P09 卫生、安全、劳动保护 标准查询与下载

DL/T 5370-2007 水电水利工程施工通用安全技术规程

本标准规定了水电水利工程施工的通用安全技术要求。 本标准适用于大中型水电水利工程施工安全技术管理、安全防护与安全施工,小型水电水利工程可参照执行。

General technical specincation for safety of hydroelectric and hydraulic engineering construction

DL/T 5371-2007 水电水利工程土建施工安全技术规程

本标准规定了水电水利工程土建施工安全的技术要求。 本标准适用于大中型水电水利工程土建施工的安全技术管理、安全防护与安全施工。小型水电水利工程土建施工可参照执行。

Technical code of safety for hydroelectric and hydraulic civil construction engineering

JIS A 1901 ERRATUM 1:2007 勘误表

ERRATUM

BS 8411:2007 建筑工地和其他场所安全网实施规范

This British Standard provides guidance and recommendations on the safe use, erection and effective maintenance of safety nets on construction sites and other works where there is a risk of fall. It is applicable generally to safety nets that conform to BS EN 1263-1 and that are erected within the positioning limits given in BS EN 1263-2. However, as these standards are very specific, this British Standard also gives advice on how to assess the reliability of safety nets outside these limits. NOTE This advice is given in Annex B. This British Standard covers safety net systems “S”, “T” and “U” as given in BS EN 1263-2. It does not cover system “V”. This British Standard does not cover temporary support nets, which are intended for persons to stand on either for access, egress or work.

Code of practice for safety nets on construction sites and other works

SN/T 1878-2007 紧急出口装置通用技术要求

本标准规定了紧急出口装置（exit devices）（也称通道锁，本标准中视需要简称装置）及门锁附件、自动和自体上闩暗插销、可移除式直棂、顺序器和连动杆的要求，包括循环、操作、强度、材料评估和表面处理测试等性能要求，以及功能和类型的描述和编号。 本标准适用于对紧急出口装置及附件的评估、测试、分级和认证。

General requirements of exit devices

DB62/T 1602-2007 电气防火检测技术规范

本标准规定了电气防火检测技术规范的总则及变配电所、室内低压配电线路、照明装置和一般地亚用电设备、接地和等电位连接、特殊场所、电气火灾隐患检测和判断方法、检测及其结果处理。本标准适用于10kV及以下电力用户的电气防火检测。本规范不适用于矿井下、爆炸危险场所以及防静电、防雷和消防设施的电气防火检测。

Technical specifications for electrical fire detection

ANSI/ASSE Z359.3-2007 定位和经过限制系统的安全性要求

This standard establishes requirements for the performance, design, marking, qualification, test methods, and instructions of lanyards and harnesses comprising personal positioning and travel restraint systems.

Safety Requirements for Positioning and Travel Restraint Systems

ANSI/ASSE A10.22-2007 建造和拆除作业的导绳和非引导工人升降机的安全性要求

This standard establishes minimum safety requirements for temporary personnel hoisting systems used for the transportation of persons to and from working elevations during normal construction and demolition operations, including maintenance, and is restricted to use in special situations.

Safety Requirements for Rope-Guided and Nonguided Workers' Hoists for Construction and Demolition Operations

ANSI/ASSE Z359.1-2007 个人用防坠落系统,子系统和组件的安全性要求

This standard establishes requirements for the performance, design, marking, qualification, instruction, training, inspection, use, maintenance and removal from service of connectors, full body harnesses, lanyards, energy absorbers, anchorage connectors, fall arresters, vertical lifelines, and self-retracting lanyards comprising personal fall arrest systems for users within the capacity range of 130 to 310 pounds (59 to 140 kg).

