P67 港口与航道工程 标准查询与下载

JTJ/T 204-1996 航道工程基本术语标准

为统一航道工程的基本术语及其释义，实现专业术语的标准化，制订本标准。 本标准适用于航道工程及航道维护、管理等方面。

The Standard of Basic Technical Terms for Waterway Engineering

JTJ 296-1996 港口道路、堆场铺面设计与施工规范

Technical Code of Road and Stockyard Pavement for the Port Area

JTJ/T 341-1996 海岸电台总体及工艺设计规范

为于提高承担国际、国内遇险和安全通信以及水上公众通信业务的海岸电台的设计水平、确保工程质量和加速实现水运通信现代化，制定本规范。 本规范适用于海岸电台的新建、扩建和改建工程总体设计和工艺设计。江岸电台和专用电台的工程总体设计和工艺设计，可参照执行。

Code for Design of General Planning and Technology for Coast Stations

JTJ 269-1996 水运工程混凝土质量控制标准

Quality Contro1 Specifications for Concrete of Port and Waterway Engineering

JTJ 268-1996 水运工程混凝土施工规范

为了在水运工程混凝土施工和生产过程中，做到技术先进、经济合理、确保工程质量，制订本规范。 本规范适用于水运工程永久性水工建筑物所用的素混凝土、钢筋混凝土、预应力混凝土的施工。其中通航与修造船厂工程可参照执行。

Specifications for Concrete Construction of Port and Waterway Engineering

JT/T 248-1995 港口供电技术规范

Port Power Supply Technical Specifications

DIN 19703:1995 内河航道船闸.尺寸和装备原理

This document refers to massive locks for waterways for inland navigation.

Locks for waterways for inland navigation - Principles for dimensioning and equipment

JTJ 244-1995 港口设备安装工程质量检验评定标准

Standard of Quality Inspection and Assessment for Port Equipment Installation Construction

NF J39-030:1994 船桥楼布局和有关设备.要求和导则

Ship'S bridge layout and associated equipment. Requirements and guidelines.

BS 6349-4:1994 海上建筑.第4部分:护舷系统和系泊系统设计惯例

Maritime structures - Code of practice for design of fendering and mooring systems

JTJ 231-1994 港口工程环境保护设计规范

为贯彻执行《中华人民共和国环境保护法》，统一港口工程环境保护设计标准，防止污染，改善和保护环境，特制定本规范。 本规范适用于海港、河港的新建、改建、扩建和技术改造项目的环境保护设计厂、矿及其他专用码头的环境保护设计可参照执行。

The Design Code of Environment Protection for Port Engineering

JTJ 287-1994 内河航道维护技术规范

为统一内河航道维护的技术标准和要求，提高内河航道维护的工作质量和技术水平，制定本规范。 本规范适用于天然河流及其潮汐河口、湖泊、水库、人工运河的航道维护。国境河流的航道维护，除另有规定者外，也可参照执行。

Technical Code of Inland Waterway Maintenance

JGJ 86-1992 港口客运站建筑设计规范

Code for design of port passenger transport station buildings

BS 6349-7:1991 海上建筑.第7部分:防波堤设计和施工导则

This Part of BS 6349 provides guidance on the design and construction of breakwaters. Breakwaters are structures which provide protection to harbours and structures such as sea intakes against wave action and this Part of BS 6349 gives guidance on the main types of breakwater. Floating breakwaters are not included. Coastal structures such as groynes, revetments and training walls are not covered, although certain aspects of design may be found to be relevant to them. NOTE The titles of the publications referred to in this British Standard are listed on the inside back cover. The numbers in square brackets used throughout the text relate to the bibliographic references given in Appendix A.

Maritime structures - Guide to the design and construction of breakwaters

BS 6349-5:1991 海工建筑物.疏浚和土地填筑的实施规程

Principally for use in dredging operations involving floating plant but many of the recommendations have application to the use of plant operated from the land.

Maritime structures - Code of practice for dredging and land reclamation

BS 6349-6:1989 海上建筑.第6部分:沿海停泊所和浮动建筑设计

Includes information on wave, wind and current loads.

Maritime structures - Design of inshore moorings and floating structures

BS 6349-3:1988 海上建筑.第3部分:干船坞、闸、滑台以及造船用船台、船吊及船坞与闸门设计

Recommendations and guidance related to the support and movement of ships during their construction and repair.

Maritime structures - Design of dry docks, locks, slipways and shipbuilding berths, shiplifts and dock and lock gates

BS 6349-2:1988 海上建筑.第2部分:试验.试验Ea指南:冲击码头围墙突堤及系船柱的设计

Includes guidance on the design of roll-on/roll-off berths.

Maritime structures - Design of quay walls, jetties and dolphins

JTJ 237-1994 水运工程导标设计规范

Designing Specification for Leading Marks of Waterway Engineering

JTJ 252-1987 干船坞水工结构设计规范

Code for design of hydraulic structures of dry docks