P04 基础标准与通用方法 标准查询与下载

NF P01-051:2008 建筑施工的可持续性.一般原则

Sustainability in building construction - General principles.

BS 6100-12:2008 建筑和土木工程.词汇.设备和人员

This part of BS 6100 defines terms for civil engineering that relate to: a) water engineering; b) inland waters, coastal and maritime engineering; c) public health and environmental engineering; d) pipelines and ducts.

Building and civil engineering – Vocabulary Part 12: Plant, equipment and persons

TH 42097-2008 建筑产品指令.要求和CE标志指南

The Construction Products Directive - A guide to the requirements and CE marking

BS 6100-4:2008 建筑和土木工程.词汇.运输

This part of BS 6100 defines civil engineering terms that relate to road, rail and air transport. This standard does not include building types (covered in BS 6100-3), tunnels and bridges (covered in BS 6100-4), building services (covered in BS 6100-8) and water transport, pipelines and ducts (covered in BS 6100-6).

Building and civil engineering - Vocabulary - Part 4: Transport

ISO 15686-8:2008 房屋和建筑资产.工作寿命计划.第8部分:参考工作寿命和工作寿命估算

This part of ISO 15686 provides guidance on the provision, selection and formatting of reference service-life data and on the application of these data for the purposes of calculating estimated service life using the factor method. This part of ISO 15686 does not give guidance on how to estimate the modification part or the values of factors A to G, using given reference in-use conditions and the object-specific in-use conditions.

Buildings and constructed assets - Service-life planning - Part 8: Reference service life and service-life estimation

ISO 15686-5:2008 房屋和建筑资产.工作寿命计划.第5部分:寿命周期成本

This part of ISO 15686 gives guidelines for performing life-cycle cost (LCC) analyses of buildings and constructed assets and their parts. NOTE 1 Life-cycle costing takes into account cost or cash flows, i.e. relevant costs (and income and externalities if included in the agreed scope) arising from acquisition through operation to disposal. NOTE 2 Life-cycle costing typically includes a comparison between options or an estimate of future costs at portfolio, project or component level. Life-cycle costing is performed over an agreed period of analysis. It is advisable to make clear whether the analysis is for only part or for the entire life cycle of the constructed asset.

Buildings and constructed assets - Service-life planning - Part 5: Life-cycle costing

BS PD 6695-1-9:2008 符合BS EN 1993-1-9标准的构筑物的设计推荐性规范

This Published Document gives non-contradictory complementary information for use in the UK with BS EN 1993-1-9 and its UK National Annex.

Recommendations for the design of structures to BS EN 1993-1-9

SANS 10111-2-3:2008 几何产品规范(GPS).几何公差.最大实体要求(MMR)，最小实体要求(LMR)及可逆要求(RPR)

Defines the maximum material requirement, the least material requirement and the reciprocity requirement, and specifies their applications.

Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)

NS 8409-2008 关于建筑产品的购买用合同单的一般条款

General conditions for contracts concerning the purchase of construction products

GJB 6307-2008 军事工程测量基本原则

本标准规定了军事工程中开展测量工作的基本原则，为诸军兵种在军事工程建设的勘察设计、施工、安装调试、运营管理等阶段的测量工作提供统一的技术依据，规范军事工程测量生产及管理。 本标准适用于各类军事工程测量技术标准的编写和军事工程测量任务的设计、实施。在其他相关领 域应用时，本原则也可参照执行。

Fundamental principles for military engineering surveying

SANS 7870-1:2008 控制图.第1部分:一般指南

Presents key elements and philosophy of the control chart approach, and identifies a wide variety of control charts (including those related to the Shewhart control chart and those stressing process acceptance or on-line process adjustment).

Control charts Part 1: General guidelines

ANSI/SMACNA 008-2008 已使用建筑物处于修建状态下的IAQ导则

The IAQ Guideline provides project management in maintaining satisfactory indoor air quality (IAQ) of occupied buildings undergoing renovation or construction. The Guideline covers how to manage the source of air pollutants, control measures, quality control and documentation, communication with occupants. It includes example projects, tables, references, resources, and checklists.

IAQ Guidelines for Occupied Buildings Under Construction

NF P72-203-1-2:2008 建筑工程.石膏板工程.第1-2部分:材料的选择用通用标准

Building works - Gypsum plasterboards works - Part 1-2 : General criteria for selection of materials.

NF P72-203-2:2008 建筑工程.石膏板的铺设工程.第2部分:特殊管理条款合同单

Building works - Gypsum plasterboards works - Part 2 : contract bill of special administrative clauses.

BS 6100-6:2008 建筑与土木工程.词汇.结构部件

This part of BS 6100 defines terms for buildings and civil engineering works, including: a) external works; b) walls and cladding; c) roofs and roofing; d) floors and ceilings; e) stairs and circulation elements; f) doors, windows and openings; g) jointing products; h) builders’ hardware and accessories; i) finishes; j) signs and signing. This standard does not define terms for structural members and foundations (covered in BS 6100-4) or building services (covered in BS 6100-8).

Building and civil engineering - Vocabulary - Construction parts

BS 1192:2007 建筑工程和结构信息相结合的产品.实施规范

This standard establishes the methodology for managing the production, distribution and quality of construction information, including that generated by CAD systems, using a disciplined process for collaboration and a specified naming policy. It is applicable to all parties involved in the preparation and use of information throughout the design, construction, operation and deconstruction throughout the project lifecycle and the supply chain. The principles for information sharing and common modelling are equally applicable to building and civil projects. This standard is also a guide for developers of software applications to enable them to support its implementation through the provision of configuration files or application add-ons.

Collaborative production of architectural, engineering and construction information – Code of practice

BS 6100-7:2008 建筑和土木工程.词汇.第7部分:设备

This part of BS 6100 defines terms for the systems, installations and equipment that: a) provide water, electricity, heat, warm air and gases; b) facilitate internal communication and transport, lighting and waste removal. This standard does not define terms outside the curtilage of premises, e.g. water supply and public health engineering, which are both covered in BS 6100-6.

Building and civil engineering – Vocabulary – Part 7: Services

BS 1192:2007+A2:2016 建筑工程和结构信息相结合的产品.实施规范

Collaborative production of architectural, engineering and construction information – Code of practice

ISO 22263:2008 有关建筑工程信息的组织.工程信息管理用框架

This International Standard specifies a framework for the organization of project information (process-related as well as product-related) in construction projects. Its purpose is to facilitate control, exchange, retrieval and use of relevant information about the project and the construction entity. It is intended for all agents in the project organization in management of the construction process as a whole and in coordination of its sub-processes and activities. This framework consists of a number of generic parameters that are applicable to projects of varying complexity. size and duration and is adaptable to national, local and project-specific variations of the construction process.

Organization of information about construction works - Framework for management of project information

ANSI/ASME Y14.31-2008 未标尺寸的制图

This standard establishes the requirements for undimensioned drawings. Undimensioned drawings define items graphically rather than by the use of dimensions.

Undimensioned Drawings