P04 基础标准与通用方法 标准查询与下载

DIN EN 13309:2010 建筑机械.内置电源机械的电磁兼容性;德文版本EN 13309-2010

Construction machinery - Electromagnetic compatibility of machines with internal power supply; German version EN 13309:2010

DIN EN 15643-1:2010 建设工程的可持续性.建筑物的可持续性评定.第1部分:一般框架;德文版本EN 15643-1-2010

Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework; German version EN 15643-1:2010

DIN EN 1991-1-6/NA:2010 国家附录.国家确定参量.欧洲法规1:对建筑物的作用.第1-6部分:一般作用、施工过程中的作用

National Annex - Nationally determined parameters - Eurocode 1: Actions on structures - Part 1-6: General actions, Actions during execution

DIN SPEC 18941:2010 建筑工程的持久性.环境产品声明.通用数据选择和使用的方法;德文版本CEN/TR 15941-2010

Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data; German version CEN/TR 15941:2010

BS 8536:2010 设施管理概述.操作规范

This British Standard gives recommendations for facility management briefing to ensure that design takes account of the expected performance of the facility in use. It is applicable to the provision of documentation supporting this purpose during construction work and/or installation, testing and commissioning, handover and start-up of operations. It is not applicable to the preparation of a project brief or to design development. This British Standard is intended for use by individuals and organizations preparing or contributing to the preparation of a design brief, including owners refurbishing an existing facility, organizations procuring a new facility and designers.

Facility management briefing. Code of practice

BS EN 15643-1:2010 建筑工程的可持续性.建筑物的可持续性评估.总框架

This European Standard provides the general principles and requirements, expressed through a series of standards, for the assessment of buildings in terms of environmental, social and economic performance taking into account technical characteristics and functionality of a building. The assessment will quantify the contribution of the assessed construction works to sustainable construction and sustainable development. The framework applies to all types of buildings and it is relevant for the assessment of the environmental, social and economic performance of new buildings over their entire life cycle, and of existing buildings over their remaining service life and end of life stage. The standards developed under this framework do not set the rules for how the different building assessment schemes may provide valuation methods. Nor do they prescribe levels, classes or benchmarks for measuring performance. The rules for assessment of environmental, social or economic aspects of organizations are not included within this framework. However, the consequences of decisions or actions that influence the environmental, social and economic performance of the object of assessment are taken into account.

Sustainability of construction works. Sustainability assessment of buildings. General framework

BS PD CEN/TR 15941:2010 建筑工程的可持续性.环境产品声明.通用数据的选择和使用方法

This Technical Report supports the development of Environmental Product Declarations (EPD). It assists in using generic data according to the core product category rules (prEN 15804) during the preparation of EPD of construction products, processes and services in a consistent way, and also in the application of generic data in the environmental performance assessment of buildings according to prEN 15978. The requirements for the use of generic data are described in prEN 15804.

Sustainability of construction works — Environmental product declarations — Methodology for selection and use of generic data

BIP 2207-2010 建筑物信息管理.BS 1192标准的标准框架和指南

Building Information Management. A Standard Framework and Guide to BS 1192

BIP 2199-2010 简明欧洲法规.对结构的载荷BS EN 1991:欧洲法规1

Concise Eurocodes - Loadings on Structures BS EN 1991: Eurocode 1

CJ/T 330-2010 电子标签通用技术要求

本标准规定了采用密码技术的电子标签所涉及的应用分类、基本要求、应用要求、安全要求、和电子标签编码的技术要求。 本标准适用于需要采用密码安全技术的电子标签设计开发、生产制造和应用。

General technical requirements of radio frequency identification tags

CJJ/T 141-2010 建设项目交通影响评价技术标准

本标准适用于城市和规划城镇人口规模在10万人以上的镇的建设项目交通影响评价。

Technical standards of traffic impact analysis of construction projects

BS 6100-0:2010 建筑和土木工程.术语表.简介和索引

Building and civil engineering - Vocabulary - Introduction and index

JGJ 195-2010 液压爬升模板工程技术规程

本规程适用于高层建筑剪力墙结构、框架结构核心筒、大型柱、桥墩、桥塔、高耸构筑物等现浇钢筋混凝土结构工程的液压爬升模板装置的设计、制作、安装与拆除、液压爬升模板施工及验收。

Technical specification for the hydraulic climbing formwork engineering

JGJ/T 200-2010 喷涂聚脲防水工程技术规程

本规程适用于混凝土和砂浆表面喷涂聚脲防水工程的材料选择、设计、施工及验收。

Technical specification for spray polyurea waterproofing

JGJ 190-2010 建筑工程检测试验技术管理规范

本规范适用于建筑工程施工现场检测试验的技术管理。

Code for technical management of building engineering inspection and testing

ASTM C1232-10c 圬工标准术语

1.1 This standard incorporates generic terms and generic definitions of terms specifically associated with manufactured masonry units and masonry constructed with manufactured masonry units. These generic terms and definitions are used within the standards developed by Committee C12 on Mortars and Grouts for Unit Masonry and Committee C15 on Manufactured Masonry Units. 1.2 This standard incorporates terms and definitions of terms associated with the standards specific to clay masonry units, in particular to Specifications C32, C34, C56, C62, C126, C212, C216, C279, C410, C530, C652, C902, C1088, C1167, C1261, C1272, and C1405, and to Test Methods C67. 1.3 This standard incorporates terms and definitions of terms associated with the standards specific to concrete masonry units in particular to Specifications C55, C73, C90, C129, C139, C744, C1319, C1372, C1491, C1623, and C1634 and to Test Methods C140, C426, and C1262. 1.4 This standard incorporates terms and definition of terms associated with the standards specific to autoclaved aerated concrete masonry units in particular to Pra......

