P46 供热、采暖工程 标准查询与下载

BS EN 14337:2005 建筑物供暖系统.直接电房间供暖系统的设计和安装

This document specifies the design criteria for electrical heating systems in individual and collective residential buildings, the commercial and industrial building sector. This doucment covers fixed electrical heaters which emit heat directly into space by use of electricity only. The following systems are included: — electric instantaneous heating systems: — natural or fan convector heaters; — radiant panels; — radiators / resistance heaters; — ceiling heating; — infra-red and quartz linear heaters; — thin slab floor heating; — wall heating. — electric non-instantaneous heating systems: — full slab floor heating; — room storage heaters; — room storage fan heaters. This document does not cover radiant electric fires, movable heaters or electric heating systems that require a transfer medium outside of the appliance to deliver heat into the space. Examples of such systems include: — air conditioning or cooling systems; — unitary heat pumps; — window, through the wall and split system; — warm air distribution systems; — central storage serving hot water radiator or warm air systems; — hot water production, either storage or direct; — any individual appliance serving more than one room. Requirements for installation, commissioning, and operation maintenance and use of direct electrical heating systems are excluded from this document. This document does not overwrite national regulations. This document does not override or add to requirements in appliance standards.

Heating systems in buildings - Design and installation of direct electrical room heating systems

ASHRAE 90440-2006 暖通空调简化解决方案手册

ASHRAE has compiled this publication with care, but ASHRAE has not investigated, and ASHRAE expressly disclaims any duty to investigate, any product, service, process, procedure, design, or the like that may be described herein. The appearance of any technical data or editorial material in this publication does not constitute endorsement, warranty, or guaranty by ASHRAE of any product, service, process, procedure, design, or the like. ASHRAE does not warrant that the information in the publication is free of errors, and ASHRAE does not necessarily agree with any statement or opinion in this publication. The entire risk of the use of any information in this publication is assumed by the user.

HVAC Simplified Solutions Manual

CJJ 105-2005 城镇供热管网结构设计规范

本规范适用于城镇供热管网工程中下列结构的设计： 1 放坡开挖或护壁施工的明挖管沟及检查室； 2 独立式管道支架，包括固定支架、导向支架及活动支架。

Code for structural design of heating pipelines in city and town

CJJ 104-2005 城镇供热直埋蒸汽管道技术规程

本规程适用于工作压力小于或等于1.6MPa，温度小于或等于350℃，直接埋地敷设的保温蒸汽管道的设计、施工、验收及运行维护。不适用于抽真空保温结构的直埋蒸汽管道。

Technical specification for directly buried steam heating pipeline in city

ASHRAE 4769-2005 用于取暖和空调负荷计算RP-1199的住宅热平衡法

The Residential Heat Balance Method for Heating and Cooling Load Calculations RP-1199

The Residential Heat Balance Method for Heating and Cooling Load Calculations RP-1199

ASHRAE 4768-2005 用于取暖和空调负荷计算RP-1199住宅负荷因子法的发展

Development of the Rsidential Load Factor Method for Heating and Cooling Load Calculations RP-1199

Development of the Rsidential Load Factor Method for Heating and Cooling Load Calculations RP-1199

ASHRAE 90343-2005 噪音和振动控制暖通空调系统(IP)的实用指南

Practical Guide to Noise and Vibration Control for HVAC Systems (IP)

Practical Guide to Noise and Vibration Control for HVAC Systems (IP)

CJJ 28-2004 城镇供热管网工程施工及验收规范

Code for construction and acceptance of city heating pipelines

JIS C 3651:2004 加热设备的安装方法

この規格は，一般の場所において.使用電圧が交流600V以下の発熱線，発熱シート及び発熱ポードを，道路，駐車場，造営物の造営材，バイプラインなどの工作物の内部若しくは表面，又は地中，地表，空中若しくは水中に固定するヒーティング施設の施工方法について規定する。ただし，発熱線等を機械器具の構成要素のーつとして使用する場合には適用しない。備考一般の場所とは，次に該当する場所以外の場所をいう。a)可燃性ガス又は引火点40°C以下の引火性液体の蒸気が空気中に存在して危険な濃度となる場所.若しくはそのおそれがある場所。b)爆燃性粉じん，導電性粉じん，可燃性粉じん又は易燃性繊維が存在するために，電気設備が点火源となって爆発又は火災を生じるおそれがある場所。c)セルロイド，マッチ，石油類その他の燃えやすい危険な物質を製造又は貯蔵する場所。d)火薬類取締法(昭和25年法律第149号)の適用を受ける火薬庫，火薬類製造所又は火薬類取扱所。

Installation methods of heating facilities

BS CWA 45547:2004 混合热力和能量的测定手册

Manual for determination of combined heat and power (CHP)

JGJ 142-2004 地面辐射供暖技术规程

Technical specification for floor radiant heating

ASHRAE 90414-2004 高层商业大厦的暖通空调设计指南

HVAC Design Guide for Tall Commercial Buildings

HVAC Design Guide for Tall Commercial Buildings

ASHRAE AN-04-4-2-2004 空气处理机组和无空空能源交换机的生命周期评估(LCA)

