P00 标准化、质量管理 标准查询与下载

ASHRAE 90.1 I-P ADD Q-2006 低层住宅除外的建筑物的能源标准

Energy Standard for Buildings Except Low-Rise Residential Buildings

Energy Standard for Buildings Except Low-Rise Residential Buildings

ASHRAE 90.1 SI INT 2-2006 低层住宅除外的建筑物的能源标准

Energy Standard for Buildings Except Low-Rise Residential Buildings

Energy Standard for Buildings Except Low-Rise Residential Buildings

ASHRAE 90.1 SI ADD Q-2006 低层住宅除外的建筑物的能源标准

Energy Standard for Buildings Except Low-Rise Residential Buildings

Energy Standard for Buildings Except Low-Rise Residential Buildings

HJ/T 169-2004 建设项目环境风险评价技术导则

本规范规定了建设项目环境风险评价的目的、基本原则、内容、程序和方法。 本规范适用于涉及有毒有害和易燃易爆物质的生产、使用、贮运等的新建、改建、扩建和技术改造项目(不包括核建设项目)的环境风险评价。新建、改建、扩建和技术改造项目主要系指国家环境保护总局颁布的《建设项目环境保护管理名录》中的化学原料及化学晶制造、石油和天然气开采与炼制、信息化学品制造、化学纤维制造、有色金属冶炼加工、采掘业、建材等新建、改建、扩建和技术改造项目。 本技术导则作为建设项目环境影响报告书环境风险评价篇章的编制与审核的技术依据。

Technical guideline for environmental risk assessment on projects

ARI 710-2004 液体干燥剂作业评定标准

This standard applies to Liquid-line Driers utilizing solid Desiccants designed for use in the liquid line of all types of refrigeration and air-conditioning systems.

Standard for Performance Rating of Liquid-Line Driers

ARI 680-2004 住宅空气过滤设备作业评定标准

This standard applies to factory-made Air Filter Equipment and Air Filter Media, as used in such equipment, for removing particulate matter, when used in environmental conditioning of inhabited spaces in residential facilities.

Standard for Performance Rating of Residential Air Filter Equipment

BIP 2023-2003 建筑规定解释和说明.第12版

The Building Regulations Explained & Illustrated - 12th edition

DB52/ 446-2003 贵州省装饰工程质量检验评定规范

本标准规定了室内装饰工程的施工质量要求、试验方法、检验评定等方面的实施细则。适用于贵州内交付使用后的建筑工程，宾馆、综合楼、写字楼、影剧院、商场、文化设施等大、中型公共建筑、公共建筑部分的厅、堂、场、馆及民用住宅装饰工程的施工检收。

Specifications for Quality Inspection and Evaluation of Decoration Engineering in Guizhou Province

ARI GUIDELINE A-2003 能量消耗监控系统和填充系数装载管理指南

This guideline applies to the installation and operation of Energy Management Systems (EMS) to control heating, ventilating, air conditioning and refrigeration equipment in all applications; residential, commercial and industrial buildings. In the event of any conflict between the manufacturers' specific instructions and these guidelines, the manufacturers' instructions should prevail over these guidelines.

GUIDELINE for ENERGY MANAGEMENT SYSTEMS AND LOAD MANAGEMENT THROUGH DUTY CYCLING

ASTM E699-03 对从事检验、质量保证和评定建筑物构件的机构进行评价的标准实施规范

1.1 This practice provides a guide for the information to be obtained and provides specific recommended criteria for evaluating the capabilities of an agency to conduct inspections and tests and to report on tests performed in accordance with ASTM standards primarily on factory built components and assemblies.1.2 The criteria in this standard describe the basic information used in judging the capability of an agency to perform its intended functions objectively and competently as well as to disclose possible conflicts of interest judged from the standpoint of the user of this standard. Testing, approval, and certification of a company''s own products and services by its own testing agency does not necessarily constitute a conflict of interest.1.3 The criteria presented herein are divided into three categories of endeavor, namely,Part A8212;Standards and Criteria for Testing AgenciesPart B8212;Standards and Criteria for Quality Assurance AgenciesPart C8212;Standards and Criteria for Evaluating Agencies1.4 The fundamental purpose of this practice is to provide criteria for evaluating an agency as denoted in 1.3 either by a user of that service or by an accrediting authority.1.5 It is not the purpose of this practice to provide a basis for determining the quality of a product or service being evaluated.1.6 This practice is not intended for the evaluation of those activities normally associated with the production and sale of products and the like, such as a manufacturer''s internal quality program. However, any organization may request or perform an evaluation of its own in-house facilities under this standard if it so desires.1.7 It is not the intent of this standard to be the basis for the determination of the type of agency to be selected by the user.1.8 This practice can be used in conjunction with Specification E 541 and Practice E 6511.9 Specification E 329 specifies minimum requirements for agencies testing and/or inspecting materials used in construction and which are primarily assembled on the jobsite.

Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components

PD CEN/TR 13833:2003 建筑施工企业资质管理的原则

This European Standard specifies the definitions, procedures, criteria and their assessment as well as the respective documentation related to a system of qualification of construction enterprises.

