N95 气象仪器 标准查询与下载

GJB 6297-2008 边界层风廓线仪通用规范

本规范规定了边界层风廓线仪的通用要求、质量保证规定和交货准备等。 本规范适用于边界层风廓线仪（以下简称“风廓线仪”）的研制、生产和产品验收。

General specification for boundary layer wind profiler

GJB 6075-2007 对流层风廓线仪通用规范

本规范规定了军用对流层风廓线仪的通用要求、质量保证规定和交货准备等。 本规范适用于军用对流层风廓线仪（以下简称风廓线仪）的研制、生产和产品验收。

General specigcation for troposphere wind profiler

BS ISO 17714:2007 气象学.空气温度测量.温度计护罩/荧光屏性能比较和定义重要特征的试验方法

This International Standard defines characteristics of a thermometer shield/screen. It also defines test methods to inter-compare the behaviour of different screen designs. Although screens are usually used for both air temperature and humidity measurements, this International Standard is applicable only to temperature measurements. Both naturally and artificially ventilated screens are considered.

Meteorology. Air temperature measurements. Test methods for comparing the performance of thermometer shields/screens and defining important characteristics

BS ISO 17713-1:2007 气象学.风速测量计.测定旋转式风速计性能的风洞试验方法

This part of ISO 17713 describes wind tunnel test methods for determining performance characteristics of rotating anemometers, specifically cup anemometers and propeller anemometers.This part of ISO 17713 describes an acceptance test and unambiguous methods for measuring the starting threshold, distance constant, transfer function and off-axis response of a rotating anemometer in a wind tunnel.

Meteorology. Wind measurements. Wind tunnel test methods for rotating anemometer performance

BS 7843-3.2:2005 气象降水数据的获取和管理指南.雨量计的规范.倾杯式雨量计

This British Standard specifies the minimum performance requirements for any ground mounted tipping bucket raingauge (TBR). It does not specify any physical shape or dimension unless these are necessary to meet the performance requirements. NOTE Recent R & D suggest that aerodynamically shaped gauges achieve a catch more similar to check gauges than do cylinder shaped gauges.

Guide to the acquisition and management of meteorological precipitation data - Specifcation for raingauges - Tipping bucket gauges

QX/T 19-2003 净全辐射表

本标准规定了工作级热电式净全辐射表(以下简称净全辐射表)的组成、技术要求、试验方法、检验规则、标志、包装、运输、贮存和成套性等。 本标准适用于气象、农业、工业、国防、科研等部门测定净全辐射的仪器。

Net pyrradiometer

QX/T 20-2003 直接辐射表

本标准规定了工作级热电式直接辐射表(以下简称直接辐射表)的组成、技术要求、试验方法、检验规则、标志、包装、运输、贮存和成套性等。 本标准适用于气象、农业、工业、国防、科研等部门测定太阳直接辐射的仪器。

Pyrheliometer

QX/T 18-2003 人工影响天气作业用37mm高射炮.技术检测规范

本标准规定了专门用于人工影响天气作业的37mm高射炮完整状态主要部件检测的技术要求、检验方法。 本标准适用于人工影响天气作业用的1965年式双管37mm高射炮的技术检测，其他年式37mm高射炮可参照执行。

Technical checkout specifications for 37 mm antiaircraft gun used for weather modification operation

QX/T 17-2003 37mm高炮防雹增雨作业安全技术规范

本标准规定了人工影响天气作业的作业点建设、空域安全、作业安全等内容。 本标准适用于使用口径为37mm高射机关炮，人工防雹增雨弹所进行的人工影响天气作业。

Safety technical specifications for the operation of hail suppression and precipitation enhancement with 37 mm antiaircraft gun

QX/T 11-2002 HM4型电动通风干湿表

本标准规定了HM4型电动通风干湿表的基本参数、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于HM4型电动通风干湿表(以下简称干湿表)设计、生产、检验和验收。