Life-Cycle Assessment (LCA) of Air-Handling Units with and without Air-to-Air Energy Exchangers

Life-Cycle Assessment (LCA) of Air-Handling Units with and without Air-to-Air Energy Exchangers

ASHRAE NA-04-2-4-2004 为了回应ASHRAE规模,主观的温暖与热的偏好,室内与室外温度,大家都喜欢感受中性吗？

Do People Like to FeelNeutral? Response to the ASHRAE Scale for Subjective Warmth in Relation to Thermal Preference, Indoor and Outdoor Temperature

Do People Like to Feel"Neutral"? Response to the ASHRAE Scale for Subjective Warmth in Relation to Thermal Preference, Indoor and Outdoor Temperature

ASTM E1509-04 颗粒燃料燃烧型房间加热器的标准规范

1.1 This specification covers performance requirements, test methods, and marking requirements for automatic feed, pellet fuel-burning room heaters that are intended to burn wood pellets or other suitable solid fuel. These room heaters shall be drafted by forced or natural means.1.2 Exhaust venting systems and associated externally mounted draft inducers are not evaluated by this specification unless they are part of an engineered system provided as part of the room heater. Parts specifically evaluated and determined to be acceptable for use with pellet fuel-burning room heaters are required to be specified in the room heater manufacturer''s instructions and are to be used in evaluating the room heater.1.3 Pellet fuel-burning room heaters covered by this specification are intended for installation in accordance with the applicable requirements of NFPA 211 and in accordance with the applicable building and mechanical codes.1.4 Pellet fuel-burning room heaters covered by this specification are acceptable for use in manufactured homes when installed in accordance with the Manufactured Home Construction and Safety Standards published by the Department of Housing and Urban Development (HUD). See 24 CFR 3280.1.5 The terms "product" or "room heater," as used in this specification, refer to all pellet fuel-burning room heaters or any part thereof covered by the requirements of this specification, unless specifically noted otherwise.1.6 No information provided in this specification is intended to prevent the use of other methods or devices, provided that sufficient technical data are submitted to the authority having jurisdiction to demonstrate that the proposed method or device is equivalent in quality, strength, fire endurance, effectiveness, durability, and safety to that prescribed in this specification.1.7 The notes incorporated into this specification are not prescriptive requirements. They are given for clarification and informational purposes only.1.8 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.9 The following safety hazards caveat pertains only to the test methods portion, Section , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Room Heaters, Pellet Fuel-Burning Type

BS EN 12831:2003 建筑物供暖系统.设计热负荷的计算方法

This standard specifies methods for calculating the design heat loss and the design heat load for basic cases at the design conditions. Basic cases comprise all buildings: - with a limited room height (not exceeding 5 m); - assumed to be heated to steady state conditions under the design conditions. Examples of such buildings are: residential buildings; office and administration buildings; schools; libraries; hospitals; recreational buildings; prisons; buildings used in the catering trade; department stores and other buildings used for business purposes; industrial buildings. In the annexes, information is also given for dealing with the following special cases: - high ceiling buildings or large enclosure; - buildings where air temperature and mean radiant temperature differ significantly.

Heating systems in buildings - Method for calculation of the design heat load

BS EN 12828:2003 建筑物中的供暖系统.水暖系统的设计

This standard specifies design criteria for water based heating systems in buildings with a maximum operating temperature of up to 105℃. In case of heating systems with maximum operating temperatures over 105℃ other safety aspects than those described in 4.6 may apply. The other clauses of this standard are still valid for those systems. This standard does not cover additional safety requirements which may be applicable to heating systems greater than 1 MW design heat load. This standard does not amend product standards or product installation requirements. This standard covers the design of: — heat supply systems; — heat distribution systems; — heat emission systems; — control systems. This standard takes into account heating requirements of attached systems (e.g. domestic hot water, process heat, air conditioning, ventilation) in the design of a heat supply, but does not cover the design of these systems. This standard does not cover requirements for installation or commissioning or instructions for operation, maintenance and use of water based heating systems. This standard does not cover the design of fuel and energy supply systems.

Heating systems in buildings - Design for water-based heating systems

CECS 150-2003 高效燃煤锅炉房设计规程

本规程适用于具有下列技术参数的燃煤锅炉房： 蒸汽锅炉，额定蒸发量1~75t/h；额定出口压力（表压）≤3.82MPa；额定出口温度≤450℃；热水锅炉；额定热功率0.7~64MW；额定出口压力（表压）≤1.6MPa；额定出口温度≤150℃ 额定热功率116MW、额定出口压力2.5MPa、额定出口温度180℃的热水锅炉，可参照本规程执行。

Specification for design of efficient coal-fired boiler houses

JG/T 148-2002 钢管散热器

本标准规定了钢管散热器的符号和缩略语、要求、试验方法、检验规则、标志、包装、运输与存储等。 本标准适用于工业、民用建筑中以热水为热媒的散热器。采暖系统应为闭式系统，非采暖季应满水保养。热媒中含氧量每立方米不得大于0.1g,pH值(20℃)不得小于8，氯离子质量分数不大于120×10-6。散热器的最大工作压力为1.OMpa。

Steel tube radiator

CJJ 34-2002 城市热力网设计规范

Design code of district heating network