、费率和负载控制的数据交换.目标识别系统(OBIS)

The OBject Identification System (OBIS) defines the identification codes (ID-codes) for commonly used data items in electricity metering equipment. This part of IEC 62056 specifies the overall structure of the identification system and the mapping of all data items to their identification codes. OBIS provides a unique identifier for all data within the metering equipment, including not only measurement values, but also abstract values used for configuration or obtaining information about the behaviour of the metering equipment. The ID codes defined in this standard are used for the identification of ? logical names of the various instances of the interface classes, or objects, as defined in IEC 62056-62; ? data transmitted through communication lines, see Clause A.1; ? data displayed on the metering equipment, see Clause A.2. This standard applies to all types of electricity metering equipment, such as fully integrated meters, modular meters, tariff attachments, data concentrators, etc. To cover metering equipment measuring energy types other than electricity, combined metering equipment measuring more than one type of energy or metering equipment with several physical measurement channels, the concepts of medium and channels are introduced. This allows meter data originating from different sources to be identified. While this standard fully defines the structure of the identification system for other media, the mapping of non-electrical energy related data items to ID codes needs to be completed separately. NOTE EN 13757-1 defines identifiers for metering equipment other than electricity: heat cost allocators, cooling, heating, gas, cold water and hot water.

Electricity metering - Data exchange for meter reading, tariff and load control - Object identification system (OBIS)

BS EN 62056-47:2007 量电计.电表读数、计费和负载控制的数据交换.IPv4网络用COSEM传输层

This part of IEC 62056 specifies the transport layers for COSEM communication profiles for use on IPv4 networks. These communication profiles contain a connection-less and a connection-oriented transport layer, providing OSI-style services to the service user COSEM application layer. The connection-less transport layer is based on the Internet standard User Datagram Protocol. The connection-oriented transport layer is based on the Internet standard Transmission Control Protocol. Although the major part of the COSEM transport layers is the UDP and TCP as they are specified in the relevant Internet standards, they include an additional sub-layer, called wrapper. Annex A shows how the OSI-style transport layer services can be converted to and from UDP and TCP function calls.

Electricity metering - Data exchange for meter reading, tariff and load control - COSEM transport layers for IPv4 networks

NF C44-470-3*NF EN 50470-3:2007 电学计量设备(交流电).第3部分:特殊要求.有效能量用静态电度表(等级指数A、B和C)

Electricity metering equipment (a.c.) - Part 3 : particular requirements - Static meters for active energy (class indexes A, B and C).

DIN EN 62059-41:2007 电量测量设备.可靠性.第41部分:可靠性预计(IEC 62059-41-2006)

Electricity metering equipment - Dependability - Part 41: Reliability prediction (IEC 62059-41:2006); German version EN 62059-41:2006

JB/T 10666-2006 电能表用脉冲计数器

本标准规定了电能表用脉冲计数器（以下简称计数器）的术语、分类、要求、试验方法、检验规则及产品的标志、包装和贮存。 本标准适用于静止式电能表、混合式多费率电能表所用的，由单相永磁步进电动机、拍合式继电器驱动的单排和（分别驱动的）多排字轮计数器。 本标准不适用于感应系电能表用计度器。 本标准不适用于电子数字显示计数器。 本标准不适用于其他类型的步进电动机计数器。

Pulse register for electricity meters

DB42/T 398-2006 电能计量控制柜

Electric energy metering and control cubicle

IEC 62056-46:2002/AMD1:2006 电量测量.电表读数、电费和负荷控制的数据交换.第46部分:使用高级数据链路控制(HDLC)协议的数据链路层

This standard is Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol; Amendment 1.

Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol; Amendment 1

IEC 62056-61:2006 电量测量.抄表、电费和负载控制的数据交换.第61部分:目标识别系统(OBIS)

The OBject Identification System (OBIS) defines the identification codes (ID-codes) for commonly used data items in electricity metering equipment. This part of IEC 62056 specifies the overall structure of the identification system and the mapping of all data items to their identification codes. OBIS provides a unique identifier for all data within the metering equipment, including not only measurement values, but also abstract values used for configuration or obtaining information about the behaviour of the metering equipment. The ID codes defined in this standard are used for the identification of ? logical names of the various instances of the interface classes, or objects, as defined in IEC 62056-62; ? data transmitted through communication lines, see Clause A.1; ? data displayed on the metering equipment, see Clause A.2. This standard applies to all types of electricity metering equipment, such as fully integrated meters, modular meters, tariff attachments, data concentrators, etc. To cover metering equipment measuring energy types other than electricity, combined metering equipment measuring more than one type of energy or metering equipment with several physical measurement channels, the concepts of medium and channels are introduced. This allows meter data originating from different sources to be identified. While this standard fully defines the structure of the identification system for other media, the mapping of non-electrical energy related data items to ID codes needs to be completed separately. NOTE EN 13757-1 defines identifiers for metering equipment other than electricity: heat cost allocators, cooling, heating, gas, cold water and hot water.

Electricity metering - Data exchange for meter reading, tariff and load control - Part 61: Object identification system (OBIS)

IEC 62056-62:2006 电量测量.抄表、电费和负荷控制的数据交换.第62部分:接口分类

This part of IEC 62056 specifies a model of a meter as it is seen through its communication interface(s). Generic building blocks are defined using object-oriented methods, in the form of interface classes to model meters from simple up to very complex functionality.

Electricity metering - Data exchange for meter reading, tariff and load control - Part 62: Interface classes