Safety Requirements for Personal Fall Arrest Systems, Subsystems, and Components

DB11/ 382-2006 建设工程安全监理规程

为了促进北京市建设工程施工阶段安全生产监理工作(以下简称安全监理)的程序化、规范化、科学化，提高建设工程施工阶段安全监理工作的水平，落实安全监理职责，制定本规程。本规程依据《建设工程安全生产管理条例》、《北京市安全生产条例》、《建设工程监理规范》等有关建设工程安全监理的法规和标准编制。本规程是对《建设工程监理规程》的补充。本规程适用于北京地区新建、扩建、改建和拆除的建设工程施工阶段安全监理活动。

Specification of safety construction supervisio

ANSI A10.3-2006 火药驱动的紧固系统的安全要求

This standard provides safety requirements for a powder-actuated fastening system (tool or machine) that propels a stud, pin, fastener, or other object for the purpose of affixing it, by penetration, to hard structural material. (such as floors, walls, c

Safety Requirements for Powder-Actuated Fastening Systems

DIN EN ISO 16000-11:2006 室内空气.第11部分:建筑产品和家具释放挥发性有机化合物的测定.取样、样品储藏和试验样品制备

Studies of emission of volatile organic compounds (VOCs) from building products or furnishing in test chambers or cells require proper handling of the product prior to testing and during the testing period. The present standard specifies sampling, storage of samples, the transport conditions and the preparation of test specimens.

Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006); English version of DIN EN ISO 16000-11:2006-06

ASTM D5116-06 小型环境室室内装修材料/产品有机物排放量测定的标准导则

DESIG: D5116 06 ^TITLE: Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products ^SCOPE:1. Scope 1.1 This guide provides guidance on determination of emissions of organic compounds from indoor materials and products using small-scale environmental test chambers.1.2 This guide pertains to chambers that fully enclose a material specimen to be tested and does not address other emission chamber designs such as emission cells (see instead Practice D 7143).1.3 As an ASTM standard, this guide describes options, but does not recommend specific courses of action. This guide is not a standard test method and must not be construed as such.1.4 The use of small environmental test chambers to characterize the organic emissions of indoor materials and products is still evolving. Modifications and variations in equipment, testing procedures, and data analysis are made as the work in the area progresses. For several indoor materials, more detailed ASTM standards for emissions testing have now been developed. Where more detailed ASTM standard practices or methods exist, they supersede this guide and should be used in its place. Until the interested parties agree upon standard testing protocols, differences in approach will occur. This guide will continue to provide assistance by describing equipment and techniques suitable for determining organic emissions from indoor materials. Specific examples are provided to illustrate existing approaches; these examples are not intended to inhibit alternative approaches or techniques that will produce equivalent or superior results.1.5 Small chambers have obvious limitations. Normally, only samples of larger materials (for example, carpet) are tested. Small chambers are not applicable for testing complete assemblages (for example, furniture). Small chambers are also inappropriate for testing combustion devices (for example, kerosene heaters) or activities (for example, use of aerosol spray products). For some products, small chamber testing may provide only a portion of the emission profile of interest. For example, the rate of emissions from the application of high solvent materials (for example, paints and waxes) via brushing, spraying, rolling, etc. are generally higher than the rate during the drying process. Small chamber testing can not be used to evaluate the application phase of the coating process. Large (or full-scale) chambers may be more appropriate for many of these applications. For guidance on full-scale chamber testing of emissions from indoor materials refer to Practice D 6670.1.6 This guider does not provide specific guidance for the selection of sampling media or for the analysis of volatile organics. This information is provided in Practice D 6196.1.7 The guide does not provide specific guidance for determining emissions of formaldehyde from pressed wood products, since large chamber testing methods for such emissions are well developed and widely used. For more information refer to Test Method E 1333. It is possible, however, that the guide could be used to support alternative testing methods.1.8 This guide is applicable to the determination of emissions from products and materials that may be used indoors. The effects of the emissions (for example, toxicity) are not addressed and are beyond the scope of the guide. Guide D 6485 provides an example of the assessment of acute and irritant effects of VOC emissions for a given material. Specification of "target" organic species of concern is similarly beyond the scope of this guide. As guideline levels for specific indoor contaminants develop, so too will emission test protocols to provide relevant information. Emissions databases and material labeling schemes will also be expected to adjust to reflect the current state of knowledge.1.9 Specifics related to the acquisition, handling, conditioning, pr......

Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products

ANSI/ASSE A10.17-2006 热混合沥青建筑的安全操作规程

Applies to those operations involving hot mix asphalt (bituminous) mixtures and materials for construction and resurfacing. Safe work practices are included for the protection of workers and the public and are to be considered the vital safety requirements for designers, manufacturers and installers of such equipment and materials.