HM4 Electric aspirated psychrometer

QX/T 12-2002 TB1-1型冻土器

本标准规定了冻土器的产品规格、基本参数、要求、试验方法、检验规则和包装、标志、贮存等项要求。 本标准适用于TB1-1型冻土器的设计、生产、检验和验收。

TB1-1 Apparatus for measuring frozen ground deep

QX/T 13-2002 SL2-1型雨量传感器

本标准规定了雨量传感器的基本参数、要求、试验方法、检验规则和标志、包装、运输、贮存。 标准适用于SL2-1型雨量传感器的设计、生产、检验和验收。

SL2-1 Precipitation sensor

QX/T 15-2002 YE1-1型气压检定箱

本标准规定了YE1-1型气压检定箱的要求、试验方法、检验规则和产品标志、包装、贮存等项内容。 本标准适用于YE1-1型气压检定箱的设计、生产、检验和验收。

YE1-1 Calibration equipment for pressure instrument

QX/T 14-2002 EY3-2A型和EY3-2B型电子微风仪

本标准规定了电子微风仪的型式、基本参数、要求、试验方法、检验规则和标志、包装、运输与贮存。 本标准适用于EY3-2A和EY3-2B型电子微风仪(以下简称仪器)的设计、生产、检验和验收。

EY3-2A and EY3-2B thermocouple anemometer

QX/T 16-2002 DJM10型温度检定箱

本标准规定了湿度检定箱的基本参数、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于DJM10型和DJM10A型湿度检定箱设计、生产、检验和验收。

DJM10 Calibration equipment for humidity instrument

ASTM D5096-02 测定杯形风速计或螺旋桨风速计性能的标准试验方法

This test method will provide a standard for comparison of rotating type anemometers, specifically cup anemometers and propeller anemometers, of different types. Specifications by regulatory agencies (4-7) and industrial societies have specified performance values. This standard provides an unambiguous method for measuring Starting Threshold, Distance Constant, Transfer Function, and Off-Axis Response.1.1 This test method covers the determination of the Starting Threshold, Distance Constant, Transfer Function, and Off-Axis Response of a cup anemometer or propeller anemometer from direct measurement in a wind tunnel.1.2 This test method provides for a measurement of cup anemometer or propeller anemometer performance in the environment of wind tunnel flow. Transference of values determined by these methods to atmospheric flow must be done with an understanding that there is a difference between the two flow systems.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer

ASTM D6782-02 直列式干木制湿度计的标准化和校准的标准试验方法

1.1 These test methods apply to instruments designed to detect, or measure, moisture in wood which has been dried below the fiber saturation point. The purpose of these tests is to provide a unified standard against which such systems can demonstrate their suitability for their intended use (see Appendix X1).1.2 The standard is configured to support tests by moisture meter manufacturers as well as end-users of such systems, therefore the text follows two tracks (see Appendix X2).1.3 Test methods specified for manufacturers are generally designed for laboratory settings and are intended to provide a standard against which a manufacturer certifies calibration and general system conformance.1.4 Test methods for end-users are generally designed for field settings and are intended as a standardized set of procedures for determining the suitability of a specific machine for a particular use.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters

ASTM D5096-02(2007) 杯形风速计或螺旋桨式风速计性能测定的标准试验方法

1.1 This test method covers the determination of the Starting Threshold, Distance Constant, Transfer Function, and Off-Axis Response of a cup anemometer or propeller anemometer from direct measurement in a wind tunnel.1.2 This test method provides for a measurement of cup anemometer or propeller anemometer performance in the environment of wind tunnel flow. Transference of values determined by these methods to atmospheric flow must be done with an understanding that there is a difference between the two flow systems. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer

QX/T 1-2000 Ⅱ型自动气象站

本标准规定了Ⅱ型自动气象站的组成、技术要求、试验方法、检验规则、标志、包装、运输、贮存和成套性等。 本标准适用于Ⅱ型站。

Type Ⅱ automatic weather station

JIS B 7920:2000 比重计.试验方法

この規格は，湿度計()の校正方法及び性能試験方法について規定する。注()センサ単体など，それだけでは湿度計として使用できないものは除く。

Hygrometers -- Test method