N35 光学测试仪器 标准查询与下载

JJG 414-2003 光学经纬仪

Optical Theodolites

KS B 5570-2002 UV/Vis分光光度计性能测验

이 규격은 자외선 영역과 가시 광선 영역의 분광 기술에 의해 물질에 따른 파장별 스펙트럼을

Performance test for UV/Vis spectrophotometer

ASTM E809-02 测量反光境的光度特性的标准实施规程

This practice describes procedures used to measure photometric quantities that relate to the visual perception of retroreflected light. The most significant usage is in the relation to the nighttime vehicle headlamp, retroreflector, and driverrsquo;eye geometry. For this reason the CIE Standard Source A is used to represent a tungsten vehicle headlamp and the receptor has the photopic, V (λ), spectral responsivity corresponding to the light adapted human eye. Although the geometry must be specified by the user, it will, in general, correspond to the relation between the vehicle headlamp, the retroreflector, and the vehicle driverrsquo;eye position. 1.1 This practice describes the general procedures for instrumental measurement of the photometric characteristics of retroreflective materials and retroreflective devices.1.2 This practice is a comprehensive guide to the photometry of retroreflectors but does not include geometric terms that are described in Practice E 808.1.3 This practice describes the parameters that are required when stating photometric measurements in specific tests and specifications for retroreflectors.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Measuring Photometric Characteristics of Retroreflectors

KS B 5608-2001 目镜千分尺目镜

이 규격은 현미경용 마이크로 접안 렌즈(1)[이하 마이크로 접안 렌즈라 한다(그림 1 참조

Filar micrometer eyepieces

KS B 5609-2001 轮廓测定投影器

이 규격은 길이, 각도, 윤곽 등을 측정하는 측정 투영기에 대하여 규정한다. 측정 투영기는

Profile projectors

KS B 5619-1999 显微镜的目镜标线片

이 규격은 현미경에 사용하는 접안 렌즈 초점판(이하 초점판이라고 한다.)에 대하여 규정한다

Microscopes-Eyepiece reticles

JB/T 9459-1999 暗筒式日照计 技术条件

　　本标准规定了暗筒式日照计的技术要求、试验方法、检验规则、标志、包装、运输和贮存等内容。 　　本标准适用于暗筒式日照计产品。

Specifications for the jordan sunshine recorder

ISO 12005:1999 激光和激光设备 激光束参数的试验方法 偏振

Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization

ISO 11990:1999 光学和光学仪器 激光和激光设备 导管激光抗性的测定

Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts

KS B 5614-1998 实体显微镜

이 규격은 좌우의 독립된 결상 광학계를 가지며, 입체 시관찰이 가능한 쌍안 실체 현미경에

Stereo microscopes

ARMY MIL-T-49124 NOTICE 1-1997 TS-3620()型激光测距机的测试设置

This notice should be filed in front of MIL-T49124(CR),dated 23 May 1977.

TEST SET, LASER RANGEFINDER, TS-3620( )

KS B 5615-1997 生物显微镜物镜

이 규격은 두께 0.17mm의 덮개 유리를 사용한 표본을 사용하는 생물 현미경에 사용하는

Biological microscope objectives

KS B 5606-1997 伽利略望远镜

이 규격은 접안 렌즈에 오목 렌즈계를 사용하고, 대물 렌즈에는 2매 이상으로 구성된 렌즈를

Galilean binoculars

KS B 5607-1997 棱镜望远镜

이 규격은 정립 광학계로서 프리즘을 사용하는 쌍안경에 대하여 규정한다.

Prism binoculars

ASTM E1897-97(2002)e1 用红外成像辐射仪测量和均衡衰减介质的传输性的标准试验方法

The transmittance of an attenuating medium can cause errors for an infrared thermographer using an infrared imaging radiometer to measure the temperature of a specimen through the medium. Three test methods are given for measuring and compensating for this error source. 5.1.1 A test method is given for measuring the transmittance of an attenuating medium. 5.1.2 A test method is given for compensating for errors when measuring the temperature of a specimen having a known emissivity through an attenuating medium with a known transmittance. 5.1.3 A test method is given for measuring and compensating for transmittance and emissivity errors when the specimen temperature is known. These test methods can be used in the field or laboratory using commonly available materials. These test methods can be used with any infrared radiometers that have the required computer capabilities.1.1 These test methods cover procedures for measuring and compensating for transmittance when using an infrared imaging radiometer to measure the temperature of a specimen through an attenuating medium, such as a window, filter or atmosphere.1.2 The values stated in SI units are to be regarded as the standard.1.3 These test methods may involve use of equipment and materials in the presence of heated or electrically-energized equipment, or both. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers

ASTM E1897-97 用红外成像辐射仪测量和均衡衰减介质的传输性的标准试验方法

1.1 These test methods cover procedures for measuring and compensating for transmittance when using an infrared imaging radiometer to measure the temperature of a specimen through an attenuating medium, such as a window, filter or atmosphere. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 These test methods may involve use of equipment and materials in the presence of heated or electrically-energized equipment, or both. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers

JIS B 7183:1995 检镜仪

この規格は，眼鏡(めがね)レンズ及びハードコンタクトレンズの光学的性能を測定するアナログ式及びディジタル表示式のレンズメータについて規定する。

Lens-meters

KS B 5601-1995 测微显微镜

이 규격은 눈금량 1마이크로 미터,측정 범위 1MM의 측미 현미경에 대하여 규정한다.

Micrometer microscopes

KS B 5602-1995 工具显微镜

이 규격은 관측 현미경과 정밀 십자 이동 테이블로 길이, 각도, 윤곽등을 측정하는 공구 현

Toolmakers’ microscopes

ASTM E816-95(2002) 野外用次级标准日射强度计及日射强度计的校准方法

1.1 This test method has been harmonized with, and is technically equivalent to, ISO 9059.1.2 Two types of calibrations are covered by this test method. One is the calibration of a secondary reference pyrheliometer using an absolute cavity pyrheliometer as the primary standard pyrheliometer, and the other is the transfer of calibration from a secondary reference to one or more field pyrheliometers. This test method proscribes the calibration procedures and the calibration hierarchy, or traceability, for transfer of the calibrations. Note 18212;It is not uncommon, and is indeed desirable, for both the reference and field pyrheliometers to be of the same manufacturer and model designation.1.3 This test method is relevant primarily for the calibration of reference pyrheliometers with field angles of 5 to 6176;, using as the primary reference instrument a self-calibrating absolute cavity pyrheliometer having field angles of about 5176;. Pyrheliometers with field angles greater than 6.5176; shall not be designated as reference pyrheliometers.1.4 When this test method is used to transfer calibration to field pyrheliometers having field angles both less than 5176; or greater than 6.5176;, it will be necessary to employ the procedure defined by Angstrom and Rodhe.1.5 This test method requires that the spectral response of the absolute cavity chosen as the primary standard pyrheliometer be nonselective over the range from 0.3 to 10-956;m wavelength. Both reference and field pyrheliometers covered by this test method shall be nonselective over a range from 0.3 to 4-956;m wavelength.1.6 The primary and secondary reference pyrheliometers shall not be field instruments and their exposure to sunlight shall be limited to calibration or intercomparisons. These reference instruments shall be stored in an isolated cabinet or room equipped with standard laboratory temperature and humidity control.Note 28212;At a laboratory where calibrations are performed regularly, it is advisable to maintain a group of two or three secondary reference pyrheliometers that are included in every calibration. These serve as controls to detect any instability or irregularity in the standard reference pyrheliometer.1.7 This test method is applicable to calibration procedures using natural sunshine only.

Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers