P47 供气工程 标准查询与下载

CJ/T 334-2010 集成电路（IC）卡燃气流量计

本标准规定了集成电路（IC）卡燃气流量计的结构、性能要求、试验方法、检验规则及标志、包装。 本标准适用于最大工作压力不超过0.1MPa、最大瞬时流量不超过5000m/h(101.325kPa，293.15K)的IC卡流量计。 本标准不适用于基表为膜式燃气表的IC卡流量计。

Integrated circuit(IC)card gas flow-meter

AS 3645:2010 气体设备基本要求

This Standard sets out requirements for gas equipment to ensure that the equipment— (a) is constructed in accordance with good engineering practice in regard to safety and other requirements; and (b) does not endanger the safety of persons (particularly children, the elderly and people with disabilities), domestic animals or property when properly installed, maintained and used in applications for which it is designed. The essential requirements as set out in this Standard represent the minimum safety and other requirements for gas equipment. Other issues related to fitness for purpose, serviceability, installation and certification are covered in relevant Standards. Gas equipment specifically designed for use in industrial processes carried out on industrial premises is excluded.

Essential requirements for gas equipment

CECS 267-2009 橡胶膜密封储气柜工程施工质量验收规程　

本规程适用于城镇燃气、冶金、化工、污水处理、煤矿等行业橡胶膜密封储气柜工程的施工质量验收；本规程适用于容积1000m以上储气柜本体工程(含1000m)的施工质量验收。不同行业的特殊要求按照工程项目的设计文件执行。　

Specification for construction quality acceptance of rubber seal gasholer

CJJ 94-2009 城镇燃气室内工程施工与质量验收规范

为统一城镇燃气室内工程的施工与质量验收，保证城镇燃气室内工程的施工质量，确保安全供气，制定本规范。 本规范适用于供气压小于或等于0.8MPa（表压）的新建、扩建和改建的城镇居民住宅、商业用户、燃气锅炉房（不含锅炉本体）、实验室、工业企业（不含用气设备）等用户室内燃气管道和用气设备安装的施工与质量验收。

Code for construction and quality acceptance of city indoor gas engineering

BS EN 15001-2:2008 天然气基础设施.工业和非工业装置用工作压力≥5bar和工业装置用工作压力≥0.5bar供气装置管道工程.试运转、操作和维护用详细功能要求

This European Standard specifies detailed functional requirements for the commissioning, operation and maintenance of • industrial gas installations and assemblies with an operating pressure greater than 0,5 bar and of • non-industrial gas installations (residential and commercial) with an operating pressure greater than 5 bar, starting from the outlet of the network operator’s point of delivery up to the inlet connection to the gas appliance; normally the inlet isolation valve. This European Standard also covers the inlet connection to the gas appliance comprising of the pipework that does not fall within the scope of the appliance standard. This standard applies to gas installations operating at ambient temperatures between –20 °C and 40 °C and operating pressures up to and including 60 bar. For operating conditions outside these limitations, reference should additionally be made to EN 13480 for metallic pipework. For industrial gas installations up to and including 0,5 bar and for non-industrial (residential and commercial) gas installations up to and including 5 bar EN 1775 applies. For gas installations that do not fall within the scope of EN 1775 or other European Standards, this European Standard applies. In this European Standard, the term “gas“ refers to combustible gases, which are gaseous at 15 °C and 1 013 mbar absolute atmospheric pressure. These gases are commonly referred to as manufactured gas, natural gas or Liquefied Petroleum Gas (LPG). They are also referred to as first, second or third family gases (see table 1 of EN 437:2003). LPG storage vessels (including all ancillaries fitted directly to storage vessels) are excluded. Also excluded are LPG installations and sections of LPG installations operating at vapour pressure (e.g. between the storage vessel and its pressure regulator). In this European Standard, all pressures are gauge pressures unless otherwise stated. For gas installations within the scope of this standard, national legislation and regulations have to be taken into account. Functional requirements for design, selection of materials, construction, inspection and testing of industrial gas installations and assemblies with an operating pressure greater than 0,5 bar and of gas installations greater than 5 bar in buildings and areas intended for residential, commercial, public and mixed uses are described in prEN 15001-1.

Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commission

CJ/T 288-2008 预制双层不锈钢烟道及烟囱

本标准规定了预制双层不锈钢烟道及烟囱的术语和定义、型号编制、材料、结构和尺寸、性能要求、试验方法、检验规则、标志、包装、运输、贮存、烟道及烟囱的安装。 本标准适用于以厚度为0.6mm~l.5mm的不锈钢板、在工厂制造、在使用现场组装的预制双层不锈钢烟囱。预制双层不锈钢烟囱用于公共建筑物中的燃油燃气锅炉、直燃型溴化锂吸收式冷热水机组、柴油发电机、厨房的排烟系统，长期连续使用温度低于450℃、短期不连续使用温度低于550 ℃，有冷凝液的废气、烟气的输送和排放。

Factory-made stainless steel flue and chimneys

CJ/T 296-2008 燃气用非定尺不锈钢波纹管及接头

本标准规定了燃气用非定尺不锈钢波纹管及接头(简称"波纹管及接头")的产品分类、技术要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于公称尺寸DNlO~DN50，公称压力PN≤0.4 MPa的燃气用非定尺不锈钢波纹管及接头。

Undetermined dimension corrugated stainless steel tubes and connector used in fuel gas piping systems

CJ/T 112-2008 IC卡膜式燃气表

本标准规定了最大流量为160m /h的IC卡膜式燃气表的技术要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于IC卡膜式燃气表(以下简称燃气表)的设计、生产、试验与验收。

Integrated circuit and diaphragm gas meter

GJJ 63-2008 聚乙烯燃气管道工程技术规程

Technical regulations on polythene gas pipework

ASHRAE 120-2008 测定HVAC通气道及接头流动阻力的试验方法

This standard may be used to determine the change in total pressure resulting from airflow in HVAC ducts and fittings. The test results can be used to determine duct flow losses in pressure loss per unit length. Fitting losses are reported as local loss coefficients. This standard does not cover interpretation of test data.

