共找到 463 条与 电能测量和负荷控制系统 相关的标准,共 31 页
Electricity metering data exchange. The DLMS/COSEM suite. COSEM interface classes
This part of IEC 62054 specifies particular requirements for the type test of newly manufactured indoor time switches with operation reserve that are used to control electrical loads, multi-tariff registers and maximum demand devices of electricity metering equipment. The time switch keeps the real time, it may keep the date, it may be capable of handling leap years, it may support daylight saving, i.e. it modifies the deviation of local time to GMT according to the relevant regulations. The time switch may have a synchronization capability. The time switch also holds a schedule of switching actions, which may be specified in terms of time, day of the week, date within a month or a year. The time switch controls the output elements depending on the time and the schedule of switching actions stored. This standard gives no requirements for constructional details internal to the time switch. In the case where time switch functionality is integrated into multifunction electricity metering equipment, the relevant parts of this standard apply. This standard covers time switches with analogue mechanical dials or electronic digital displays that are synchronous; or; crystal-controlled. This standard does not cover the acceptance tests and the conformity tests. Nevertheless, an example of what could be an acceptance test is given in Annex A . The dependability aspect is covered by the documents of the IEC 62059 series. The safety aspect is covered by IEC 62052-31:2015. When using this standard in conjunction with IEC 62052-21, the requirements of this standard take precedence over those of IEC 62052-21 with regard to any item already covered in it.
Electricity metering (AC) - Tariff and load control - Part 21: Particular requirements for time switches
This International Standard describes how DLMS/COSEM Application layer and object model as specified in IEC 62056-5-3, IEC 62056-6-1 and IEC 62056-6-2 can make use of lower layers as specified in IEC 14908 series, forming a DLMS/COSEM over ISO/IEC14908 communication profile.
Electricity metering data exchange - The DLMS/COSEM suite - Part 8-8: Communication profile for ISO/IEC 14908 series networks (IEC 13/1743/CD:2017)
Electricity metering data exchange. The DLMS/COSEM suite. Object Identification System (OBIS)
Electricity metering data exchange. The DLMS/COSEM suite. Mesh communication profile for neighbourhood networks
At the end of the clause, add the following: The safety aspect is covered by IEC 62052-31:2015.
Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1); Amendment 1
After the dashed items list, add the following: The safety aspect is covered by IEC 62052-31:2015. Replace the penultimate paragraph by the following: Regarding acceptance tests, see IEC 62058-11:2008 and IEC 62058-31:2008.
Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2); Amendment 1
Add the following after the fourth paragraph: The safety aspect is covered by IEC 62052-31:2015.
Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment; Amendment 1
At the end of the clause, add the following: The safety aspect is covered by IEC 62052-31:2015.
Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment; Amendment 1
At the end of the clause, add the following: The safety aspect is covered by IEC 62052-31:2015. Regarding acceptance tests, see IEC 62058-11:2008 and IEC 62058-31:2008.
Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S); Amendment 1
After the dashed items list, add the following: The safety aspect is covered by IEC 62052-31:2015. Replace the penultimate paragraph by: Regarding acceptance tests, see IEC 62058-11:2008 and IEC 62058-21:2008.
Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2); Amendment 1
At the end of the clause, add the following: The safety aspect is covered by IEC 62052-31:2015.
Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3); Amendment 1
Meter data communication - IP-Telemetry
Add, as the penultimate paragraph, the following: The safety aspect is covered by IEC 62052-31:2015.
Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers; Amendment 1
Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1)
Electric Energy Information Collection and Management System Part 4-4: Communication Protocol—Micropower Wireless Communication Protocol
Electric energy information collection and management system part 4-6: communication protocol - collection terminal remote communication module interface protocol
Reliability Verification Method of Electric Energy Information Collection Terminal
本标准规定了电能信息采集终端检测装置的技术条件,包括检测装置的构成、技术要求、试验方法和试验结果处理。 本标准适用于电能信息采集终端检测装置的检验、验收和使用。
Technical specification of electrical energy data acquisition terminal test equipment
Electric Energy Information Collection and Management System Part 5-1: Test Specifications—Functional Test
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号