N22 电能测量和负荷控制系统 标准查询与下载

KS C IEC 62056-42:2005 电量测量.计数器读数、电费和负载控制的数据交换.第42部分:定向连接异步数据交换的物理层工作和程序

IEC 62056 규격은 비동기식 데이터 통신용 에너지 미터링(metering) 지침 명세

Electricity metering－Data exchange for meter reading, tariff and load control－Part 42：Physical layer services and procedures for connection-oriented asynchronous data exchange

KS C IEC 62053-23:2005 电量测量设备(交流电).特殊要求.第23部分:静止式交流无功电度表(2和3级)

이 규격(part)은 주파수 45∼65 Hz의 교류형 무효 전력을 계량하기 위해 새로이 제

Electricity metering equipments(a.c)－Particular requirements－Part 23：Static meters for reactive energy(classes 2 and 3)

KS C IEC 62056-62:2005 电量测量.抄表、电费和负荷控制的数据交换.第62部分:接口分类

이 IEC 62056 규격에는 통신 인터페이스(s)을 통해 바라본 미터 모델이 명시되어 있

Electricity metering-Data exchange for meter reading, tariff and load control-Part 62:Interface Classes

KS C IEC 62056-53:2005 电量测量.电表读数、种类计量和负载控制的数据交换.第53部分:能源计量用公共规范(COSEM)应用层

이 규격은 COSEM 클라이언트 및 서버를 위한 구조, 서비스, 프로토콜과 관련해서 COS

Electricity metering-Data exchange for meter reading, tariffand load control-Part 53:COSEM application layer

KS C IEC 62052-11:2005 交流电测量设备.通用要求、试验和试验条件.第11部分:测量设备

이 규격은 600 V까지의 전압과 함께 50 Hz 또는 60 Hz 네트워크 전력을 측정하기

Electricity metering equipments(a.c)－General requirements, tests and test conditions－Part 11：Metering equipment

KS C IEC 62056-31:2005 电量测量.抄表、电费和负荷控制的数据交换.第31部分:带有载波信令的双绞线局域网的使用

이 규격은 전기가 공급될 때 또는 공급되지 않을 때에 대하여 스테이션(station)과의

Electricity metering-Data exchange for meter reading, tariff and load control-Part 31:Use of local area networks on twisted pair with carrier signalling

KS C IEC 62056-41:2005 电表.读表、计费和负载控制数据交换.第41部分:使用广域网的数据交换:带LINK+协议的公共转换电话网(PSTN)

이 규격은 대형 산업 및 상업 고객의 계량 장비와의 통신(특히 요금 청구를 위해 이런 계량

Electricity metering-Data exchange for meter reading, tariff and load control-Part 41:Data exchange using wide area networks:Public switched telephone network(PSTN) with LINK+protocol

SANS 62051-1:2005 电量测量．用于电量计读数，传送和符合控制的数据交换．术语汇编．第1部分：使用DLMS/COSEM的电量测量装置的数据交换的相关术语

Reflects terms related to data exchange with metering equipment for meter reading and tariff and load control.

Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM

DIN EN 62054-21:2005 电量测量(交流).电费和负荷控制.第21部分:计时开关的特殊要求

Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches (IEC 62054-21:2004); German version EN 62054-21:2004

DIN EN 62054-11:2005 电量测量(交流).电费和负荷控制.第11部分:电子脉动控制接收器的特殊要求

Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers (IEC 62054-11:2004); German version EN 62054-11:2004

ANSI C12.7-2005 电度表插座要求

Covers the general requirements and pertinent dimensions applicable to watthour meter sockets rated up to and including 600 V and up to and including 320 A continuous duty per socket opening.

Requirements for Watthour Meter Sockets

BS DD 8431:2005 二次计量和辅助计量用电表.规格

This Draft for Development specifies requirements for newly manufactured electronic secondary meters of sub-meters which measure either electrecal energies alone or electrical energies together with other eclectrical parameters associated with the energy.It applies to meters that measure active energy,apparent energy, reactive energy(capactive,inductive and/or total), and ampere squared hours (A2h) and to the measurement of current,voltage, active power,apparent power,reactive power (capacitive,inductive and/or total), power factor,phase angle and frequency when measured in addition to an energy. It aoolies to all secondary and sub-meters for indoor and outdoor applications,both porthble and permanently installed, for all power frequencies including d.c. It also applies to all registers, indicators,displays and outputs,and to the operation of test outputs. It does not apply to primary meters,to data interfaces to the meters, or to load survey analysers of load survey meters.The reliability aspest is not covered in this draft.

Electrical static meters for secondary metering and sub-metering - Specification

BS EN 62052-21:2005 电量测量设备(交流).一般要求、试验和试验条件.收费和负载控制设备

Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Tariff and load control equipment

SANS 1799:2004 电度表．交流式电子计能表

Specifies requirements for newly manufactured static watt-hour meters of accuracy classes 1 and 2, for the measurement of a.c. electrical active energy of frequencies in the range 45 Hz to 65 Hz, and for their type tests.

