P96 作业设备与仪器仪表 标准查询与下载

SANS 550-3:2005 木制梯子．第3部分：三角梯和伸缩三角梯

Covers specific requirements for trestle and extension trestle ladders.

Wooden ladders Part 3: Trestle and extension trestle ladders

DIN EN 14653-2:2005 土方工程支撑用手动液压支撑系统.第2部分:通过计算或试验评定

The standard specifies methods of calculation and test to assess conformity with EN 14653-1

Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test; German version EN 14653-2:2005

DIN EN 14653-1:2005 土方工程支撑用手动液压支撑系统.第1部分:产品规范

The standard specifies the constructional requirements for hydraulically supported trench lining systems. It also specifies the structural requirements.

Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications; German version EN 14653-1:2005

NF P93-510:2005 预制部件制的移动通道和工作塔.材料、尺寸、设计载荷、安全和性能要求

Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements.

BS 8437:2005+A1:2012 工作场所使用的人员防跌落系统和设备的选择、使用和维护的实施规程

Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace

BS 8437:2005 工作场所使用的人员防跌落系统和设备的选择、使用和维护的实施规范

This British Standard gives recommendations and guidance on the selection, use and maintenance of personal fall protection systems and equipment for use in the workplace to prevent and/or to arrest falls from a height, including systems and equipment suitable for use in rescue. It also gives guidance on rescue of persons working at a height, in the event of an accident. It is intended for use by employers, employees and self-employed persons who use personal fall protection systems and equipment. It is also intended for use by designers, e.g. architects and structural engineers, including those who are responsible for the design of safe access routes on buildings and structures, by those who commission work at a height, e.g. building owners and contractors, and by those involved in training persons for work at a height. The standard is not applicable to collective fall protection systems, for example work platforms and fall arrest nets. It is not intended to apply to personal fall protection systems and equipment for use in leisure activities or in professional or private sports activities. It is also not intended to apply to personal fall protection systems and equipment for use in arboriculture. NOTE 1 A discussion of the basic principles of fall protection is given in Annex A. NOTE 2 Recommendations and guidance on the use of rope access methods are given in BS 7985.

Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace

BS 4211:2005+A1:2008 永久性固定梯子用规范

This British Standard specifies requirements for ladders with single bar rungs intended to be fixed permanently to structures, including high structures such as chimneys, silos and bins, to provide means of access. Requirements for associated platforms and safety hoops are also given.This standard also covers permanently fixed companionway ladders.

Specification for permanently fixed ladders

SANS 10085-1:2004 脚手架的设计，搭建，使用和检验．第1部分：钢制脚手架

Covers steel access scaffolding commonly used for supporting workers and materials, plant or equipment during construction, maintenance and demolition work.

The design, erection, use and inspection of access scaffolding Part 1: Steel access scaffolding

BS EN 12812:2004 脚手架.性能要求和总体设计

This European Standard specifies performance requirements and limit state design methods for two design classes of falsework. It sets out the rules that a designer has to take into account to produce a safe falsework structure. It also provides information for the person who requires falsework to support a "permanent structure" and who needs to commission its design or supply. This European Standard also gives information on foundations. This European Standard does not specify requirements for formwork, although formwork may be a part of the falsework construction. Nor does it provide information on access and working scaffolds, which is given in EN 12811-1:2003. This European Standard does not provide information about site activities. It does not provide information about the use of some standardized products, including beams conforming to EN 13377 and props conforming to EN 1065.

Falsework - Performance requirements and general design

ANSI/UL 1322a-2004 预制脚手架厚板材和阶梯

Fabricated Scaffold Planks and Stages

DIN EN 61478/A1:2004 带电作业.绝缘材料的梯子

Live working - Ladders of insulating material (IEC 61478/A1:2003, modified); German version EN 61478/A1:2003

KS F 8014-2004 支架用钢底座

비계 및 동바리 기둥의 끝면을 지지하여 미끄러짐이나 가라앉는 것을 방지하고 항상 수평

Base plate

KS F 8015-2004 钢制托架

건물 벽 등에 설치하여 상부의 비계를 지지하거나 또는 비계 기둥에 부착하여 작업 발판을

Steel bracket

KS F 8013-2004 夹具

이 규격은 건설 공사 현장에서 비계 또는 동바리 등을 조립, 설치하기 위해 강관과 강관,

Clamping devices

KS F 8016-2004 防护架子

이 규격은 비계 또는 구조물의 외측면에 경사로 설치하여 위에 떨어지는 낙하물로부터 작업

Protection shelves

DIN EN 12813:2004 临时工程设备.预制构件的承载塔.结构设计的特殊要求

This European standard establishes the characteristic resistance Ru of prefabricated load bearing towers with and without horizontal loads, and gives advice on design values. Interpretation of the result of assessments of independant towers should make it possible to evaluate the load bearing capacity where these towers are used in arrangements and combination to be recommended by the manufacturers.#,,#

Temporary works equipment - Load bearing towers of prefabricated components - Particular methods of structural design; German version EN 12813:2004

BS EN 12811-2:2004 临时工作设备.材料信息

This European Standard provides guidance on where to find information on materials often used in temporary works. It draws attention to a number of points that a designer should take into account. The information given is limited to commonly used steel, aluminium alloys, cast iron, timber and timber based materials. Requirements are also given for welding, for limiting corrosion and other deterioration. It is limited to the selection of types and grades of material from standards, which are either international or European Standards.

Temporary works equipment - Information on materials

BS EN 12811-1:2004 临时工作设备.脚手架.性能要求和通用设计

Temporary works equipment - Scaffolds - Performance requirements and general design

BS EN 12810-1:2004 预制组件制正面脚手架.产品规范

BS EN 12810-1-2004

Facade scaffolds made of prefabricated components - Product specifications

BS EN 12810-2:2004 预制组件制正面脚手架.结构设计的特殊方法

Facade scaffolds made of prefabricated components - Particular methods of structural design