N70 试验机与无损探伤仪器综合 标准查询与下载

NF M62-301-4*NF ISO 11933-4:2001 密封罩用组件.第4部分:通风和气体清洁系统(如:过滤器和疏水阀)的安全和调节阀门以及控制和保护装置

Components for containment enclosures - Part 4 : ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices.

KS B 5524-2001 布氏硬度试验机

이 규격은 KS B 0805에 의한 브리넬 경도를 측정하는 시험기(이하 시험기라 한다.)

Brinell hardness testing machines

NF M62-302:2000 辐射防护.X和γ射线辐射的个人剂量处理器的定期评价准则和性能限值

Radiation protection - Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation.

DIN EN ISO 3452-4:1999 无损检验.渗透检验.第4部分:设备

This document defines the characteristics of equipment used in penetrant testing.

Non-destructive testing - Penetrant testing - Part 4: Equipment (ISO 3452-4:1998); German version EN ISO 3452-4:1998

ASTM E545-99 测定直接热中子射线照相检验中成像质量的标准试验方法

1.1 This method covers the use of an Image Quality Indicator system to determine the relative quality of radiographic images produced by direct, thermal neutron radiographic examination. The requirements expressed in this method are not intended to control the quality level of materials and components. 1.2 This standard does not purport to address the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination

ANSI/ASTM E6:1999 机械试验方法术语

This terminology covers the principal terms relating to methods of mechanical testing of solids. The general definitions are restricted and interpreted, when necessary, to make them particularly applicable and practicable for use in standards requiring or relating to mechanical tests. These definitions are published to encourage uniformity of terminology in product specifications. Terms relating to fatigue and fracture testing are defined in Terminology E 1823.

Terminology Relating to Methods of Mechanical Testing

NF M62-104:1998 核能 辐射屏蔽 用于屏蔽外壳混凝土墙的伽马辐射屏蔽窗

Énergie nucléaire - Protection contre les rayonnements - Fenêtres de protection contre les rayonnements gamma pour parois en béton des enceintes blindées.

KS B 5543-1997 平衡机

이 규격은 강성 로터를 지지하고 임의의 측정면에 있어서 불균형의 크기 및 불균형 각도를 지

Balancing Machines

JIS B 7728:1997 验证单轴试验机用力检验仪器的校正

Calibration of force-proving instruments used for the verification of uniaxial testing machines

DIN 54180-2:1997 无损检测.剪切图解.第2部分:设备

The document defines the general technical characteristics of equipment which is used for shearographic testing.

Non-destructive testing - Shearography - Part 2: Equipment

DIN 54180-1:1997 无损检测.剪切图解.第1部分:一般原理

The document determines general principles of the shearographic testing and defines basic terms.

Non-destructive testing - Shearography - Part 1: General principles

WJ 2418-1997 炮用正弦机检定规程

Calibration rules for gun sine machine

ASTM F1678-96 使用便携式铰链支杆滑动测试仪(PAST)的测试方法

1.1 This test method covers the operational procedures for using a portable articulated strut slip tester (PAST) for determining the slip resistance of footwear sole, heel, or related materials (test feet) against planar walkway surfaces or walkway surrogates (test surfaces) in either the laboratory or field under dry conditions. This test method does not address all methodological issues (for example, test surface and test foot material selection and preparation, experimental design, or report preparation). 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Using a Portable Articulated Strut Slip Tester (PAST)

ASTM F1677-96 使用便携式可倾斜铰链支杆滑动测试仪(PIAST)的标准试验方法

1.1 This test method covers the operational procedures for using a portable inclinable articulated strut slip tester (PIAST) for determining the slip resistance of footwear sole, heel, or related materials (test feet) against planar walkway surfaces or walkway surrogates (test surfaces) in either the laboratory or field under dry, wet, or contaminated conditions. This test method does not address all methodological issues (for example, test surface and test foot material selection and preparation, experimental design, or report preparation). 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)

KS B 5529-1995 艾氏冲杯试验机

이 규격은 금속 박판의 에릭슨 값을 측정하는 시험기에 대하여 규정한다.

Erichsen cupping testers

JB 7788-1995 500kV以下工业X射线探伤机 防护规则

本标准规定了工业X射线探伤机防护要求、X射线机结构防护要求、漏射线照射量率的测试、检验规则、防护规则。 本标准适用于500kV以下X射线机的生产和使用。

Protection rules for industrial X-ray flaw detectors below 500kV

JIS B 7729:1995 埃氏冲盂试验机

Erichsen cupping testers

WJ 2294-1995 火药和炸药爆发点测试装置检定规程

Verification rules for explosive and explosive flashpoint testing devices

JB/T 7406.1-1994 试验机术语.材料试验机

本标准规定了材料试验的基本概念、材料试验机及力、变形检测仪名称、零部件、元件以及性能参数等方面的术语和定义。 本标准适用于材料试验机标准制订、技术文件编制、教材和书刊编写以及文献翻译等。 注：本标准方括号[]内的字，是在不致混淆的情况下，可省略的词：圆括号（）内的字，除作说明外，为前者的同义词。

Testing machine terminology - Material testing machine

JB/T 7406.2-1994 试验机术语.无损检测仪器

本标准规定了无损检测仪器的基本概念、产品名称、性能参数、零部件、附件和材料、试验方法等方面的术语和定义。 本标准适用于无损检测仪器的标准制订、技术文件编制、教材和书刊编写以及文献翻译等。 注：本标准方括号[]内的字，是在不致混淆情况下，可省略的词，圆括号（）内的词，除作说明外，为前者的同义词。

Testing machine terminology - Non-destructive test instrument