P30 工业与民用建筑工程综合 标准查询与下载

JGJ/T 21-1993 V型折板屋盖设计与施工规程

Specification for design and construction of V-style recurved roof cover

BS 7641:1993 建筑物的性能标准.面积和空间显示值的计算和定义

This International Standard deals with the definition and calculation of surface area and volume indi-cators. In defining area measurement, this International Standard uses the intra-muros and extra-muros concept. The wall centre method of measurement used in many parts of the world, or for particular types of buildings, is not considered in this Interna-tional Standard. The surface area and volume indicators defined in this International Standard are intended for practical use, as a basis for measuring various aspects of the performance of buildings or as a planning aid. In other words, they should enable judgement to be made on functional, technical and economic as-pects. This International Standard is intended to be used when establishing: — specifications for the geometric performance of a building and its spaces (e.g. in design, pur-chasing procedures, etc., or in building regu-lations where appropriate); — technical documentation relating to the perform-ance of whole buildings prepared by designers, contractors and manufacturers. — evaluation, comparison or control of the proper-ties of a building which are connected to its geometric performance.

Performance standards in building - Definition and calculation of area and space indicators

BS 7643-1:1993 建筑施工 用户需求的表达 散热要求

This part of ISO 6242 defines how the thermal re-quirements of building users can be identified, ex-pressed and quantified. It describes users' objectives and the parameters used to express them. For each parameter, it specifies units of measurement, preferred increments for values and means of evaluation. It also lists the environmental and human factors affecting the choice of a value (criterion) for each parameter. It is intended for use a) in preparing briefs for building projects; b) in formulating building laws and regulations; c) in drafting standards and other normative docu-ments; and d) more generally when specifying the required performance of buildings in terms of users' re-quirements. Some of the parameters given in this part of ISO 6242 apply only to certain types of building. Compliance with this part of ISO 6242 does not therefore depend on implementing the whole of its contents in every case.

Building construction. Expression of users' requirements. Thermal requirements

BS 7643-2:1993 建筑施工 用户需求的表达 空气洁净度要求

This part of ISO 6242 defines how the air purity re-quirements of building users can be identified, ex-pressed and quantified. It describes users' objectives and the parameters used to express them. For each parameter, it specifies units of measurement, preferred increments for values and means of evaluation. It also lists the environmental and human factors affecting the choice of a value (criterion) for each parameter. It is intended for use a) in preparing briefs for building projects; b) in formulating building laws and regulations; c) in drafting standards and other normative docu-ments; and d) more generally when specifying the required performance of buildings in terms of users' re-quirements. Some of the parameters given in this part of ISO 6242 apply only to certain types of building. Compliance with this part of ISO 6242 does not therefore depend on implementing the whole of its contents in every case.

Building construction. Expression of users' requirements. Air purity requirements

BS 7643-3:1993 建筑施工 用户需求的表达 声学要求

This part of ISO 6242 defines how the acoustical re-quirements of building users can be identified, ex-pressed and quantified. It describes users' objectives and the parameters used to express them. For each parameter, it specifies units of measurement, preferred increments for values and means of evaluation. It also lists the environmental and human factors affecting the choice of a value (criterion) for each parameter. It is intended for use a) in preparing briefs for building projects; b) in formulating building laws and regulations; c) in drafting standards and other normative docu-ments; and d) more generally when specifying the required performance of buildings in terms of users' re-quirements. Some of the parameters given in this part of ISO 6242 apply only to certain types of building. Compliance with this part of ISO 6242 does not therefore depend on implementing the whole of its contents in every case.

Building construction. Expression of users' requirements. Acoustical requirements

BS 7642:1993 建筑性能标准 绩效评价标准的内容和格式

This International Standard establishes some rules for the contents and presentation of standards for evaluation of performance in buildings. It is intended for application by international and national standards committees when preparing standards for evaluation of the performance of whole buildings, of parts of buildings (components, assemblies and subsystems) and of spaces within and around buildings.

