P76 通信工程 标准查询与下载

YD/T 5164-2009 电信客服呼叫中心工程验收规范

本规范是电信客服呼叫中心设备安装工程进行施工质量检查、阶段验收以及竣工验收等工作的主要依据，适用于新建工程。改、扩建工程可参照执行。

Acceptance Specification for Call Center Engineering

YD 5039-2009 通信工程建设环境保护技术暂行规定

本暂行规定适用于新建通信工程建设项目，改建、扩建项目可参照执行。 通信工程建设项目除应执行本规定外，还应符合相关国家标准和规范的要求。

Provisional Specifications on Enironment Protection for Engineering Construction of Telecommunications

YD/T 5168-2009 移动WAP网关工程设计规范

本规范适用于移动WAP网关新建工程设计，改扩建工程设计在合理利用原有设施的基础上参照本规范执行。

Specification of Engineering Design for Mobile WAP Gateway

YD 5178-2009 通信管道人孔和手孔图集

本图集是通信管道工程建设的人孔和手孔专业图集。 本图集包括标准系列的砖砌人孔和手孔、混凝土砌块人孔及配件等。 本图集适用于新建通信管道工程。改、扩建通信管道工程应根据当地材料供应情况和施工现场条件、环境、市政要求等情况，执行本图集相关规定。 人孔和手孔上覆的荷载能力是依据其设置地点可能出现的最大荷载等因素确定的，其上覆所安装的口圈负荷强度，应与上覆荷载能力配套。即口圈的载荷能力必须大于或等于上覆荷载能力。 凡人孔和手孔超出本图集规定的尺寸和使用条件时，其基础、墙体、上覆结构应另行计算。 本图集中人孔图、于孔图及配件图等规格尺寸单位均为毫米。

Volume Drawing of Manhole and Handhole for Communication Conduit Engineering

YD/T 5163-2009 电信客服呼叫中心工程设计规范

本规范适用于电信客服呼叫中心新建工程设计，改、扩建工程在合理利用原有设施的基础上可参照执行。

Specification of Engineering Design for Call Center

YD/T 5169-2009 移动WAP网关工程验收规范

本规范是移动WAP网关工程施工质量检验、随工检验和竣工验收等工作的依据，适用于移动WAP网关新建工程。改、扩建工程可参照执行。

Acceptance Specification for Mobile WAP Gateway Engineering

BS EN 61158-5-20:2008 工业通信网络.现场总线规范.应用层服务定义.20型元件

The fieldbus Application Layer (FAL) provides user programs with a means to access the fieldbus communication environment. In this respect, the FAL can be viewed as a “window between corresponding application programs.” This part of IEC 61158 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 20 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This standard defines in an abstract way the externally visible service provided by the different Types of the fieldbus Application Layer in terms of a) an abstract model for defining application resources (objects) capable of being manipulated by users via the use of the FAL service, b) the primitive actions and events of the service; c) the parameters associated with each primitive action and event, and the form which they take; and d) the interrelationship between these actions and events, and their valid sequences. The purpose of this standard is to define the services provided to 1) the FAL user at the boundary between the user and the Application Layer of the Fieldbus Reference Model, and 2) Systems Management at the boundary between the Application Layer and Systems Management of the Fieldbus Reference Model. This standard specifies the structure and services of the IEC fieldbus Application Layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498) and the OSI Application Layer Structure (ISO/IEC 9545). FAL services and protocols are provided by FAL application-entities (AE) contained within the application processes. The FAL AE is composed of a set of object-oriented Application Service Elements (ASEs) and a Layer Management Entity (LME) that manages the AE. The ASEs provide communication services that operate on a set of related application process object (APO) classes. One of the FAL ASEs is a management ASE that provides a common set of services for the management of the instances of FAL classes. Although these services specify, from the perspective of applications, how request and responses are issued and delivered, they do not include a specification of what the requesting and responding applications are to do with them. That is, the behavioral aspects of the applications are not specified; only a definition of what requests and responses they can send/receive is specified. This permits greater flexibility to the FAL users in standardizing such object behavior. In addition to these services, some supporting services are also defined in this standard to provide access to the FAL to control certain aspects of its operation.