Watt-hour meters - AC electronic meters for active energy

BS EN 62054-21:2004 电量测量设备(交流).税费和负荷控制.定时开关的特殊要求

This part of IEC 62054 specifies particular requirements for the type test of newly manufactured indoor time switches with operation reserve that are used to control electrical loads, multi-tariff registers and maximum demand devices of electricity metering equipment. The time switch keeps the real time, it may keep the date, it may be capable of handling leap years, it may support daylight saving, i.e. it modifies the deviation of local time to GMT according to the relevant regulations. The time switch may have a synchronization capability. The time switch also holds a schedule of switching actions, which may be specified in terms of time, day of the week, date within a month or a year. The time switch controls the output elements depending on the time and the schedule of switching actions stored. This standard gives no requirements for constructional details internal to the time switch. In the case where time switch functionality is integrated into multifunction electricity metering equipment, the relevant parts of this standard apply. This standard covers time switches with analogue mechanical dials or electronic digital displays that are - synchronous; or - crystal-controlled. This standard does not cover the acceptance tests and the conformity tests. Nevertheless, an example of what could be an acceptance test is given in Annex A . The dependability aspect is covered by the documents of the IEC 62059 series. When using this standard in conjunction with IEC 62052-21, the requirements of this standard take precedence over those of IEC 62052-21 with regard to any item already covered in it.

Electricity metering equipment (a.c.) - Tariff and load control - Particular requirements for time switches

BS EN 62054-11:2004 电量测量设备(交流).税费和负荷控制.电子脉动控制接收器的特殊要求

This part of IEC 62054 specifies particular requirements for the type test of newly manufactured indoor electronic ripple control receivers for the reception and interpretation of pulses of a single audio frequency superimposed on the voltage of the electricity distribution network and for the execution of the corresponding switching operations. In this system the mains frequency is generally used to synchronize the transmitter and receivers. Neither the control frequency nor the encoding are standardized in this standard. This standard gives no requirements for constructional details internal to the receiver. In the case where ripple control functionality is integrated in multifunction electricity metering equipment, the relevant parts of this standard apply. This standard does not cover the acceptance tests and the conformity tests. Nevertheless, an example of what could be an acceptance test is given in Annex D. The dependability aspect is covered by the documents of the IEC 62059 series. When using this standard in conjunction with IEC 62052-21, the requirements of this standard take precedence over those of IEC 62052-21 with regard to any item already covered in it.

Electricity metering equipment (a.c.) - Tariff and load control - Particular requirements for electronic ripple control receivers

ANSI C12.10-2004 机电式瓦特表

Covers the physical aspects of both detachable and bottom-connected watthour meters and associated registers. These include ratings, internal wiring arrangements, pertinent dimensions, markings, and other general specifications. Refer to the latest versi

Electromechanical Watthour Meters

IEC 62054-11:2004 电量测量(交流).税费和负载控制.第11部分:电子脉动控制接收器的特殊要求

Specifies particular requirements for the type test of newly manufactured indoor electronic ripple control receivers for the reception and interpretation of pulses of a single audio frequency superimposed on the voltage of the electricity distribution ne

Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers

IEC 62052-21:2004 电量测量设备(交流).一般要求、试验和试验条件.第21部分:资费和负荷控制设备

Specifies general requirements for the type test of newly manufactured indoor tariff and load control equipment, like electronic ripple control receivers and time switches that are used to control electrical loads, multi-tariff registers and maximum dema

Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment

IEC 62054-21:2004 交流测量 费率和负荷控制 第21部分:时间开关的特殊要求

GB／T 17215的本部分规定了最新制造的室内使用并具有工作储备的时间开关的型式试验特殊要 求。时间开关常用于电力负载控制、多费率寄读器和电能计量设备的最大需量装置。 时间开关保持实时，它可以保存日期，还能够处理闰年，它还支持夏令时，也就是说，根据相关规则， 它能修改当地时间和GMT的偏差。时间开关还具有同步功能，时间开关也保存开关动作程序表，该表 可以对时间周期、星期几、年或月的日期进行规定。时间开关根据时间和储存的程序表来控制输出 单元。 本部分对时间开关的内部结构不做要求。 当时间开关功能与多功能电能表功能结合起来时，本部分相关部分仍然适用。 本部分包括具有模拟机械标度盘或电子式数字显示器的时间开关。 ——同步时间开关； ——晶控时间开关。 本部分不包括接收试验和一致性试验，但是接收试验作为例子在附录A中给出。 可靠性方面的要求参照IEC 62059。 本部分与IEC 62052—21同时使用的时候，本部分条款优于IEC 62052—21。

Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches