P96 作业设备与仪器仪表 标准查询与下载

GOST R 51922-2002 平板夯的一般规范

Plate compactor. General specifications

KS F 8001-2001 钢管支架

이 규격은 콘크리트 공사의 거푸집 받침 기둥 등으로 사용하는 강제 파이프 서포트에 규정한다

Steel pipe supports

JGJ 130-2001 建筑施工扣件式钢管脚手架.安全技术规范

Technical code for safety of steel tubular scaffold with couplers in construction

ASTM F1437-01 倾斜的货运槽罐梯子标准规程

1.1 This practice provides design, construction, and installation criteria for inclined ladders to be installed within cargo tanks. 1.2 Where ladders are attached to platforms, see Figs. 1 and 2. 1.3 Values stated in SI units are to be regarded as the standard. The values stated in parentheses are provided for information purposes only.

Standard Practice for Inclined Cargo Tank Ladders

JIS A 8110:2000 土方机械.检修维护仪器

この規格は，作業現場で土工機械を点検するための診断用計測器具のリストをガィダンスとして規定する。この規格の主な目的は，携帯用器具を使用して容易に機械の点検ができるように，近づきやすく，器共が取りつけやすい土工機械が設計されるためのものである。備考1.機械の大分解作業のときに使用するサービス用器具又は整備工場での使用が適切な器具は，この規格では規定しない。備考2.診断点検は，熱練者によって実施することとし，関係諸仕様及び説明事項は，オペレータマニュアルよりもサービスマニュアルに記載することが望ましい。 この規格はクローラ式及びホィール式のトラクタ，クローラ式及びホイール式のローダ及び?由圧ショべルに適用する。なお，グレーダ，自走式スクレーパダンプトラックなどの基本的土工機械についても適用することができる。

Earth-moving machinery -- Service instrumentation

BS EN 12418:2000+A1:2009 施工现场用砖石和石材切割机.安全性

This European Standard applies to transportable masonry and stone cutting-off machines stationary during work, principally used on job site building construction for cutting-off stones, other mineral construction materials and composite materials having at least one supporting surface. The power for the tool rotation is supplied by electrical or internal combustion prime motor. This European Standard deals with all significant hazards pertinent to masonry and stone cutting-off machines for job site (see clause 4), when they are used as intended and under the conditions foreseen by the manufacturer. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. These machines are designed for use with rotating diamond cutting-off wheels with a continuous rim and/or segmented rim. This European Standard does not apply to: -metal cutting-off machines; -wood and timber sawing machines; -machines with a feed or descent mechanism other than manual, or with a pedal; -mobile machines on a trolley travelling on the ground; -hand-held portable grinding and cutting-off machines; -hand-held portable grinding and cutting-off machines mounted on a support to be used in a fixed position. This European Standard does not cover the operation of transportable masonry and stone cutting-off machines in potential explosive atmospheres. This European Standard covers electrical hazards making reference to relevant European Standards (see 5.2). Those hazards that are relevant for all mechanical, electrical, hydraulic, pneumatic and other equipment of machinery and that are dealt with in standards for common use are not covered by this European Standard. Reference to pertinent standards of this kind is made where such standards are applicable and so far necessary. In this standard, the masonry and stone cutting-off machines for job site construction are called: "cutting-off machines" or "machines", and cutting-off wheels are also called: "tools“. This standard applies primarily to the machines which are manufactured after the date of approval of the standard by CEN.

Masonry and stone cutting-off machines for job site - Safety

EN 12050-3:2000 建筑物和施工地点的废水提升装置 制造和试验原理 第3部分 限制使用的含粪便废水提升装置

This part of this European Standard applies to lifting plants for wastewater containing faecal matter for limited applications used for draining a single WC according to EN 33 or EN 37 to which it is directly connected and located below flood level. Plants for limited applications are those where the number of users is small, where there is another WC available above flood level, and the plants serve no more than one wash-hand basin, one shower and one bidet provided they pass the tests described in clause 8 and they are installed in accordance with EN 12056-1 and no other sanitary appliance is directly or indirectly connected. In addition, limited application means that the plant is located in the same room as the WC and any other appliance served by it'). This part of this standard contains general requirements, basic construction and testing principles, together with information on materials and conformity evaluation. Construction and testing requirements for non-return valves used in faecal lifting plants for limited applications are given in EN 12050-4.