Industrial communication networks — Fieldbus specifications — Part 5-20: Application layer service definition — Type 20 elements

BS EN 61158-5-14:2008 工业通信网络.现场总线规范.应用层服务定义.14型元件

The fieldbus application layer (FAL) provides user programs with a means to access the fieldbus communication environment. In this respect, the FAL can be viewed as a “window between corresponding application programs.” This standard provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 14 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This standard defines in an abstract way the externally visible service provided by the Type 14 fieldbus application layer in terms of a) an abstract model for defining application resources (objects) capable of being manipulated by users via the use of the FAL service, b) the primitive actions and events of the service; c) the parameters associated with each primitive action and event, and the form which they take; and d) the interrelationship between these actions and events, and their valid sequences. The purpose of this standard is to define the services provided to 1) the FAL user at the boundary between the user and the application layer of the fieldbus reference model, and 2) Systems Management at the boundary between the application layer and Systems Management of the fieldbus reference model. This standard specifies the structure and services of the Type 14 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498) and the OSI application layer structure (ISO/IEC 9545). FAL services and protocols are provided by FAL application-entities (AE) contained within the application processes. The FAL AE is composed of a set of object-oriented application service elements (ASEs) and a layer management entity (LME) that manages the AE. The ASEs provide communication services that operate on a set of related application process object (APO) classes. One of the FAL ASEs is a management ASE that provides a common set of services for the management of the instances of FAL classes. Although these services specify, from the perspective of applications, how request and responses are issued and delivered, they do not include a specification of what the requesting and responding applications are to do with them. That is, the behavioral aspects of the applications are not specified; only a definition of what requests and responses they can send/receive is specified. This permits greater flexibility to the FAL users in standardizing such object behavior. In addition to these services, some supporting services are also defined in this standard to provide access to the FAL to control certain aspects of its operation.

Industrial communication networks — Fieldbus specifications — Part 5-14: Application layer service definition — Type 14 elements

BS EN 61158-5-19:2008 工业通信网络.现场总线规范.应用层服务定义.19型元件

The fieldbus application layer (FAL) provides user programs with a means to access the fieldbus communication environment. In this respect, the FAL can be viewed as a “window between corresponding application programs.” This standard provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 19 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This standard defines in an abstract way the externally visible service provided by the fieldbus application layer in terms of a) an abstract model for defining application resources (objects) capable of being manipulated by users via the use of the FAL service, b) the primitive actions and events of the service; c) the parameters associated with each primitive action and event, and the form which they take; and d) the interrelationship between these actions and events, and their valid sequences. The purpose of this standard is to define the services provided to 1) the FAL user at the boundary between the user and the application layer of the fieldbus reference model, and 2) Systems Management at the boundary between the application layer and Systems Management of the fieldbus reference model. This standard specifies the structure and services of the fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498) and the OSI application layer structure (ISO/IEC 9545). FAL services and protocols are provided by FAL application-entities (AE) contained within the application processes. The FAL AE is composed of a set of object-oriented application service elements (ASEs) and a layer management entity (LME) that manages the AE. The ASEs provide communication services that operate on a set of related application process object (APO) classes. One of the FAL ASEs is a management ASE that provides a common set of services for the management of the instances of FAL classes. Although these services specify, from the perspective of applications, how request and responses are issued and delivered, they do not include a specification of what the requesting and responding applications are to do with them. That is, the behavioral aspects of the applications are not specified; only a definition of what requests and responses they can send/receive is specified. This permits greater flexibility to the FAL users in standardizing such object behavior. In addition to these services, some supporting services are also defined in this standard to provide access to the FAL to control certain aspects of its operation.

Industrial communication networks — Fieldbus specifications — Part 5-19: Application layer service definition — Type 19 elements