Standard Terminology of Masonry

ASTM D7338-10 建筑物中霉菌生长评估指南

This guide presents options for a systematic assessment of fungal growth in buildings. This guide allows for site-specific flexibility and professional judgment in the choice of assessment procedures. It may not be necessary to perform in its entirety the basic assessment presented below to resolve a particular problem, for example, where fungal growth is localized and the source and extent of moisture is readily observable. Conversely, no matter how comprehensive the survey, all fungal growth may not be identified or located in a fungal assessment. Material removal or destructive investigation may be needed to access suspect surfaces. Using the procedures described in this guide, the investigator may have obtained the data necessary to suggest specific recommendations, for example, how to remediate the observed fungal growth, or how to prevent further fungal growth, but those recommendations are beyond the scope of this guide. Precautions may be needed to protect the assessor and building occupants where access may disturb fungal growth. It is the user’s responsibility to protect information that may be considered confidential, or private, or both, in accordance with project contract, corporate protocol, or local, state, and federal regulations, or a combination thereof. It may be necessary to enlist other disciplines or trade expertise to assist in some steps of the assessment, but recommendations of when to enlist and whom to enlist are beyond the scope of this guide.1.1 This guide provides a compendium of information and a menu of options for assessment of fungal growth in buildings, but does not recommend a specific course of action. Due to the wide variety of fungal problems affecting buildings and their occupants, and the wide variety of buildings, it is not possible to describe a set of uniform steps that will always be performed during an assessment (that is, a standard practice); therefore the user of this guide must decide which steps are appropriate for a given situation or building. 1.2 This guide is specific to fungal growth, which is only one potential problem in a building environment. It may be part of, but is not intended to take the place of, a comprehensive indoor air quality investigation. 1.3 This guide describes minimum steps and procedures for collecting background information on a building in question, procedures for evaluating the potential for moisture infiltration or collection, procedures for inspection for suspect fungal growth, and procedures beyond the scope of a basic survey that may be useful for specific problems. 1.4 Assessments for fungal growth may be useful wherever fungal growth is suspected, excess moisture has been present or when there are concerns regarding potential fungal growth. 1.5 Periodic fungal assessment in buildings may be a component of preventative maintenance programs. 1.6 This guide is applicable to buildings including residential (for example, single or multi-family), institutional (for example, schools, hospitals), government, public assembly, commercial (for example, office, retail), and industrial facilities. 1.7 Recommendations for developing a sampling strategy or methods for the collection and analysis of fungal samples are beyond the scope of this guide. For recommendations for developing a sampling strategy, see Ref (27) , Chapter 10. 1.8 Recommendations for remediation of fungal growth are beyond the scope of this guide. 1.9 This guide is not intended to supersede any government regulations governing the assessment of fungal growth in buildings. 1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. ......

Standard Guide for Assessment Of Fungal Growth in Buildings

ASTM D6597-10 评估场所封闭达到净化等级标准操作规程

This practice contains a mechanism to determine that the hazardous constituents have been remediated to an acceptable level. This practice assists both the regulator and the owner/operator in establishing cost-effective steps and procedures necessary to determine if the site has achieved its objective for site closure. This practice can be applied to hazardous and nonhazardous spills or leaks, surface impoundments, waste piles, buildings, and tanks. The general nature of this practice allows its use in a large variety of situations.1.1 This practice covers the steps necessary to determine if a site is ready for closure with emphasis on general sampling techniques and how to determine if the agreed upon level of remediation has been achieved. 1.2 A minimum of statistical procedures is used in this practice. 1.3 The standard practice does not address radioactive waste sites nor does it cover every situation that can occur in the field. It does cover the following general sampling techniques: soil sampling, swipe sampling of buildings and equipment, surface impoundments, waste piles, and layered tanks. It does not cover drum sampling, general water sampling and monitoring wells and their construction. 1.4 The values stated in inch-pound units are to be regarded as standard. the values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices to determine the applicability of regulatory limitations prior to use.

Standard Practice for Assessment of Attaining Clean Up Level for Site Closure

ASTM C1232-10b 圬工标准术语

1.1 This standard incorporates generic terms and generic definitions of terms specifically associated with manufactured masonry units and masonry constructed with manufactured masonry units. These generic terms and definitions are used within the standards developed by Committee C12 on Mortars and Grouts for Unit Masonry and Committee C15 on Manufactured Masonry Units. 1.2 This standard incorporates terms and definitions of terms associated with the standards specific to clay masonry units, in particular to Specifications C32, C34, C56, C62, C126, C212, C216, C279, C410, C530, C652, C902, C1088, C1167, C1261, C1272, and C1405, and to Test Methods C67. 1.3 This standard incorporates terms and definitions of terms associated with the standards specific to concrete masonry units in particular to Specifications C55, C73, C90, C129, C139, C744, C1319, C1372, C1491, C1623, and C1634 and to Test Methods C140, C426, and C1262. 1.4 This standard incorporates terms and definition of terms associated with the standards specific to autoclaved aerated concrete masonry units in particular to Pra......

Standard Terminology of Masonry

ANSI/ASTM E2151:2010 独家附属和独立住房性能说明和评价指南术语

Terminology Of Guides For Specifying And Evaluating Performance Of Single Family Attached And Detached Dwellings