P15 工程抗震 标准查询与下载



共找到 338 条与 工程抗震 相关的标准,共 23

Eurocode 8. Design of structures for earthquake resistance. General rules, seismic actions and rules for buildings

ICS
91.120.25
CCS
P15
发布
2005-04-08
实施
2005-04-08

Linear accelerators and targets are considered nonreactor nuclear facilities. Incidental use and generation of radioactive materials in a facility operation (e&, check and calibration sources and use of radioactive sources in research, experimental, and analytical laboratory activities, electron microscopes, and X-ray machines) would not ordinarily require the facility to be included in this definition.

Seismic Design Criteria for Structures, Systems, and Components in Nuclear Facilities

ICS
91.120.25
CCS
P15
发布
2005-01-01
实施

These provisions are for the design and construction of structural steel members and connections in the Seismic Load Resisting Systems in buildings and other structures. The design forces in these structures shall result from earthquake motions determined on the basis of various levels of energy dissipation in the inelastic range of response.

Seismic Provisions for Structural Steel Buildings

ICS
91.100.30;91.120.25
CCS
P15
发布
2005
实施

本标准规定了地震应急避难场所以及相关的应急设施、设备和周边道路指示的标志。本标准适用于地震等自然灭害,也适用于在其它事件应急状态下,供居民紧急疏散的公园、公共绿地、城市广场、体育场、学校运动场等地震应急避难场所及疏散道路标志设置。

Signs for earthquake emergency shelter

ICS
91.12
CCS
P15
发布
2004-3-22
实施
2004-5-1

Earthquake resistant construction rules - Earthquake resistant rules applicables to buildings, called PS 92.

ICS
91.080.01;91.120.25
CCS
P15
发布
2004-11-01
实施
2004-11-20

本标准规定了地磁台站观测场地勘选、观测设施和观测室建设、建筑物磁性跟踪控制和观测设备配置的技术要求,适用于地磁台站建设,不同地磁台站根据功能要求和设备配置,按本标准相关部分执行。流动地磁观测点的选建、弱磁性测量实验室的建设可参照使用。

Specification for the construction of seismic station.Geomagnetic station

ICS
91.120.25
CCS
P15
发布
2004-07-16
实施
2004-12-01

本通则适用于抗震设防烈度不大于9度(设计基本地震加速度值不大于0.40g)地区建筑工程的抗震设计、隔震设计及其质量控制。 本通则第1~6章中有关抗菌素震设计的基本原理、原则和方法,也可供其他土木工程(如桥梁、水工结构等)抗震设计参考应用。

General rule for performance-based seismic design of buildings

ICS
91.120.25
CCS
P15
发布
2004-05-25
实施
2004-08-01

本部分规定了钻孔地倾斜和地应变台站建设中观测场地勘选、仪器墩与观测室建设、设备配置的技术要求,适用于地震监测预报和相关科学研究的钻孔地倾斜和地应变台站的建设。

Specification for the construction of seismic station crust deformation station.Part 2:Crust tilt and strain observator in borehole

ICS
91.120.25
CCS
P15
发布
2003-11-03
实施
2004-05-01

本部分规定了断层形变台站建设中观测场地勘选、仪器墩与观测室建设、设备配置的技术要求,适用于为地震监测预报和相关科学研究服务的断层形变台站的建设。

Specification for the construction of seismic station crust deformation station.Part 3:Fault-crossing crust deformation observatory

ICS
91.120.25
CCS
P15
发布
2003-11-03
实施
2004-05-01

本部分规定了洞室地倾斜和地应变台站建设中观测场地勘选、仪器墩与观测室建设、设备配置的技术要求,适用于地震监测预报和相关科学研究的洞室地倾斜和地应变台站的建设。

Specification for the construction of seismic station crust deformation station.Part 1:Crust tilt and strain observator in cave

