P01 技术管理 标准查询与下载

BS EN 1991-3:2006 欧洲法规1.结构作用.第3部分:起重机和机械感应作用

(1) Part 3 of EN 1991 specifies imposed loads (models and representative values) associated with cranes on runway beams and stationary machines which include, when relevant, dynamic effects and braking, acceleration and accidental forces. (2) Section 1 defines common definitions and notations. (3) Section 2 specifies actions induced by cranes on runways. (4) Section 3 specifies actions induced by stationary machines.

Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machinery

BS EN 1991-1-7:2006 欧洲法规1.建筑物的作用.一般作用.附加作用

(1) EN 1991-1-7 provides strategies and rules for safeguarding buildings and other civil engineering works against identifiable and unidentifiable accidental actions. (2) EN 1991-1-7 defines: – strategies based on identified accidental actions, – strategies based on limiting the extent of localised failure. (3) The following subjects are dealt with in this part of EN 1991: – definitions and symbols (Section 1); – classification of actions (Section 2); – design situations (Section 3); – impact (Section 4); – explosions (Section 5); – design for consequences of localised failure in buildings from an unspecified cause (informative Annex A); – information on risk assessment (informative Annex B); – dynamic design for impact (informative Annex C); – internal explosions (informative Annex D). (4) Rules on dust explosions in silos are given in EN 1991-4. (5) Rules on impact from vehicles travelling on the bridge deck are given in EN 1991-2. (6) EN 1991-1-7 does not specifically deal with accidental actions caused by external explosions, warfare and terrorist activities, or the residual stability of buildings or other civil engineering works damaged by seismic action or fire, etc.

Eurocode 1. Actions on structures - General actions - Accidental actions

NF P06-100-1/A1*NF EN 1990/A1:2006 欧洲法规.设计基础

Eurocode - Basis for Design.

BS EN 1991-4:2006 欧洲法规 1.建筑物的作用.筒仓和槽罐

1.1.1 Scope of EN 1991 - Eurocode 1 (1)P EN 1991 provides general principles and actions for the structural design of buildings and civil engineering works including some geotechnical aspects and shall be used in conjunction with EN 1990 and EN 1992-1999. (2) EN 1991 also covers structural design during execution and structural design for temporary structures. It relates to all circumstances in which a structure is required to give adequate performance. (3) EN 1991 is not directly intended for the structural appraisal of existing construction, in developing the design of repairs and alterations or for assessing changes of use. (4) EN 1991 does not completely cover special design situations which require unusual reliability considerations such as nuclear structures for which specified design procedures should be used. 1.1.2 Scope of EN 1991-4 actions on structures: silos and tanks (1)P This part provides general principles and actions for the structural design of silos for the storage of particulate solids and tanks for the storage of fluids and shall be used in conjunction with EN 1990, other parts of EN 1991 and EN 1992 to EN 1999. (2) This part includes some provisions for actions on silo and tank structures that are not only associated with the stored solids or liquids (e.g. the effects of thermal differentials, aspects of the differential settlements of batteries of silos) (3) The following geometrical limitations apply to the design rules for silos: - the silo cross-section shapes are limited to those shown in Figure 1.1d, though minor variations may be accepted provided the structural consequences of the resulting changes in pressure are considered; - the following dimensional limitations apply: hb/dc < 10 hb < l00 m dc < 60 m - the transition lies in a single horizontal plane (see Figure 1.1a); - the silo does not contain an internal structure such as a cone or pyramid with its apex uppermost, crossbeams, etc. However, a rectangular silo may contain internal ties. (4) The following limitations on the stored solids apply to the design rules for silos: - each silo is designed for a defined range of particulate solids properties; - the stored solid is free-flowing, or the stored solid can be guaranteed to flow freely within the silo container as designed (see 1.5.12 and Annex C); - the maximum particle diameter of the stored solid is not greater than 0,03dc. (5) The following limitations on the filling and discharge arrangements apply to the design rules for silos: - filling involves only negligible inertia effects and impact loads; - where discharge devices are used (for example feeders or internal flow tubes) solids flow is smooth and central. (6) Only hoppers that are conical (i.e. axisymmetric), square pyramidal or wedge-shaped (i.e. with vertical end walls) are covered by this standard. Other hopper shapes and hoppers with internals require special considerations. (7) Some silos with a systematically non-symmetric geometry are not specifically covered by this standard. These cases include a chisel hopper (i.e. a wedge hopper beneath a circular cylinder) and a diamond-back hopper. (8) The design rules for tanks apply only to tanks storing liquids at normal atmospheric pressure. (9) Actions on the roofs of silos and tanks are given in EN 1991-1-1, EN 1991-1-3 to EN 1991-1-7 and EN 1991-3 as appropriate. (10) The design of silos for reliable solids discharge is outside the scope of this standard. (11) The design of silos against silo quaking, shocks, honking, pounding and silo music is outside the scope of this standard. NOTE: These phenomena are not well understood, so the use of this standard does not guarantee that they will not occur, or that the structure is adequate to resist them.

