P48 通风、空调工程 标准查询与下载

ANSI/ASHRAE 62.2 Addendum i-2011 低层住宅通风和合格室内空气质量

Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings

ANSI/ACCA 1Manual D-2011 住宅风道系统设计(勘误表)

Residential Duct System Design (Errata)

ANSI/ASHRAE 62.2 Addendum g-2011 低层住宅建筑物的通风设备和可接受的室内空气质量

Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings

ASTM D5032-11 用甘油水溶液法保持恒定相对湿度的标准操作规程

Controlled relative humidity environments are important for conditioning materials for shelf-life studies or for investigating the change in physical or dielectric properties after exposure. The use of aqueous-glycerin solutions reduces the possibility of contamination of the materials or corrosion of electrode systems which would be more likely to result from saturated salt or acid water solutions. Applicable material specifications should state the exposure conditions, including time, temperature and relative humidity that a material should be subjected to before subsequent testing. Typical conditions are given in Practice D618 or D6054.1.1 This practice describes a method for obtaining constant relative humidity ranging from 30 to 98 % at temperatures ranging from 0 to 70°C in relatively small containers by means of an aqueous glycerin solution. 1.2 This practice is applicable for closed systems such as environmental conditioning containers. 1.3 This practice is not recommended for the generation of continuous (flowing) streams of constant humidity unless precautionary criteria are followed to ensure source stability. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions

ANSI/ASHRAE 62.1 Addendum e-2011 合格室内空气质量用通风系统

Ventilation for Acceptable Indoor Air Quality

ANSI/ASHRAE 62.2 Addendum b-2011 低层住宅建筑物的通风设备和可接受的室内空气质量

Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings

ANSI/ASHRAE 62.2 Addendum l-2011 低层住宅通风和合格室内空气质量

Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings

ANSI/ASHRAE 145.2P-2011 气相空气净化系统的性能评估用实验室试验方法:空气净化装置

This proposed standard provides a laboratory test method for assessing the performance of air cleaning devices used in gas-phase air cleaning systems. The test method is for filters and complete devices designed to be used for in-duct gaseous contaminant air cleaning in their commercial form at full-scale. These gaseous contaminant air cleaning devices are those most often selected for use in building HVAC systems.The results can provide useful information for the design and selection of air cleaning systems for controlling indoor concentrations of gaseous air contaminants.

Laboratory Test Method for Assessing the Performance of Gas-Phase Air Cleaning Systems: Air Cleaning Devices

ANSI/NFPA 90B-2011 热风供暖和空调系统的安装标准

1.1* Scope. This standard shall cover construction, installation, operation, and maintenance of systems for warm air heating and air conditioning, including filters, ducts, and related equipment to protect life and property from fire, smoke, and gases resulting from fire or from conditions having manifestations similar to fire.

Standard for the Installation of Warm Air Heating and Air-Conditioning Systems

JG/T 295-2010 空调变风量末端装置

本标准规定了空调变风量末端装置的术语和定义、分类和标记、要求、试验方法、检验规则、标志、包装、运输、贮存等。 本标准适用于安装在空调风管系统中、对空气流量进行分配和对室内空气参数控制的空调末端设备，不适用于安装在空调管道系统进、出房间位置的固定叶片空气分布器、风口末端设备。

Air conditioning variable air volume terminal device

DIN EN 13141-2:2010 建筑物通风.住宅通风用部件/产品的性能检验.第2部分:排气和供气终端装置;德文版本EN 13141-2-2010

Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices; German version EN 13141-2:2010

BS EN 15650:2010 建筑通风.防火挡板

This European Standard applies to fire dampers that are to be used in conjunction with fire separating elements to maintain fire compartments. This standard specifies requirements and gives reference to the test methods defined for fire dampers, which are intended to be installed in Heating, Ventilating and Air Conditioning (HVAC) installations in buildings. All fire dampers close automatically in response to raised temperatures indicating fire. Details are given for the provision of evaluation of conformity and marking of fire dampers. To avoid duplication reference is made to a variety of other standards. To this end it is advised to read this standard in conjunction with EN 1366-2 and EN 1363-1 for details of the fire resistance testing and EN 13501-3 for classification. Fire dampers meeting requirements of this standard may be considered suitable for both ducted and unducted applications. This standard has not considered in detail the detrimental and/or corrosive effects that may be caused by chemical processes present in the atmosphere, which are drawn through the system intentionally or inadvertently and therefore does not apply to fire dampers used in such applications. An indication of salt spray corrosion may be determined using the method described in Annex B.

Ventilation for buildings - Fire dampers

JGJ 174-2010 多联机空调系统工程技术规程

本规程适用于在新建、改建、扩建的工业与民用建筑中,以变制冷剂流量多联分体式空调机组为主要冷热源的空调工程的设计、施工及验收。

Technical specification for multi-connected split air condition system

ANSI/AIHA Z9.5-2010 实验室通风标准

This standard sets forth the requirements for the design and operation of laboratory ventilation systems. This standard does not apply to the following types of laboratories or hoods except as it may relate to general laboratory ventilation: Animal facilities; Biological safety cabinets; Explosives laboratories; High containment facilities (BL3 and BL4 facilities); Laminar flow hoods (e.g., a clean bench for product protection, not employee protection); Radioisotope laboratories;

Laboratory Ventilation Standard

ANSI/ASHRAE 62.1-2010 可接受室内空气质量的通风

Last Final Action 5/16/1991

Ventilation for Acceptable Indoor Air Quality

ANSI/ASHRAE 62.1 Addendum o-2010 可接受室内空气质量的通风

Ventilation for Acceptable Indoor Air Quality

ANSI/ASHRAE 62.1 Addendum b-2010 可接受的室内空气质量通风

Ventilation for Acceptable Indoor Air Quality

ANSI/SPRI RP-14-2010 促植物生长的屋顶系统的通风设计标准

This standard provides a method of designing wind uplift resistance of vegetative roofing systems. It is intended to provide a minimum design and installation reference for those individuals who design, specify, and install vegetative roofing systems. It shall be used in conjunction with, or enhanced by, the installation specifications and requirements of the manufacturer of the specific products used in the Vegetative Roofing System.

Wind Design Standard for Vegetative Roofing Systems

ANSI/AMCA 99-2010 标准手册

AMCA Standard 99 is a collection of standardized terminology and definitions for the air movement and air control industry. Topics include the Fan Laws, vocabulary and definitions, conversions between SI and I-P units, drive arrangements, fan classes, spark resistant construction, and general fan construction.

Standards Handbook

ANSI/ASHRAE 62.1 Addendum m-2010 可接受的室内空气质量通风

Ventilation for Acceptable Indoor Air Quality