Performance standards in building. Contents and format of standards for evaluation of performance

JGJ/T 16-1992（条文说明） 民用建筑电气设计规范

Code for Electrical Design of Civil Buildings

JGJ/T 16-1992 民用建筑电气设计技术规范

Code for electrical design of civil buildings

BOCA CHAPTER 6 NBC COMM V1-1993 各类建设

The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe installation and maintenance of all mechanical equipment and systems in order to protect the public health, sa

Types of Construction

BOCA CHAPTER 5 NBC-1993 一般建筑限制

This eleventh edition presents the code as originally issued, with changes approved through 1989, and with certain editorial changes made to maintain the sequence of the code, to standardize the format of all 1990 BOCA National Codes, and to update the

General Building Limitations

BOCA CHAPTER 6 NBC-1993 各类建设

Each of the BOCA National Codes is completely updated and published in a new edition every three years. Code change activity is conducted annually within each three-year edition cycle. The first and second year’s approved changes are published in supple

Types of Construction

BOCA CHAPTER 5 NBC COMM V1-1993 一般建筑限制

This appendix contains various illustrations and diagrams of typical applications of specific code provisions to one- and two-family dwellings and is intended to illustrate the subject matter of the related text.

General Building Limitations

BOCA CHAPTER 4 NECC-1993 建筑围护结构节能与暖通空调系统节能

The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe installation and maintenance of all mechanical equipment and systems in order to protect the public health, sa

Heating, Ventilating and Air-Conditioning Systems and Equipment

BOCA CHAPTER 3 NECC-1993 建筑围护结构

This appendix contains various illustrations and diagrams of typical applications of specific code provisions to one- and two-family dwellings and is intended to illustrate the subject matter of the related text.

Building Envelope

ISO 9836:1992 建筑物的性能标准 面积和空间指标的定义和计算

In defining area measurement, uses the intra-muros and extra-muros concept. The indicators defined are intended for practical use, as a basis for measuring various aspects of the performance of buildings or as a planning aid. Intended to be used when establishing 1) specifications for the geometric performance of a building and its spaces, 2) technical documentation relating to the performance of whole buildings, 3) evaluation, comparison or control of the properties of a building which are connected to its geometric performance.

Performance standards in building; definition and calculation of area and space indicators

JIS A 1419:1992 建筑物隔音等级

Classification of air-borne and impact sound insulation for buildings

BS 6472:1992 建筑物振动(频率为1-80Hz)对人影响的评定指南

Guidance on human response to building vibration which can be detected by the occupants and can affect them in various ways. Tentative guidance is given on vibration magnitude at which adverse comment may arise.

Guide to evaluation of human exposure to vibration in buildings (1 Hz to 80 Hz)

CSA S406-92-CAN/CSA-1992 保护木质基础的建筑.通用指令第1号

This Standard applies to protective headwear for industrial, construction, mining, utility, and forestry workers. It defines the areas of the head that are to be protected and includes basic performance requirements for dielectric strength, impact atten

Construction des fondations en bois Trait镕iche No 1; Mise ?jour no 2: Septembre 2009

ASTM E1465-92 新式低层住宅设计和建造用氡控制方案的选择

1.1 This guide covers design and construction methods for reducing radon entry into new low-rise residential buildings, and methods for facilitating postconstruction radon mitigation. 1.2 These methods are based on radon mitigation procedures that have been used successfully for various foundation types, and include options to accommodate regional construction practices and site conditions. 1.3 These methods should not be considered as the only acceptable methods available to reduce indoor radon levels, and are not intended to preclude or limit the use of other effective options. 1.4 This guide is intended to assist designers, builders, building officials and others involved in the construction of low-rise residential buildings.

Guide for Radon Control Options for the Design and Construction of New Low Rise Residential Buildings

DIN EN 26891:1991 木结构.用机械紧固件进行的连接.测定强度和变形特性的一般原理.(ISO 6891-83)

The standard contains general principles for the determination of the strength and deformation (slip) characteristics of joints made with mechanical fasteners. It is applicable to joint used in statically loaded timber structures.

Timber structures; joints made with mechanical fasteners; general principles for the determination of strength and deformation characteristics (ISO 6891:1983); german version EN 26891:1991