N22 电能测量和负荷控制系统 标准查询与下载

KS C IEC 62053-11:2003 电量测量设备(交流电).特殊要求.第11部分:机电式有功电能表(0、5、1和2级)

이 규격은 주파수 45∼65 Hz까지의 교류형 유효 전력을 계량하기 위해 제작되는 계기

Electromechanical meters for active energy(Classes 0.5, 1 and 2)

KS C IEC 62053-21:2003 电量测量设备(交流电).特殊要求.第21部分:静止式交流有功电度表(1和2级)

이 규격은 주파수 45∼65 Hz까지의 교류형 유효 전력을 계량하기 위해 새로이 제조되는

Static meters for active energy(classes 1 and 2)

BS EN 62053-11:2003 电量计量设备(交流电).特殊要求.机电式电度表(0,5, 1和2级)

This part of IEC 62053 applies only to newly manufactured electromechanical watt-hour meters of accuracy classes 0,5, 1 and 2, for the measurement of alternating current electrical active energy in 50 Hz or 60 Hz networks and it applies to their type tests only. It applies only to electromechanical watt-hour meters for indoor and outdoor application consisting of a measuring element and register(s) enclosed together in a meter case. It also applies to operation indicator(s) and test output(s). If the meter has a measuring element for more than one type of energy (multi-energy meters), or when other functional elements, like maximum demand indicators, electronic tariff registers, time switches, ripple control receivers, data communication interfaces, etc. are enclosed in the meter case, then the relevant standards for these elements also apply. It does not apply to: - watt-hour meters where the voltage across the connection terminals exceeds 600 V (line-to-line voltage for meters for polyphase systems); - portable meters; - data interfaces to the register of the meter. Regarding acceptance tests, a basic guideline is given in IEC 60514. The dependability aspect is covered by the documents of the IEC 62059 series.

Electricity metering equipment (a.c.) - Particular requirements - Electromechanical meters for active energy (classes 0,5, 1 and 2)

BS EN 62053-21:2003 电量计量设备(交流电).特殊要求.静态电度表(1和2级)

This part of IEC 62053 applies only to newly manufactured static watt-hour meters of accuracy classes 1 and 2, for the measurement of alternating current electrical active energy in 50 Hz or 60 Hz networks and it applies to their type tests only. It applies only to static watt-hour meters for indoor and outdoor application consisting of a measuring element and register(s) enclosed together in a meter case. It also applies to operation indicator(s) and test output(s). If the meter has a measuring element for more than one type of energy (multi-energy meters), or when other functional elements, like maximum demand indicators, electronic tariff registers, time switches, ripple control receivers, data communication interfaces, etc. are enclosed in the meter case, then the relevant standards for these elements also apply. It does not apply to: - watt-hour meters where the voltage across the connection terminals exceeds 600 V (line-to-line voltage for meters for polyphase systems); - portable meters; - data interfaces to the register of the meter; - reference meters. Regarding acceptance tests, a basic guideline is given in IEC 61358. The dependability aspect is covered by the standards of the IEC 62059 series.

Electricity metering equipment (a.c.) - Particular requirements - Static meters for active energy (classes 1 and 2)

BS EN 62053-22:2003 电量计量设备(交流电).特殊要求.静态电度表(0.2S和0.5S级)

This part of IEC 62053 applies only to newly manufactured static watt-hour meters of accuracy classes 0,2 S and 0,5 S, for the measurement of alternating current electrical active energy in 50 Hz or 60 Hz networks and it applies to their type tests only. It applies only to transformer-operated static watt-hour meters for indoor application consisting of a measuring element and register(s) enclosed together in a meter case. It also applies to operation indicator(s) and test output(s). If the meter has a measuring element for more than one type of energy (multi-energy meters), or when other functional elements, like maximum demand indicators, electronic tariff registers, time switches, ripple control receivers, data communication interfaces, etc. are enclosed in the meter case, then the relevant standards for these elements also apply. NOTE IEC 60044-1 describes transformers having a measuring range of 0,01 ln to 1,2 ln, or of 0,05 ln to 1,5 ln, or of 0,05 ln to 2 ln and transformers having a measuring range of 0,01 ln to 1,2 ln for accuracy classes 0,2 S and 0,5 S. As the measuring ranges of a meter and its associated transformers have to be matched and as only transformers of classes 0,2 S and 0,5 S have the accuracy required to operate the meters of this standard, the measuring range of the meter will be 0,01 ln to 1,2 ln. It does not apply to: - watt-hour meters where the voltage across the connection terminals exceeds 600 V (line-to-line voltage for meters for polyphase systems); - portable meters and meters for outdoor use; - data interfaces to the register of the meter; - reference meters. The dependability aspect is covered by the documents of the IEC 62059 series.

Electricity metering equipment (a.c.) - Particular requirements - Static meters for active energy (classes 0,2 S and 0,5 S)

NF C44-056-21*NF EN 62056-21:2003 电量测量.电表读数、电费和负载控制的数据交换.第21部分:直接地方数据交换

Electricity metering - Data exchange for meter reading, tariff and load control - Part 21 : direct local data exchange.

IEC 62052-11:2003 交流电测量设备 通用要求、试验和试验条件 第11部分:测量设备

This part of IEC 62052 covers type tests for electricity metering equipment for indoor and outdoor application and applies to newly manufactured equipment designed to measure the electrical energy on 50 Hz or 60 Hz networks, with a voltage up to 600 V. It applies to electromechanical or static meters for indoor and outdoor application consisting of a measuring element and register(s) enclosed together in a meter case. It also applies to operation indicator(s) and test output(s). If the meter has a measuring element for more than one type of energy (multi-energy meters), or when other functional elements, such as maximum demand indicators, electronic tariff registers, time switches, ripple control receivers, data communication interfaces, etc. are enclosed in the meter case, then the relevant standards for these elements apply. It does not apply to: a) portable meters; b) data interfaces to the register of the meter; c) reference meters. For rack-mounted meters, the mechanical properties are not covered in this standard.

Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment

IEC 62053-11:2003 电量测量设备(交流电).特殊要求.第11部分:机电电度表(0,5, 1和2级)

Applies only to newly manufactured electromechanical watt-hour meters of accuracy classes 0,5, 1 and 2, for the measurement of alternating current electrical active energy in 50 Hz or 60 Hz networks and it applies to their type tests only. It applies onl

Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)

DIN EN 62056-42:2003 电量测量.计器读数、电费和负载控制的数据交换.第42部分:定向连接异步数据交换程序和物理层服务 (IEC 62056-42:2002); 德文版本 EN 62056-42:2002、英文文本

This standard specifies the physical layer services and protocols with the Companion Specification for Energy Metering (COSEM) three-layer connection oriented profile for asynchronous data communication. The document does not specify physical layer signals and mechanical aspects. Local, implementation-specific issues are also not specified.#,,#

Electricity metering - Data exchange for meter reading, tariff and load control - Part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange (IEC 62056-42:2002); German version EN 62056-42:2002, text in English

DIN EN 62056-21:2003 电量测量.计器读数、电费和负载控制的数据交换.第21部分:局域数据直接交换 (IEC 62056-21:2002); 德文版本 EN 62056-21:2002、英文文本

This standard describes hardware and protocol specifiations for local meter data exchange. In such systems, a hand-held unit (HHU) or a unit with equivalent functions is connected to a tariff device or a group of devices.#,,#

Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange (IEC 62056-21:2002); German version EN 62056-21:2002, text in English

IEC 62053-23:2003 电量测量设备(交流电).特殊要求.第22部分:静态乏时计(2和3级)

Applies only to newly manufactured static var-hour meters of accuracy classes 2 and 3, for the measurement of alternating current electrical reactive energy in 50 Hz or 60 Hz networks and it applies to their type tests only. For practical reasons, this s

Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)

IEC 62053-22:2003 电量测量设备(交流电).特殊要求.第22部分:静态电度表(0.2S和0.5S级)

Applies only to newly manufactured static watt-hour meters of accuracy classes 0,2 S and 0,5 S, for the measurement of alternating current electrical active energy in 50 Hz or 60 Hz networks and it applies to their type tests only.

Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)

IEC 62053-21:2003 电量测量设备(交流电).特殊要求.第21部分:静态电度表(1和2级)

Applies only to newly manufactured static watt-hour meters of accuracy classes 1 and 2, for the measurement of alternating current electrical active energy in 50 Hz or 60 Hz networks and it applies to their type tests only. It applies only to static watt

Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)

JB/T 5467.1-2002 机电式交流有功和无功电能表.第1部分:通用要求

本部分规定了机电式交流有功和无功电能表的分类、要求、试验方法、检验》朋0、标志、包装及贮存等。 本部分适用于固定安装使用的、测量参比频率为50Hz的交流电能的机电式有功和无功电能表。 本部分仅适用于户内和户外使用的，测量机构和计度器包封在一个表壳内的电能表及其与附件的组合(包括内附电流互感器)。 本部分也适用于工作指示器和测试输出。 如果电能表的测量机构用于测量一种型式以上的电能(多电能电能表)，或者当其他功能部件，如最大需量指示器、电子多费率计数器、时间开关、纹波控制器、数据通信接口等包封在该表壳内，则还应遵照与这些部件相应的标准。 本部分不适用于： a) 可携式电能表： b) 接线端子之间电压(三相系统中电能表线间电压)超过600V的电能表： c) 电能表的计度器数据接口。

Electromechanical meters for active energy and reactive energy Part1:General requirements

JB/T 5467.2-2002 机电式交流有功和无功电能表.第2部分:长寿命电能表的特殊要求

本部分规定了机电式交流有功和无功长寿命电能表的分类、要求、试验方法、检验规则、包装及贮存等。 本部分仅适用于固定安装使用的、测量参比频率为50Hz、准确度等级为2级的交流有功电能的机电式交流有功和无功长寿命电能表。 本部分也适用于带有其他附加功能的，如脉冲、复费率、预付费等电能表的基表。增加的功能要求应符合相应标准的要求。

Electromechanical meters for active energy and reactive energy Part2:Particular requirements for long life meter

JB/T 50070-2002 电能表可靠性要求及考核方法

本标准规定了电能表的可靠性要求及考核方法。

Reliability requirements and reliability compliance test for electrical energy meters

JB/T 5465.2-2002 电能表用零部件.磁力轴承组件

本部分规定了电能表用磁力轴承组件的定义、分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本部分适用于由永磁材料构成的单相和三相有功、无功电能表用的磁推轴承组件和磁悬吊轴承组件。

Magnetic bearing assembly for energy meters

DL/T 830-2002 静止式单相交流有功电能表使用导则

Technical requirements for stocking single phase alternating current static watt-hour meter

DL/T 828-2002 单相交流感应式长寿命技术电能表使用导则

Technical requirements for stocking single phase alternating current long life induction watt-hour meter

DL/T 829-2002 单相交流感应式有功电能表使用导则

本标准规定了单相交流有功电能表的机械和结构要求及技术要求，试验、检验要求等。 本标准适用于测量参比频率为 50Hz (或 60Hz) 交流电能的安装式 2.0 级单相感应式电能表 (以下 简称为电能表) 的制造、使用、订货和验收。

Technical requirements for stocking single phase alternating current induction watt-hour meter