Wastewater Lifting Plants for Buildings and Sites - Principles of Construction and Testing - Part 3: Lifting Plants for Wastewater Containing Faecal Matter for Limited Applications

BS 7955:1999 施工作业用安全防护网和薄板.性能和试验方法规范

This British Standard specifies requirements and test methods for containment nets and sheets intended for use on construction works. It covers flame retardant and non-flame retardant containment nets and sheets. It also specifies test methods and performance specifications for ties used in conjunction with nets and sheets. It does not cover safety nets, barrier nets or temporary roofs. It does not cover installation and use. This British Standard does not specify ageing requirements.

Containment nets and sheets on construction works - Specification for performance and test methods

BS EN 1065:1999 可调节的套筒式钢支架.产品规范、设计和通过计算和试验进行的评估

This European Standard specifies materials, design requirements, corrosion protection alternatives together with assessment methods using both calculations and testing for open thread and covered thread adjustable telescopic steel props which are intended for use on construction sites (see Figure 1). It specifies five classes of nominal characteristic strengths for adjustable telescopic steel props each having a series of maximum extended lengths. Each having differing endplate configuration. This European Standard does not apply to adjustable props of different materials or construction, nor does it provide any information concerning the use of adjustable steel props.

Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests

DIN 18799-2:1999 建筑工程用爬梯.第2部分:带一根支柱的爬梯.安全性要求和试验

Ladders for construction works - Part 2: Ladders with one upright; safety requirements and tests

DIN 18799-3:1999 建筑工程用爬梯.第3部分:烟囱用爬梯.安全性要求和试验

The document applies for the design of stationary ladders made of metal for chimneys according to DIN 1056 and DIN 4133. It specifies definitions, dimensions and safety requirements.#,,#

Ladders for construction works - Part 3: Ladders for chimneys; safety requirements and tests

DIN 18799-1:1999 建筑工程用爬梯.第1部分:带两根支柱的爬梯.安全性要求和试验

Ladders for construction works - Part 1: Ladders with two uprights; safety requirements and tests

JG 3061-1999 钢板冲压扣件

本标准规定了钢板冲压扣件的分类、技术要求、试验方法、检验规则、标志、包装、运输及储存。 本标准适用于建筑工程中外径为48mm和42mm钢管脚手架、井架、模板支撑等使用的扣件，也适用于市政、水利、化工、冶金、煤炭和船舶等工程中使用的扣件。

Steel plate punched couplers

JG/T 30-1999 土方机械.自卸汽车车厢.容量标定

本标准规定了各种卸料方式的自卸汽车车厢装运典型物料的近似容f的标定方法。该容t是以车厢内部尺寸和车厢上部装料体积为基础。 本标准统一规定了对自卸汽车车厢容t进行比较的标定方法，不用来确定在某一具体使用中的实际容量。 本标准适用于各种卸料方式的自卸汽车车厢容量的标定。

Earth-moving machinery.Dumper bodies.Volumetric rating

JG 13-1999 门式钢管脚手架

木标准规定了门式钢管脚手架的品种、规格、结构型式、技术要求、试验方法、检验规则和产品标志、包装、运输及贮存的细则。 本标准适用于土木建筑工程中内、外脚手和混凝土模板的支架等。

Tubular steel frame scaffolding

JG/T 31-1999 土方机械.操作用仪表

本标准规定了自行式土方机械所需的仪表及其配置、布置和颜色。 本标准适用于GB 8498中规定的土方机械。

Earth-moving machinery.Operating instrumentation

JG/T 78-1999 电动外部混凝土器震动性能试验方法

本标准适用于电动平板式混凝土振动器、电动附着式混凝土振动器、电动台架式混凝土振动器。

Test method of vibration performance of electric concrete vibrators

JG/T 19-1999 层流洁净工作台检验标准

本标准主要适用于层流洁净工作台。其他局部净化设备可参照本标准进行检验。

Test standard for laminar clean bench

JG/T 28-1999 升运式铲运机铲斗容量标定

本标准适用于升运式铲运机的铲斗容量标定。 本标准规定了升运式铲运机装载普通土壤时铲斗容量的标定方法，为了对铲斗容量大小进行统一计算和比较，而不是规定在某一具体使用条件下铲斗的实际容量。

Elevating scrapers.Volumetrie rating

JG/T 40-1999 潜水电动振冲器 技术条件

本标准规定了潜水电动振冲器的主要性能要求以及制造、外观、包装、运输检验要求，并对这些要求作出了合理的分等。 本标准适用于加固软弱地基或捣实砂性地基的潜水电动振冲器。

Electric submersible vibroimpactor-Technical conditions