Qualification of construction enterprises

ASTM E651/E651M-01(2008) 对已建成的建筑物进行系统分析和合格保证的机构的能力评价的标准实施规程

1.1 This practice is intended as a companion standard to Specification E 541, Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building. Specification E 541 covers criteria by which the technical resources of agencies may be evaluated for their capability to perform the system analysis or compliance assurance function, or both, in the evaluation and inspection of manufactured building. This standard includes questions that should be asked of system analysis and compliance assurance agencies in order for the administrative agency to evaluate their competency. Personnel matters are not highlighted in this standard since they are covered in detail in Specification E 541. This is not meant to imply that they are not important. 1.2 The preferred method for utilizing this practice is for qualified personnel of the administrative agency to visit the system analysis and compliance assurance agencies'' headquarters to speak to qualified personnel and examine pertinent records and documentation. Alternatively, the evaluation may be done at any location provided the agency being evaluated is fully informed as to the material and personnel they will need to have on hand for the evaluation. 1.3 Some of the following will not be applicable in the evaluation of an agency that has not had prior experience as a building-evaluation organization. It is not the intent of this practice to preclude acceptance of such an agency provided it can otherwise demonstrate that its organizational procedures and experience in other product categories and experience of key personnel reflect a keen awareness of the problems and processes involved in manufactured building evaluation and thus warrant acceptance. In such instances the administrative agency may wish to consider extending provisional acceptance over a definite period of time, during which it is expected that the agency will have opportunity to gain the requisite experience and demonstrate its capabilities and compliance assurance functions for manufactured building. 1.4 Failure of an agency to respond satisfactorily to one or more criteria in the following should not be sole cause for rejection. Such failure should be brought to the agency''s attention and be subject to close scrutiny during subsequent reevaluations. 1.5 This practice is intended to achieve uniformity in the regulation of manufactured building. It may be necessary to make changes and modifications in order to adapt to legislative or other regulatory requirements of some jurisdictions. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building

ASTM E541-01 从事建成楼房的系统分析和合格保证的机构的标准规范

1.1 This standard was initiated to meet the needs of regulatory programs for the certification of manufactured building. The various statutes differ somewhat in the responsibilities assigned to the administrative agency responsible for implementing the rules and regulations for manufactured building. The administrative agency may utilize the services and facilities of building-evaluation agencies in carrying out its responsibilities for evaluating manufactured building systems. By providing criteria for evaluating these agencies, this standard''s objective is to (1) utilize the voluntary standards system to provide a common base for the various regulatory approaches employed by the authorities having jurisdiction, and (2) make provision for varying degrees of optional technical support for the certification of manufactured building.1.2 To establish an appropriate degree of intra- and inter-state credibility regarding building system evaluations made through governmental or private agencies, the authorities having jurisdiction may wish to utilize an accreditation program for such agencies.1.3 Building-evaluation organizations examined under this standard may include both governmental and private agencies qualified to act on behalf of the public as designee agents (that is, agencies) of the government office having jurisdiction.1.4 This standard covers criteria by which the technical resources of agencies, both governmental and private, may be evaluated for their capability to perform the system analysis or compliance assurance function, or combination thereof, in the evaluation and inspection (certification) of manufactured building. Practice E 651 may be used for the evaluation of such agencies.1.5 These criteria set forth the minimum personnel requirements and the technical and organizational procedures required for agencies engaged in evaluating manufactured building. Other criteria such as independence, financial stability, and objectivity may need to be considered.1.6 Criteria are included for agencies evaluating innovative as well as conventional building systems, against applicable requirements.1.7 Agencies involved in testing, quality assurance and evaluating building components can be evaluated by using Practice E 691.1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building

BOCA IMC-2000 CHAPTER 15-2000 参照标准

The following is a listing of the standards referenced in this code, the effective date of the standard, the promulgating agency of the standard and the section(s) of this code that refer to the standard.

Referenced Standards

BOCA IMC-2000 CHAPTER 6-2000 胆管系统

This table, a nomogram, determines the distribution pipe or manifold length, hole or distribution pipe spacing, number of boles, dis?ibution discharge rate and hole diameter of pressure distribution systems by the placement of a straightedge between two

Duct Systems

BOCA IMC-2000 CHAPTER 3-2000 一般法律法规

The provisions requiring that the excavation left when an unfit structure has been removed be filled in is an obvious, but often neglected means of protecting the public health and safety.

General Regulations

BOCA IMC-2000 CHAPTER 1-2000 行政

This eleventh edition presents the code as originally issued, with changes approved through 1989, and with certain editorial changes made to maintain the sequence of the code, to standardize the format of all 1990 BOCA National Codes, and to update the

Administration

BOCA IMC-2000 CHAPTER 2-2000 定义

This appendix contains various illustrations and diagrams of typical applications of specific code provisions to one- and two-family dwellings and is intended to illustrate the subject matter of the related text.

Definitions

BOCA IMC-2000 APPENDIX B-2000 推荐证收费表

This eleventh edition presents the code as originally issued, with changes approved through 1989, and with certain editorial changes made to maintain the sequence of the code, to standardize the format of all 1990 BOCA National Codes, and to update the

Recommended Permit Fee Schedule

BOCA CHAPTER 31 NBC-1999 专项建设

A person shall not willfully fail or refuse to comply with any lawful order or direction of the fire prevention code officiai or to interfere with the compliance attempts of another individual.

Special Construction