P23 木结构工程 标准查询与下载

ISO 16598:2015 木结构. 锯木材的结构分类

This International Standard provides a basic international framework for establishing structural classes for sawn timber.

Timber structures - Structural classification for sawn timber

DIN 20000-7:2015 结构中建筑产品的应用. 第7部分: 符合DIN EN 15497的结构型指形接合实心木材

Application of construction products in structures - Part 7: Structural finger jointed solid timber according to DIN EN 15497

BS EN 14199:2015 实施特殊岩土工程 微电池

Execution of special geotechnical works. Micropiles

DB11/T 1190.1-2015 古建筑结构安全性鉴定技术规范 第1部分：木结构

Technical Specifications for Safety Appraisal of Ancient Building Structures Part 1: Timber Structures

JIS A 3301:2015 木结构校舍构造的设计标准

Design standards for wooden construction of school buildings

BS EN 1075:2014 木结构 测试方法 由冲孔金属板紧固件制成的接头

Timber structures. Test methods. Joints made with punched metal plate fasteners

GOST R 56711-2015 木制结构的销型连接. 规格

Pin type connection for wooden structures. Specifications

GOST R 56710-2015 木制结构粘合芯体连接. 规格

Connections on the pasted cores for wooden structures. Specifications

GOST R 56705-2015 木制结构. 术语和定义

Wooden structures. Terms and definitions

LY/T 2403-2014 园林机械 手持式电动绿篱修剪机

本标准规定了手持式电动绿篱修剪机的术语与定义，形势和型号编制方法，技术要求及试验方法，检验规则，标志，使用说明书，包装，运输，贮存。

Garden machinery-Hand-held electric hedge trimmers

LY/T 2377-2014 木质结构材料用销类连接件连接性能试验方法

本标准规定了木质结构材料用销类金属连接件连接性能试验方法。本标准适用于销类金属连接件连接木质结构材料时连接性能的测定。

Test methods for the joint performance with dowel type fasteners used in wooden structural material

LY/T 2389-2014 轻型木结构建筑覆面板用定向刨花板

本标准规定了轻型木结构建筑覆面板用定向刨花板的术语和定义、分类、要求、试验方法、抽样方法及判定规则、工厂质量控制、标识、包装、运输和贮存等。 本标准适用于轻型木结构建筑覆面板用的定向刨花板，包括用作屋面板、墙面板和楼面板的定向刨花板。本标准涉及的定向刨花板其胶合等级为暴露I级。

Oriented strand board for light wood frame construction sheathing

LY/T 2388-2014 轻型木结构连接件通用技术条件

本标准规定了轻型木结构连接件的术语和定义、要求、检验方法、检验规则和标志、包装、运输、贮存等。本标准适用于轻型木结构用金属连接件(以下简称“连接件”)。

General specification for connector of light wood-frame construction

LY/T 2380-2014 楼面和屋面用结构人造板在集中荷载和冲击荷载作用下承载性能测试方法

本标准规定了结构人造板在建筑中作为楼面板和屋面板受到集中荷载或冲击荷载作用时,其变形和承载能力的试验方法。本标准适用于在建筑中用作楼面板和屋面板的结构人造板。

Standard test method for performance of wood-based floor and roof sheathing under concentrated static and impact loads

LY/T 2381-2014 结构用木质材料基本要求

本标准规定了结构用木质材料的术语和定义、分类、要求、标识、包装、运输和贮存。本标准适用于工程结构用途的各种木质材料。

General requirements for structural wood products

LY/T 2383-2014 结构用木材强度等级

本标准规定了结构用木材的强度等级,以及锯材群木材强度等级的确定规则。本标准适用于结构用锯材。

Strength classes for structural timber

DIN EN 1995-1-1/A2:2014 欧洲规范5: 木材结构设计. 第1-1部分: 总则. 通则及建筑用准则; 德文版本EN 1995-1-1-2004/A2-2014

Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings; German version EN 1995-1-1:2004/A2:2014

BS EN 16449:2014 木材和木基制品. 木材和转化为二氧化碳生物碳含量的计算

Wood and wood-based products. Calculation of the biogenic carbon content of wood and conversion to carbon dioxide

BS EN 14080:2013 木结构. 木料胶合板和胶合实木. 要求

Timber structures. Glued laminated timber and glued solid timber. Requirements

ASTM D5456-14 结构复合木制品评估的标准规范

1.1 This specification recognizes the complexity of structural glued products. Consequently, this specification covers both specific procedures and statements of intent that sampling and analysis must relate to the specific product. 1.2 This specification was developed in the light of currently manufactured products as defined in 3.2. Materials that do not conform to the definitions are beyond the scope of this specification. A brief discussion is found in Appendix X1. 1.3 Details of manufacturing procedures are beyond the scope of this specification. Note 1—There is some potential for manufacturing variables to affect the properties of members that are loaded for sustained periods of time. Users of this specification are advised to consider the commentary on this topic in Appendix X1. 1.4 This specification primarily considers end use in dry service conditions, such as with most protected framing members, where the average equilibrium moisture content for solid-sawn lumber is less than 168201;%. The conditioning environment of 6.3 is considered representative of such uses. 1.5 The performance of structural composite lumber is affected by wood species, wood element size and shape, and adhesive and production parameters. Therefore, products produced by each individual manufacturer shall be evaluated to determine their product properties, regardless of the similarity in characteristics to products produced by other manufacturers. Where a manufacturer produces product in more than one facility, each production facility shall be evaluated independently. For additional production facilities, any revisions to the full qualification program in accordance with this specification shall be approved by the independent qualifying agency. 1.6 This specification is intended to provide manufacturers, regulatory agencies, and end users with a means to evaluate a composite lumber product intended for use as a structural material. 1.7 This specification covers initial qualification sampling, mechanical and physical tests, analysis, and design value assignments. Requirements for a quality-control program and cumulative evaluations are included to ensure maintenance of allowable design values for the product. 1.8 This specification, or parts thereof, shall be applicable to structural composite lumber portions of manufactured structural components. 1.9 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Evaluation of Structural Composite Lumber Products