P00 标准化、质量管理 标准查询与下载

SANS 10120-5 HC:1988 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第5部分：合同管理．第HC节：钢结构的腐蚀防护

Corrosion protection of structural steelwork

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section HC: Corrosion protection of structural steelwork

SANS 10120-2 AB:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第2部分：项目规范．第AB节：工程师的办公室

To meet requirements imposed by various norms of economic development, projects are classified as normal, prestige, subeconomic and labour-based projects.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AB: Engineer's office

SANS 10120-2 INTRO:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第2部分:项目规范,简介

Covers preparation under various circumstances of the two portions of a project specification, namely Portion 1, which covers description of the works and includes general matters affecting the project; and Portion 2, which covers variations and addition

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification, Introduction

SANS 10120-2 A:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第2部分：项目规范．第A节：概述

Covers details of essential, optional and additional clauses that are required in respect of each applicable standardized specification.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section A: General

SANS 10120-2 AA:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第2部分:项目规范．第AA节:概述(小型工程)

For use in projects to be carried out in particular locations or under particular circumstances.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AA: General (small works)

SANS 10120-2 AD:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第2部分：项目规范．第AD节：概述（小水坝）

To meet requirements imposed by various norms of economic development, projects are classified as normal, prestige, subeconomic and labour0based projects.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AD: General (small dams)

SANS 10120-2 AH:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第2部分：项目规范．第AH节：概述（结构）

To meet requirements imposed by various norms of economic development, projects are classified as normal, prestige, subeconomic and labour-based projects.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section AH: General (structural)

SANS 10120-3 INTRO:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第3部分：设计,简介导则

Covers and indication of the contents of the succeeding sections, the economic norms that are considered in design work and in the preparation and use of standardised specifications, responsibility for design, and matters relating to the site inspection.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design, Introduction

SANS 10120-3 A:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第3部分：设计指南．第A节：概述

For use in connection with works of civil engineering construction, prepared under the auspices of the SAICE, SAACE and SAFCEC and recommended by these bodies for general use, and also endorsed by the Divil Engineering Advisory Council for general use.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section A: General

SANS 10120-3 AB:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第3部分：设计指南．第AB节：工程师办公室

Guidance for design - engineer's office

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AB: Engineer's office

SANS 10120-3 AD:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第3部分：设计指南．第AD节：概述（小型水坝）

Guidance for design - General (small dams)

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section AD: General (small dams)

SANS 10120-1:1986 土木工程建筑和合同文件标准规范的使用守则．第1部分：形式和内容

Covers the format and contents of project specifications, standardized specifications and particular specifiations which, together with the schedule of quantities, are required in the preparation of contract documents.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 1: Format and contents

SANS 1200 A:1986 土木工程施工路段标准规范．第A节：概述

This specification covers the principles, responsibilities and requirements generally applicable to all civil engineering construction and building works. NOTE a) Terminology used throughout the standardized specifications is explained because, in terms of the conditions of contract, the Employer, the Contractor and the Engineer have certain rights and obligations that can be exercised most equitably when all parties have a clear understanding of the operations that are covered by each item in the schedule of quantities. As this specification is applicable only to construction, on a prepared site or foundations, of a structure or group of structures that fall within a single work classification (see Annexure A to Part 1 of SABS 0120), only one item is scheduled to cover the cost of the Contractor's obligations of a preliminary and general nature. b) The standards referred to in the specification are listed in Appendix A.

Standardized specification for civil engineering construction Section A: General

SANS 1200 AA:1986 土木工程施工路段标准规范．第AA节：概述（小型工程）

This specification covers the principles, responsibilities and requirements generally applicable to civil engineering construction and building work on small projects such as piling, drilling and sports field contracts, and on buildings, bridges and similar isolated structures and on other minor works. NOTE a) Terminology used throughout the standardized specifications is explained because, in terms of the conditions of contract, the Employer, the Contractor and the Engineer have certain rights and obligations that can be exercised most equitably when all parties have a clear understanding of the operations that are covered by each item in the schedule of quantities. As this specification is applicable only to construction, on a prepared site or foundations, of a structure or group of structures that fall within a single work classification (see Annexure A to Part 1 of SABS 0120), only one item is scheduled to cover the cost of the Contractor's obligations of a preliminary and general nature. b) The standards referred to in the specification are listed in Appendix A.

Standardized specification for civil engineering construction Section AA: General (small works)

SANS 1200 AH:1986 土木工程施工路段标准规范．第AH节：概述（结构）

This specification covers the principles, general responsibilities and requirements applicable to the construction or fabrication and erection of a structure or group of structures in concrete (cast-in-situ, precast or prestressed), steel, aluminium or structural timber. NOTE a) Terminology used throughout the standardized specifications is explained because, in terms of the conditions of contract, the Employer, the Contractor and the Engineer have certain rights and obligations that can be exercised most equitably when all parties have a clear understanding of the operations that are covered by each item in the schedule of quantities. As this specification is applicable only to construction, on a prepared site or foundations, of a structure or group of structures that fall within a single work classification (see Annexure A to Part 1 of SABS 0120), only one item is scheduled to cover the cost of the Contractor's obligations of a preliminary and general nature. b) The standards referred to in the specification are listed in Appendix A.

Standardized specification for civil engineering construction Section AH: General (structural)

SANS 10120-4 INTRO:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第4部分:标准工程数量表,简介

Covers typical schedules of quantities relating to the work covered by standardized specifications.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities, Introduction

SANS 10120-4 A:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第4部分：标准工程数量表．第A节：概述

Covers general guidance on the taking-off of quantities and the preparation of a schedule of quantities.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section A: General

SANS 10120-5 INTRO:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第5部分:合同管理,简介

Covers recommendations and suggestions intended to assist the engineer and the contrctor in executing work covered by the standardized specifications and to assist them to work in harmony by promoting undrstanding of each other's problems.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration, Introduction

SANS 10120-5 A:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第5部分：合同管理．第A节：概述

Explains the format and content of standardized civil engineering specifications and also gives guidance on the drafting of project specifications and other contract documents.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section A: General

SANS 10120-5 AB:1986 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第5部分：合同管理．第AB节：工程师办公室

Explains the format and content of standardized civil engineering and also gives guidance on the drafting of project specifications and other contract documents.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section AB: Engineer's office