ICS
91.120.25
CCS
P15
发布
2003-11-03
实施
2004-05-01

本标准规定了重力台站建设中的观测场地勘选、仪器墩与观测室建设、设备配置的技术要求,适用于地震监测预报和相关地球科学研究的重力台站的建设。

Specification for the construction of seismic station gravity observatoty

ICS
91.120.25
CCS
P15
发布
2003-11-03
实施
2004-05-01

本标准规定了氡气固体源的检定内容、检定方法,适用于地震行业校准测氡仪器用的氡气固体源的检定。

Calibration code of Radon gas solid source

ICS
91.120.25
CCS
P15
发布
2003-11-03
实施
2004-05-01

本标准规定了地震台站的编码规则及地震台站的代码,本标准适用于国内与地震台站代码有关的数据管理、处理与交换。

Code of seismic station

ICS
91.120.25
CCS
P15
发布
2003-09-05
实施
2004-02-01

本标准规定了使用数字水准仪进行测量的技术要求,施测和仪器检测方法及数据处理,适用于地壳形变监测的区域和流动水准测量,定点水准测量,也适用于使用数字水准仪进行一、二等水准测量和精密工程测量。

Specification for the digital leveling of crustal deformation for seismology

ICS
91.120.25
CCS
P15
发布
2003-09-05
实施
2004-02-01

本标准规定了地震及地震前兆测项的分类与代码,适用于地震及地震前兆信息的汇集、管理、交换和应用。

Classification and code of seismic observation item and observation item for earthquake precursor

ICS
91.120.25
CCS
P15
发布
2003-06-13
实施
2003-12-01

This example is based on an actual wood frame school building. The purpose of this example is to demonstrate the use of the Tier 1 Checklists only. While this structure meets all of the requirements set forth in Tier 1, it should be noted that this is an ideal case; in most evaluations, there will be statements that are non-compliant, requiring that the deficiencies be reported or that a Deficiency-Only Tier 2 Evaluation be conducted.

Seismic Evaluation of Existing Buildings

ICS
91.120.25
CCS
P15
发布
2003-01-01
实施

本标准规定了数字强震动加速度仪的技术要求、检验方法、检验规则及环境适用性,适用于数字强震动加速度仪的设计、生产和质量监督。

Digital strong motion accelerograph

ICS
91.120.25
CCS
P15
发布
2001-12-03
实施
2002-05-01

This International Standard specifies principles of evaluating seismic actions for the seismic design of buildings, towers, chimneys and similar structures. Some of the principles can be referred to for the seismic design of structures such as bridges, dams, harbour installations, tunnels, fuel storage tanks, chemical plants and conventional power plants. The principles specified in this International Standard do not cover nuclear power plants, since these are dealt with separately in other International Standards. In regions where the seismic hazard is low, methods of design for structural integrity may be used in lieu of methods based on a consideration of seismic actions. This International Standard is not a legally binding and enforceable code. It can be viewed as a source document that is utilized in the development of codes of practice by the competent authority responsible for issuing structural design regulations. NOTE 1 This International Standard has been prepared mainly for engineered structures. The principles are, however, applicable to non-engineered structures. NOTE 2 The qualification of the level of seismic hazard that would be considered low depends on not only the seismicity of the region but other factors, including types of construction, traditional practices, etc. Methods of design for structural integrity include regional design horizontal forces which provide a measure of protection against seismic actions.

Basis for design of structures - Seismic actions on structures

ICS
91.080.01;91.120.25
CCS
P15
发布
2001-12-01
实施

本规程适用于非抗震设防和抗震设防烈度为6~8度 、建高度不大于150m的民用建筑中点支式玻璃幕墙工程的设计、制作、安装及验收。

Technical specification for point supported glass curtain wall

ICS
91.120.25
CCS
P15
发布
2001-08-31
实施
2001-11-01

本规程适用于抗震设防烈度为6~9度地区屋和桥梁结构的隔震设计与施工。抗震设防烈度大于9度的地区,可参照本规程执行。其它结构或设备的隔震设计与施工,也可参照本规程执行。

Technical specification for seismic-isolation with laminated rubber bearing isolators

ICS
91.120.25
CCS
P15
发布
2001-08-15
实施
2001-11-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号