Safe Operating Practices for Hot Mix (HMA) Construction

DL/T 5333-2005 水电水利工程爆破安全监测规程

本标准规定了水电水利工程爆破安全监测、设计、实施方法等。 本标准适用于大中型水电水利工程各类建筑结构物相关的爆破安全监测工作。其他工程的爆破安全监测可参照执行。

Code for blasting safety monitoring of hydropower and water resoruces engineering

BS EN 13020:2004 涂层设备.喷涂有机粉末涂层材料的喷涂室.安全要求

This document applies to road surface treatment machines, which are in particular: sprayers; aggregate spreaders; machines for surface repairs (spot mix patching units); mastics asphalt mixers; hot asphalt containers; cold asphalt laying / micro-asphalt-paving machines; (see also Clause 3). Road surface treatment machines can be mounted on a carrier vehicle, trailer or articulated truck, combining to form an integral unit. It is also possible to mount a road surface treatment machine on its own chassis construction and propulsion system (self-propelled or pedestrian-controlled). In all cases the machine and chassis form an integral unit. Directives and standards for the vehicular truck chassis aspects, termed 'carrier vehicle' in this document, would be those relative to that equipment, even where specific modifications have been made to realize the road surface treatment application. The use in public road traffic is governed by the national regulations. This document deals with all significant hazards identified through a risk assessment relevant to road surface treatment machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This document does not deal with significant hazards associated with pressurized tanks, noise and EMC. This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards associated with machine operation, setting and adjustments, load discharge and routine maintenance. This document does not include requirements for the carrier vehicles or special constructions. These are covered in directives related to the construction of vehicles. Demountable bodywork systems (e.g. demountable containers) are specified in other standards. This document does not deal with the risks associated with the operation of the machines in potentially explosive atmospheres. This document applies to machines which are manufactured after the date of approval of this standard by CEN.

Road surface treatment machines-Safety requirements

JGJ 46-2005 施工现场临时用电安全技术规范

本规范适用于新建、改建和扩建的工业与民用建筑和市政基础设施施工现场临时用电工程中的电源中性点直接接地的220/380V三相四线制低压电力系统的设计、安装、使用、维修和拆除。 建筑施工现场临时用电工程专用的电源中性点直接接地的200/380V三相四线制低压电力系统，必须符合下列规定： 1 采用三级配电系统； 2 采用TN-S接零保护系统； 3 采用二级漏电保护系统。

Technical code for safety of temporary electrification on construction site

ANSI/ASSE A10.20-2005 瓷砖,水磨石和大理石作业的安全性要求

Establishes safety requirements for construction operations and equipment used in the handling and installation of ceramic tile, terrazzo, and marble. The types of construction are not listed. The standard is intended to apply to buildings of all kinds and to heavy construction, such as work in tunnels.

Safety Requirements for Ceramic Tile, Terrazo, and Marble Work

DB13(J) 45-2003 建设工程施工安全规程

根据《河北省建设厅关于下达2003年度河北省工程建设标准 和标准图集编制计划的通知》(冀建质[2003]54号)的要求，规程 编制组在广泛调查研究，认真总结实践经验，并广泛征求意见的基 础上，制定了本规程。 本规程是以建设部颁发的《建筑施工安全检查标准》(JGJ59-99) 为主线，按照现行的国家标准、规范、规程的有关规定，结合我省 的实际情况，融入我省建设行政主管部门多年来印发的有关建设工 程安全生产管理的规范性文件而编写.其主要内容是:1总则;2 术语:3基本规定;4安全生产保证体系;5施工现场;6土石方和 基础;7模板:8高处作业;9脚手架;10施工现场临时用电; 11起重机械;12起重吊装;13施工机具;14市政工程施工现场; 15管道工程;16道路工程;17桥梁工程;18顶管工程;19市政 工程施工机具;20季节施工。本规程适用于河北省行政区域内的各类房屋建筑及其附属设 施的建设工程以及与其配套的线路、管道和设备的安装工程;各类 房屋装修工程;市政基础设施建设工程。 各类房屋建筑及其附属设施和市政基础设施的拆除工程，参照 本规程执行。

construction safety regulations

DB31/T 307-2004 建筑物清洁保养验收规范

Specifications for acceptance of building cleaning and maintenance