Method of Testing to Determine Flow Resistance of HVAC Ducts and Fittings

CJ 274-2008 城镇燃气调压器

本标准规定了城镇燃气（人工煤气、天然气、液化石油气和液化石油气—空气混合气等，下同）输配系统用的燃气调压器（以下简称调压器）的术语、定义和符号、分类和标记、结构与材料、技术要求、试验 方法、检验规则、标志、标签、使用说明书以及包装、运输、储存。 本标准适用于进口压力不大于 4.OMPa 、工作温度范围不超出-20 ℃～60 ℃且不低于燃气露点温度、公称尺寸不大于 300mm 的调节管道燃气后压的调压器。 本标准不适用于稳压器和瓶装液化石油气用的调压器。 凡本标准提到或未注明的压力值均指表压值，单位为 MPa 。

City gas pressure regulators

CJ/T 50-2008 瓶装液化石油气调压器

Pressure regulators for liquefied petroleum gas cylinders

CJ/T 275-2008 城镇燃气调压箱

本标准规定了城镇燃气输配系统用燃气调压箱（以下简称为“调压箱”）的术语和定义、型号编制、结构要求、技术要求、试验方法、检验和验收、质量证明书、标志、包装、运输和储存。 本标准适用于进口压力不大于 1.6MPa，工作温度不超出-20 ℃～60 ℃的调压箱。 本标准不适用于地下调压箱。

City gas pressure regulating station

CJJ 63-2008 聚乙烯燃气管道工程技术规程

本规程适用于工作温度在-20～40℃，公称直径不大于630mm，最大允许工作压力不大于0.7MPa的埋地输送城镇燃气用聚乙烯管道和钢骨架聚乙烯复合管道工程的设计、施工及验收。 乙烯管道和钢骨架聚乙烯复合管道严禁用于室内地上燃气管道和室外明设燃气管道。

Technical specification for polyethylene (PE) fuel gas pipeline engineering

DB11/T 451-2007 液化石油气、压缩天然气供应站安全运行管理规范

Management specification for safe operation of liquefied petroleum gas and compressed natural gas supply stations

CJ/T 259-2007 城镇燃气用二甲醚

本标准规定了城镇燃气用二甲醚的要求、试验方法、检验规则与标志、包装、运输和储存。 本标准适用于城镇居民、商业和工业企业用的城镇燃气用二甲醚。

Dimethyl ether for city gas

DB42/ 408-2006 建筑燃气安全技术规程

Safety Technical Specification for Gas of Buliding

DB13(J) 61-2006 城镇燃气管道及设备安装工程施工质量验收规程

本规程是根据河北省建设厅《关于印发<2006年度省工程建 设标准和标准设计第一批编制计划>的通知》(冀建质[2006] 046号)，由唐山市建设工程质量监督检测站会同有关单位共同编 制完成的。 本规程在编制过程中，编制组进行了广泛的调查研究，总结 了河北省市政基础设施工程施工质量验收的实践经验，坚持了 “验评分离、强化验收、完善手段、过程控制”的指导思想，经河 北省建设厅组织审查定稿。 本规程主要包括总则、术语、基本规定、施工测量、土石方 工程、土建工程、室外燃气管道安装、燃气调压装置安装、室内 燃气管道安装、燃气场站、燃气仪表安装、绝缘防腐与保温、功 能性试验等施工质量验收的主要内容。另附5个附录，主要是施工 现场质量检查和验收时经常用到的表格等内容。 本规程应与(市政基础设施工程施工质量验收统一标准》 (DB13(J)53-2005)和《市政基础设施工程施工质量验收通用 规程》(DB13(J)54-2005)配合使用。本规程适用于河北省辖区内的新建、改建、扩建的城镇燃 气管道及设备安装工程。有特殊要求的城镇燃气管道及设备安装 工程，除特殊要求部分外，仍应按本规程执行。 注:城镇燃气包括天然气、人工煤气、液化石油气。

Regulations for acceptance of construction quality of urban gas pipelines and equipment installation projects

CJ/T 222-2006 家用燃气燃烧器具合格评定程序及检验规则

本标准规定了使用城镇燃气的家用燃气燃烧器具及其相关部件的第一方检验、第二方检验、第三方检验的检验程序、抽样方案、检验项目及合格评定程序。 本标准适用于城镇燃气燃烧器具及其相关部件的合格评定程序及检验。

Quality assessment procedures and test rules for gas-burning appliances for domestic use

ASHRAE QC-06-054-2006 地下送气充气的测试与建模

Testing and Modeling of Underfloor Air Supply Plenums

Testing and Modeling of Underfloor Air Supply Plenums