P96 作业设备与仪器仪表 标准查询与下载

JG/T 13-1999 门式钢管脚手架

Tubular steel frame scaffolding

JG/T 3055-1999 基桩动测仪

本标准规定了基桩动测仪的分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存等。 本标准适用于采用现行标准JGJ/T 93-1995和JGJ 106-1997 规定的低应变或高应变方法，对工程基桩的桩身结构完整性和单桩竖向承载力(斜桩时为轴向承载力)进行动力检测的测量分析仪器。

Pile dynamic testing instruments

JG 3056-1999 数显式粘结强度检测仪

本标准规定了数显式粘结强度检测仪的技术要求、产品型号、试验方法、检验规则、标志、包装、运输及贮存等。 本标准适用于建筑工程饰面砖粘结强度检测用的数显式粘结强度检测仪。

Digital sticking strength tester

BS EN 1953:1999 涂覆材料的雾化和喷雾设备.安全要求

This European Standard applies to the design and construction of spraying equipment for both manual and automatic application of liquid, paste (semi-solid) and powder coating materials. The manual equipment is hand-held and the automatic equipment is operated by auxiliary signals and mounted either rigidly or onto automated devices such as robots or reciprocating or rotary machines. The coating material may be atomized by air, hydromechanically (airless) with or without air assistance, or mechanically by centrifugal force. With atomization by centrifugal force, the atomized coating material may be assisted towards the workpiece by controlled air veils. The atomizing and spraying equipment may also be electrostatically supported. This standard specifically refers to hazards created by or resulting from the use of atomizing and spraying equipment, if it is used as determined and in accordance with the foreseeable conditions of the manufacturer (see clause 4). Atomizing and spraying equipment may be linked with supply systems, control circuits, spray booths and/or automated machinery, none of which are covered by the scope of this standard. This may result in the overlapping of some hazards or risks. Such hazards or risks should be taken into consideration when specifying and installing atomizing and spraying equipment. Further topics for this standard are minimum user information: —operation manuals; —marking. This standard excludes: —flocking machines; —equipment related to the atomizing and spraying of foodstuffs and Pharmaceuticals; —artists airbrushes; —machinery for the supply and/or circulation of coating materials under pressure; —automated devices such as robots, reciprocating or rotary machines. This standard applies to equipment constructed after the date of issue of this standard.

Atomizing and spraying equipment for coating materials - Safety requirements

NF P93-311-2:1998 安全网.第2部分:安全网装配的安全要求

Safety nets. Part 2 : safety requirements for the erection of safety nets.

UL 1322-1998 装配式脚手架铺板和脚手架

The requirements cover wood, metal, or a combination of wood and metal fabricated planks and stage platforms for use with suspended, fixed, or rolling scaffolds. These requirements also cover modular suspended platforms.

Fabricated scaffold planks and stages

UL 112-1998 便携式木梯

UL Standard for Safety Portable Wood Ladders Eighth Edition; Reprint with Revisions Through and Including 06/28/2001; This Standard Includes Announcement Bulletin Dated 03/02/2001

NF P93-311-1:1997 安全网.第1部分:安全要求.试验方法

Safety nets. Part 1 : safety requirements, test methods.

NF P93-352:1997 施工现场设备. 单个移动平台

Building site equipment. Individual mobil platform.

JG 3043-1997 维勃稠度仪

本标准规定了维勃稠度仪的分类、技术要求、试验方法、检验规则及标志、包装、运输等内容。 本标准适用于用维勃稠度法测定干硬性混凝土稠度的维勃稠度仪。

V-B consistometer

NF P36-302:1997 檐口滴水沟用托架.要求和试验(欧洲标准EN 1462)

BRACKETS FOR EAVES GUTTERS. REQUIREMENTS AND TESTING. (EUROPEAN STANDARD EN 1462).

NF P93-511:1996 移动式入口和工作吊盘.说明书编制规则和指南

Mobile access and working towers. Rules and guidelines for the preparation of an instruction manual.

BS 5975:1996 脚手架实用规程

Gives recommendations for the methods of design, erection and use of temporary structures used to support permanent structures until such time as the latter becomes self-supporting. Provides recommendations on the design of falsework using permissible stress methods and on procedures for the successful management of work on site, including the appointment of a falsework coordinator. BS EN 12812:2004 now exists in parallel with this standard and specifies performance requirements for the design of falsework in accordance with one of three classes: A, B1 and B2. Limit state design methods are specified for design classes B1 and B2. It does not provide guidance for the structural design of Class A. BS EN 12812:2004 does not provide guidance on procedures necessary for the successful management of work on site.

Code of practice for falsework

JG/T 3032-1995 预制混凝土构件钢模板

本标准规定了预制混凝土构件钢模板产品的分类、结构选型，技术要求，检验规则，标志、运输和贮存。 本标准主要适用于工业与民用建筑工程中预制混凝土和预应力混凝土构件的钢模板制造和验收，其它土木工程中类似的钢模板亦可参照本标准的有关条款执行。

Steel formwork for prefabricated concrete products

UL 1776-1995 高压清洗机

High-pressure cleaning machines

JIS A 8651:1995 钢管可调支柱

この規格は，コンクリート工事の支保工(型枠支保工)に使用するパィプサポートについて規定する。

Tubular steel adjustable shores

JIS A 8951:1995 钢管脚手架

この規格は,建築工事に使用する鋼管足場について規定する。

Tubular steel scaffolds

UL 1323-1995 脚手架提升机

Scaffold hoists

NF P93-350:1995 建筑施工现场设备.混凝土作业模板

Building site equipment. Wallforms for concrete.

DIN EN 634-1:1995 混凝土粘结木屑板.规范.第1部分:一般要求

Cement-bonded particleboards - Specifications - Part 1: General requirements; German version EN 634-1:1995