Eurocode 1. Actions on structures - Silos and tanks

KS F ISO 12006-2:2005 房屋建筑.施工信息的编制.第2部分:信息分类框架

이 규격은 일련의 권장 분류표의 명칭과 체계에 대하여 규정하며, 이것들은 정의에 의해 뒷받

Building construction－Organization of information about construction works－Part 2：Framework for classification of information

JG/T 165-2004 建设企业管理信息系统软件通用标准

本标准规定了建设企业管理信息系统的基本要求、企业信息管理、项目信息管理、专业信息管理、系统协同、系统安全和系统实施的基本内容。 本标准适用于工程勘察、工程设计和建筑施工企业的管理信息系统的开发、应用和管理。监理、房地产等其他建设企业管理信息系统的开发、应用和管理，可参照本标准。

General software standard for management information systems of construction enterprises

BS 8000-9:2003 建筑工地上的操作.粘结整平砂浆层和耐磨找平层.实施规范

This part of BS 8000 gives recommendations on laying cementitious levelling screeds and wearing screeds. This British Standard does not cover laying concrete bases or direct finished concrete wearing surfaces, recommendations for which are given in BS 8204-1 and BS 8204-2 respectively. Recommendations on design aspects of levelling screeds and wearing screeds are given in BS 8204-1 and BS 8204-2 respectively. NOTE This code of practice includes supplementary elements in the form of commentaries to assist in its use and understanding. Compliance with the commentaries is not necessary in order to be able to claim conformity with the standard.

Workmanship on building sites - Cementitious levelling screeds and wearing screeds - Code of practice

BIP 2022-2003 建筑物服务设施手册.第2版

A concise summary, in diagrams and text, of all elements of building services. Includes practice, techniques and procedures with references to regulations and standards.

Building Services Handbook - 2nd edition

SANS 10403:2003 建筑采购文件的格式和编制

This standard establishes a format for the compilation of procurement documents for civil engineering activities and sets out the general principles for compiling the procurement documents.

Formatting and compilation of construction procurement documents

NF P03-200:2003 生物木材损毁剂.建筑物或建筑地点寄生虫说明.通用程序

Biological wood destroying agents - Parasite statement in buildings or building sites - General procedures.

NF P03-700:2002 建筑 私人合同 与私人合同中提供建筑工程相关的服务质量

Bâtiment - Marchés privés - Qualité des services associés aux prestations de travaux de bâtiment dans les marchés privés

DIN 4124:2002 坑道和沟渠.工作空间的坡度、铺板和支承柱、宽度

The document applies to unlined and lined building pits and trenches excavated by manual or mechanical methods in which structures (e.g. deep, cellars, tunnels) are erected (e. g. drains, district heating ducts, cable cucts) or lines (e.g. cables, pipes) laid. It specifies the rules according to which building pits and trenches are to be dimensioned and constructed. For simple cases sheeting specifications are given, which are not subject to structural analyses if they are observed (standard sheeting). In accordance with building supervision regulations, structural types deviating from this standard require proof of serviceability, e.g. by means of a general building supervision licence, if their use is not permissible according to other directives introduced for building supervision purpose.#,,#

Excavations and trenches - Slopes, planking and strutting, breadths of working spaces

DIN 33430:2002 职业资格评估程序及其应用要求

The document specifies the requirements for psychological test procedures and their application in job related ability assessments.

Requirements for procedures and their application in job related proficiency assessment

BS ISO 12006-2:2001 建筑施工.施工作业的信息结构.信息分类的框架

This part of ISO 12006 defines a framework and a set of recommended table titles supported by definitions, but not the detailed content of these tables. It is intended for use by organizations which develop and publish classification systems and tables on a national or regional basis. This part of ISO 12006 applies to the complete life cycle of construction works, including design, production, maintenance and demolition, and to both building and civil engineering. It identifies classes for the organization of information and indicates how these classes are related. This part of ISO 12006 lists the tables which are recommended to be developed and used to classify the members of each class according to particular views or principles of specialization and gives examples of entries which might occur in these tables. It does not provide a complete operational classification system. Classification tables may vary in detail to suit local needs.

Building construction - Organization of information about construction works - Framework for classification of information

ISO 12006-2:2001 房屋建筑 施工信息的编制 第2部分：信息分类框架

This part of ISO 12006 defines a framework and a set of recommended table titles supported by definitions, but not the detailed content of these tables. It is intended for use by organizations which develop and publish classification systems and tables on a national or regional basis. This part of ISO 12006 applies to the complete life cycle of construction works, including design, production, maintenance and demolition, and to both building and civil engineering. It identifies classes for the organization of information and indicates how these classes are related. This part of ISO 12006 lists the tables which are recommended to be developed and used to classify the members of each class according to particular views or principles of specialization and gives examples of entries which might occur in these tables. It does not provide a complete operational classification system. Classification tables may vary in detail to suit local needs.

Building construction - Organization of information about construction works - Part 2: Framework for classification of information

HB 10200-2001 IEE现场指南(BS 7671-2001 第16版布线规则)

Enables the competent electrician to deal with small installations (up to 100 A, 3-phase).

IEE On-site Guide (BS 7671:2001, 16th edition Wiring Regulations)

BS 8000-3:2001 建筑工地上的操作.砖石工程的操作规程

BS 8000-3 gives recommendations for basic workmanship in relation to masonry but does not specifically address health and safety issues. For design aspects of masonry, the user is referred to BS 5628. BS 8000-3 does not necessarily cover the use of proprietary systems. The user is referred to the particular recommendations of any technical approval in this case.

Workmanship on building sites - Code of practice for masonry

JIS A 9501:2001 隔热工程的标准实施规程

Standard practice for thermal insulation works

HB 10212-2001 建筑服务手册.综合现行建筑物和结构规则

A concise summary, in diagrams and text, of all elements of building services. Includes practice, techniques and procedures with references to regulations and standards.

Building Services Handbook - Incorporating current building and construction regulations

SL 19-2001 水利基本建设项目竣工.财务决算编制规程

本规程适用于所有列人国家基本建设计划的水利基本建设项目竣工财务决算的编制。利用外资的项目竣工财务决算的编制除执行本规程外，还应执行国家外资项目管理的有关规定。

Compilation rules of final account for completion of water capital construction project