BS EN 61158-5-16:2008 工业通信网络.现场总线规范.应用层服务定义.16型元件

The fieldbus application layer (FAL) provides user programs with a means to access the fieldbus communication environment. In this respect, the FAL can be viewed as a “window between corresponding application programs.” This standard provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 16 fieldbus. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This standard defines in an abstract way the externally visible service provided by the fieldbus application layer in terms of a) an abstract model for defining application resources (objects) capable of being manipulated by users via the use of the FAL service, b) the primitive actions and events of the service; c) the parameters associated with each primitive action and event, and the form which they take; and d) the interrelationship between these actions and events, and their valid sequences. The purpose of this standard is to define the services provided to 1) the FAL user at the boundary between the user and the application layer of the fieldbus reference model, and 2) Systems Management at the boundary between the application layer and Systems Management of the fieldbus reference model. This standard specifies the structure and services of the fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498) and the OSI application layer structure (ISO/IEC 9545). FAL services and protocols are provided by FAL application-entities (AE) contained within the application processes. The FAL AE is composed of a set of object-oriented application service elements (ASEs) and a layer management entity (LME) that manages the AE. The ASEs provide communication services that operate on a set of related application process object (APO) classes. One of the FAL ASEs is a management ASE that provides a common set of services for the management of the instances of FAL classes. Although these services specify, from the perspective of applications, how request and responses are issued and delivered, they do not include a specification of what the requesting and responding applications are to do with them. That is, the behavioral aspects of the applications are not specified; only a definition of what requests and responses they can send/receive is specified. This permits greater flexibility to the FAL users in standardizing such object behavior. In addition to these services, some supporting services are also defined in this standard to provide access to the FAL to control certain aspects of its operation.

Industrial communication networks - Fieldbus specifications - Part 5-16: Application layer service definition - Type 16 elements

YD 5111-2009 2GHz WCDMA 数字蜂窝移动通信网工程设计暂行规定

本暂行规定适用于2GHz WCDMA数字蜂窝移动通信网的工程设计，其他移动通信网的工程设计可参照执行，其网络组织、使用频段等按相关规定执行。

Temporary Specification of Engineering Design for 2GHz WCDMA Digital Cellular Mobile Communication System

YD/T 5172-2009 800MHz/2GHz CDMA2000 数字蜂窝移动通信网工程验收暂行规定

本暂行规定是800MHz/2GHz CDMA2000数字蜂窝移动通信安装工程的施工质量检查、随工检验和交工验收的技术依据，适用于新建800MHz/2GHz CDMA2000数字移动通信设备安装工程。扩建和改建工程参照执行。

Provisional Specification on Engineering Acceptance for 800MHz/2GHz CDMA2000 Digital Cellular Mobile Communication System

YD/T 5173-2009 2GHz WCDMA 数字蜂窝移动通信网工程验收暂行规定

本暂行规定是2GHz WCDMA数字移动通信安装工程的施工质量检查、随工检验和交工验收的技术依据，适用于新建2GHz WCDMA数字移动通信设备安装工程。扩建和改建工程参照执行。

Provisional Specification on Engineering Acceptance for 2 GHz WCDMA Digital Cellular Mobile Communication System

YD 5110-2009 800MHz/2GHz CDMA2000 数字蜂窝移动通信网工程设计暂行规定

本暂行规定适用于800MHz/2GHz CDMA2000数字蜂窝移动通信网的工程设计，适用于1x、EV-DO建网设计，其网络组织、使用频段等按相关规定执行。窄带CDMA移动通信网的工程设计可参照执行。

Temporary Specifications of Engineering Design for 800MHz/2GHz cdma2000 Digital Cellular Mobile Communication System

ANSI/TIA-568-C.1-2009 商业建筑远程通信电缆布线标准

This Standard specifies minimum requirements for telecommunications cabling within a commercial building and between buildings in a campus environment. It specifies cabling requirements, cabling distances, telecommunications outlet/connector configurations, and a recommended topology.

Commercial Building Telecommunications Cabling Standard

ANSI/ATIS 0600336-2009 通用电信框架用工程要求

Engineering Requirements for a Universal Telecom Framework

ANSI/TIA-568-C.0-2009 消费者房屋用通用远程通信电缆布线

This Standard specifies minimum requirements for generic telecommunications cabling. It specifies cabling requirements such as cabling distances, configurations, and topologies.

Generic Telecommunications Cabling for Customer Premises

DB21/T 1712.1-2008 信息化工程监理实施方法 第1部分 通用布缆系统工程监理实施方法

Implementation method of informatization project supervision Part 1 General cable distribution system engineering supervision implementation method

DB21/T 1712.3-2008 信息化工程监理实施方法 第3部分 计算机网络系统工程监理实施方法

Implementation method of information engineering supervision part 3 Implementation method of computer network system engineering supervision

DB21/T 1712.2-2008 信息化工程监理实施方法 第2部分 电子设备机房系统工程监理实施方法

Implementation method of informatization engineering supervision Part 2 Implementation method of electronic equipment computer room system engineering supervision