P04 基础标准与通用方法 标准查询与下载

ANSI/ASME Y14.31-2008 未标尺寸的制图

This standard establishes the requirements for undimensioned drawings. Undimensioned drawings define items graphically rather than by the use of dimensions.

Undimensioned Drawings

SANS 10111-2-1:2007 工程制图．第二部分：几何公差．第一节：几何形位公差；形状；方位，位置和偏转公差．制图的概述；定义；符号和表示法

Gives requirements for the geometrical tolerancing of workpieces. It represents the initial basis and defines the fundamentals for geometrical tolerancing.

Engineering drawing Part 2: Geometrical tolerancing Section 1: Tolerancing of form, orientation, location and run-out - Generalities, definitions, symbols, indications on drawings

ISO 21930:2007 建筑施工的可持续性.建筑制品的环境声明

This International Standard provides the principles and requirements for type III environmental declarations (EPD) of building products. This International Standard contains specifications and requirements for the EPD of building products. Where this International Standard contains more specific requirements, it complements ISO 14025 for the EPD of building products. This International Standard provides a framework for and the basic requirements for product category rules (PCR) as defined in ISO 14025 for type III environmental declarations of building products. Type III environmental declarations for building products, as described in this International Standard, are primarily intended for use in business-to-business communication, but their use in business-to-consumer communication under certain conditions is not precluded. This International Standard does not define requirements for developing type III environmental declaration programmes. Requirements for type III environmental declaration programmes are found in ISO 14025. The working environment is not included in this International Standard because it is normally a subject for national legislation. NOTE In this International Standard, EPD is an abbreviation used to represent both the single and plural full form designation of “environmental product declaration”, which is intended to be synonymous with the designation “type III environmental declaration”. In the practice of developing EPD, programmes or their declarations are referred to by various names such as eco-leaf, eco-profile, environmental declaration of product, environmental product declaration (EPD), and environmental profile.

Sustainability in building construction - Environmental declaration of building products

PP 8888-1-2007 学校和学院用BS8888-2006技术产品规范指南

A guide for schools and colleges to BS 8888:2006, Technical Product Specification

JGJ 8-2007 建筑变形测量规范

本规范适用于工业与民用建筑的地基、基础、上部结构及场地的沉降测量、位移测量和特殊变形测量。

Code for deformation measurement of building and structure

BS 6100-9:2007 建筑和土木工程.词汇.混凝土和灰泥工程

This part of BS 6100 defines terms for work with concrete and plaster, including binders, additives, aggregates, concretes and mortars, fibrous and gypsum plasters, and formwork.

Building and civil engineering - Vocabulary - Work with concrete and plaster

BS 6100-3:2007 建筑和土木工程.词汇.土木工程.总则

This part of BS 6100 defines terms within the civil and structural engineering industry, including: a) structural design and structural members; b) earthworks; c) substructures, foundations and piles; d) tunnels and tunnelling; and e) superstructures, including large span structures and bridges.

Building and civil engineering – Vocabulary – Part 3: Civil engineering – General

GJB 6117-2007 装备环境工程术语

本标准规定了装备环境工程专业通用术语及环境因素、环境效应、环境分析、环境适应性设计、环境试验的常用术语。 本标准适用于装备寿命周期各阶段开展的有关环境工程工作。

Materiel environmental engineering terms

BS 6100-2:2007 建筑和土木工程.词汇.空间、建筑类型、环境和城乡规划

This part of BS 6100 defines terms that relate to: a) spaces; b) building types characterized by their use; c) environmental and physical planning.

Building and civil engineering – Vocabulary – Part 2: Spaces, building types, environment and physical planning

BS 6100-10:2007 建筑和土木工程.词汇.合同术语

This part of BS 6100 defines terms for contractual procedures, including: a) general concepts; b) project information; c) design phase; d) contracts; e) financial; f) construction; g) post-construction maintenance; Measurement terms are excluded and can be found in BS 6100-11. Terms for project participants are also omitted and can be found in BS 6100-12. NOTE The structure of this standard has been updated in line with ISO 6707-2.

Building and civil engineering – Vocabulary – Part 10: Contract terms

BS 6100-11:2007 建筑和土木工程.词汇.性能特征、测量和连接

This part of BS 6100 defines terms for performance, characteristics, measurement and joints.

Building and civil engineering – Vocabulary – Part 11: Performance, characteristics, measurement and joints

CSA O325-07-2007 建筑中间涂料 第1版 [取代：CSA O325.1-88-CAN/CSA]

Revêtements intermédiaires de construction première édition [Superseded: CSA O325.1-88-CAN/CSA]

Construction Intermediate Coatings First Edition [Superseded: CSA O325.1-88-CAN/CSA]

ASHRAE 135 ERTA-2007 BACnet 建筑自动化和控制网A数据电信条约

BACnet A Data Communication Protocol for Building Automation and Control Networks Replaces Errata 02/07/2007

BACnet A Data Communication Protocol for Building Automation and Control Networks Replaces Errata 02/07/2007

NF P06-113-1/NA*NF EN 1991-1-3/NA:2007 欧洲法规1:对建筑物作用.第1-3部分:一般作用.雪负荷.NF EN 1991-1-3-2004的国家附录.一般作用.雪载荷

Eurocode 1 - Actions on structures - Part 1-3 : general actions - Snow loads - National annex to NF EN 1991-1-3:2004 - General actions - Snow loads.

BIP 2133-2007 建筑规则.说明和图解.第13版

The Building Regulations: Explained and Illustrated provides a detailed, authoritative and well illustrated guide to building control in England and Wales. This latest edition has been substantially revised to include revised chapters on Part A Structural Stability, Part C Materials, Part E Sound, Part F Ventilation, Part L Conservation of Fuel and Power, Part M Access, and a completely new chapter on Part P Electrical Safety.

The Building Regulations - Explained and illustrated - 13th edition

PP 8888-2-2007 工程绘图规程:继续教育和高等教育使用BS 8888:2000的技术产品规范(TPS)指南

Engineering drawing practice: a guide for further and higher education to BS 8888:2006, Technical product specification (TPS)

HG/T 21544-2006 预埋件通用图

本标准图适用于非地震区及抗震设防烈度为6～9度地区建（构）筑物在常温下的普通钢筋混凝土或预应力混凝土结构中的预埋件。 本标准图不适用于轻质混凝土及其他特种混凝土的预埋件。

General drawing of embedded parts

BS DD CEN/TS 15117:2005 直接扩展应用导则

This Technical Specification gives guidance for the direct and extended application instructions, in order to fulfil the instructions from the EU Commission to evaluate the reaction to fire performance of products as placed on the market and of its end-use application(s), where relevant.

Guidance on direct and extended application

CSA O325-07-CAN/CSA-2007 建筑的中间涂层.第1版[代替:CSA O325.0-92-CAN/CSA,CSA O325.0-92-CAN/CSA,CSA O325.0-92-CAN/CSA]

Construction Sheathing first edition [Superseded: CSA O325.0-92-CAN/CSA, CSA O325.0-92-CAN/CSA, CSA O325.0-92-CAN/CSA]

Construction Sheathing first edition [Superseded: CSA O325.0-92-CAN/CSA]

BS EN 15221-1:2006 设备管理.第1部分:术语和定义

This European standard gives relevant terms and definitions in the area of Facility Management. It also provides insight into the scope of Facility Management.

Facility Management - Part 1: Terms and definitions