N31 望远镜、大地测量与航测仪器 标准查询与下载

ISO 14490-6:2014 光学和光子学. 望远镜系统的试验方法. 第6部分: 纱幕眩光指数的试验方法

This part of ISO 14490 specifies the test methods for the determination of the veiling glare index of telescopic systems and observational telescopic instruments.

Optics and photonics - Test methods for telescopic systems - Part 6: Test methods for veiling glare index

ISO 14135-2:2014 光学和光子学. 瞄准镜的规格. 第2部分: 高性能仪器

This part of ISO 14135 applies to high-performance telescopic sights, used on hand-held firearms and airguns. It contains a classification of the usage of telescopic sights and specifies interfaces, minimum requirements, and tolerances to their performances. General-purpose telescopic sights are specified in ISO 14135-1.

Optics and photonics - Specifications for telescopic sights - Part 2: High-performance instruments

ISO 14135-1:2014 光学和光子学. 瞄准镜的规格. 第1部分: 通用仪器

This part of ISO 14135 applies to general-purpose telescopic sights, used on hand-held firearms and airguns. It contains a classification to the usage of telescopic sights and specifies interfaces minimum redquirements, and tolerances to their performances. High-performance telescopic Sights are specified in ISO 14135-2.

Optics and photonics - Specifications for telescopic sights - Part 1: General-purpose instruments

BS ISO 14135-1:2014 光学和光子学. 瞄准镜的规格. 通用仪器

Optics and photonics. Specifications for telescopic sights. General-purpose instruments

BS ISO 14135-2:2014 光学和光子学. 瞄准镜的规格. 高性能仪器

Optics and photonics. Specifications for telescopic sights. High-performance instruments

JIS B 7121 AMD 1:2013 光学和光学仪器.双筒望远镜,单筒望远镜和望远镜规格(修改件1)

Optics and optical instruments.Specifications for binoculars, monoculars and spotting scopes(Amendment 1)

ISO 17123-5:2012 光学和光学仪器.大地测量和测绘仪器的现场试验规程.第5部分:电子视距仪

This part of ISO 17123 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of coordinate measurement of total stations and their ancillary equipment when used in building and surveying measurements. Primarily, these tests are intended to be field verifications of the suitability of a particular instrument for the immediate task at hand and to satisfy the requirements of other standards. They are not proposed as tests for acceptance or performance evaluations that are more comprehensive in nature. These field procedures have been developed specifically for in situ applications without the need for special ancillary equipment and are purposely designed to minimize atmospheric influences.

Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 5: Total stations

DIN EN 16031:2012 望远镜可调节铝支柱.产品规格,设计,计算评估和试验.德文版本EN 16031-2012

Adjustable telescopic aluminum props - Product specifications, design and assessment by calculation and tests; German version EN 16031:2012

JJF 1350-2012 陀螺经纬仪校准规范

本规范适用于陀螺经纬仪的校准。

Calibration Specification for Gyrotheodolites

JJF 1349-2012 工具经纬仪校准规范

本规范适用于工具经纬仪的校准。

Calibration Specification for Tool Theodolites

ISO 17123-6:2012 光学和光学仪器.大地测量和测绘仪器的现场试验规程.第6部分:旋转激光器

This part of ISO 17123 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of rotating lasers and their ancillary equipment when used in building and surveying measurements for levelling tasks. Primarily, these tests are intended to be field verifications of the suitability of a particular instrument for the immediate task at hand and to satisfy the requirements of other standards. They are not proposed as tests for acceptance or performance evaluations that are more comprehensive in nature. This part of ISO 17123 can be thought of as one of the first steps in the process of evaluating the uncertainty of a measurement (more specifically a measurand). The uncertainty of a result of a measurement is dependent on a number of parameters. Therefore this part of ISO 17123 differentiates between different measures of accuracy and objectives in testing, like repeatability and reproducibility (between-day repeatability), and of course gives a thorough assessment of all possible error sources, as prescribed by ISO/IEC Guide 98-3 and ISO 17123-1. These field procedures have been developed specifically for in situ applications without the need for special ancillary equipment and are purposefully designed to minimize atmospheric influences.

Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 6: Rotating lasers

ISO 14490-8:2011 光学和光学仪器.望远镜系统的试验方法.第8部分:夜视设备的试验方法

This International Standard describes the test methods fordetermining the performance of night-vision devices as specified in ISO 21094.

Optics and optical instruments - Test methods for telescopic systems - Part 8: Test methods for night-vision devices

JJF 1302-2011 光学经纬仪型式评价大纲

本大纲适用于DJ、DJ、DJ、DJ光学经纬仪的型式评价。

Program of Pattern Evaluation for Optical Theodolites

ASTM F1863-10 测量透明部件的夜视镜.加权传导性的标准试验方法

Significance8212;This test method provides a means to measure the compatibility of a given transparency through which NVGs are used at night to view outside, nighttime ambient illuminated natural scenes. Use8212;This test method may be used on any transparent part, including sample coupons. It is primarily intended for use on large, curved, or thick parts that may already be installed (for example, windscreens on aircraft).1.1 This test method covers apparatuses and procedures that are suitable for measuring the NVG-weighted transmissivity of transparent parts including those that are large, thick, curved, or already installed. This test method is sensitive to transparencies that vary in transmissivity as a function of wavelength. 1.2 Since the transmissivity (or transmission coefficient) is a ratio of two radiance values, it has no units. The units of radiance recorded in the intermediate steps of this test method are not critical; any recognized units of radiance (for example, watts/m2-str) may be used, as long as it is consistent. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts

ISO 14132-5:2008 光学和光子学.远视设备词汇.第5部分:夜视装置术语

This part of ISO14132 gives terms and definitions for night vision devices such as binoculars, monoculars and goggles that are used for observation activities at night, rescue actions under Iow light conditions, urgent repairs in the dark, night-time surveillance, and research in the near infrared or ultraviolet regions. This part of ISO 14132 does not cover thermal imaging technol-ogy. The definitions may be changed, if required, by introducing derivative attributes into them, revealing the meanings of the terms used, showing the objects covered by the scope of the notion being defined. These changes shall not upset the scope and contents of the notions defined. NOTE In addition to terms used in the three official ISO languages (English, French and Russian), this part of ISO 14132 gives the equivalent terms and definitions in the German language; these are published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.

Optics and photonics - Vocabulary for telescopic systems - Part 5: Terms for night vision devices

BS ISO 21094:2008 光学和光子学.远视设备.夜视装置用规范

Optics and photonics - Telescopic systems - Specifications for night vision devices

DL/T 1086-2008 光电式（CCD）静力水准仪

本标准规定了光电式（CCD）静力水准仪（以下简称DDC静力水准仪）的产品规格、技术要求、试验方法、检验规则和标志、包装、运输、储存。 本标准适用于大坝及其他岩土工程安全监测中应用连通管法（即流体静力水准法）测量垂直位移的CCD静力水准仪的设计、生产、试验、使用、维护及仲裁检验。

Photoelectric type(CCD) hydrostatic level

JIS B 7121:2007 光学和光学仪器.双筒望远镜、单筒望远镜和定位观测望远镜的规范

この規格は，双眼鏡，単眼鏡及びスポッティングスコープについて規定する。

Optics and optical instruments -- Specifications for binoculars, monoculars and spotting scopes

JIS B 7263-4:2007 光学和光学仪器.望远系统的试验方法.第4部分:天文望远镜的试验方法

この規格は，アマチュア向けの天体望遠鏡の試験方法について規定する。なお，望遠鏡の基本特性の試験方法については，JIS B 7267-1による。

Optics and optical instruments -- Test methods for telescopic systems -- Part 4: Test methods for astronomical telescopes

JIS B 7263-1:2007 光学和光学仪器.望远系统的试验方法.第1部分:基本特性的试验方法

この規格は，望遠鏡系及び望遠観察機器の基本特性の試験方法について規定する。

Optics and optical instruments -- Test methods for telescopic systems -- Part 1: Test methods for basic characteristics