Q31 建筑卫生陶瓷 标准查询与下载
共找到 652 条与 建筑卫生陶瓷 相关的标准，共 44 页
Ceramic tile hardness test method
- ICS
- 91.100.25
- CCS
- Q31
- 发布
- 2019-05-02
- 实施
- 2019-11-01
Ceramic glass ceramic composite brick
- ICS
- 91.100.25
- CCS
- Q31
- 发布
- 2019-05-02
- 实施
- 2019-11-01
Ceramic tiles. Determination of dimensions and surface quality
- ICS
- 91.100.23
- CCS
- Q31
- 发布
- 2018-10-31
- 实施
- 2018-10-31
This document specifies methods for determining the dimensional characteristics (length, width, thickness, straightness of sides, rectangularity, surface flatness) and the surface quality of ceramic tiles. Tiles with areas less than 4 cm2 are excluded from measurements of length, width, straightness of sides, rectangularity and surface flatness. NOTE Spacer lugs and glaze blobs and other irregularities of the sides are intended to be ignored when measuring length, width, straightness of sides, rectangularity, if these are subsequently hidden in the joints after fixing (installation).
Ceramic tiles - Part 2: Determination of dimensions and surface quality
- ICS
- 91.100.23
- CCS
- Q31
- 发布
- 2018-09-00
- 实施
This document defines terms and establishes classifications, characteristics and marking requirements for ceramic tiles of the best commercial quality (first quality). This document is not applicable to tiles made by other than normal processes of extrusion or dry pressing. It is not applicable to decorative accessories or trim such as edges, corners, skirting, capping, coves, beads, steps, curved tiles and other accessory pieces or mosaics (i.e. any piece that can fit into a square, the side of which is less than 7 cm). NOTE listed in this document. ISO 10545 is a multi-part standard, each part describes a specific test procedure or related matter.
Ceramic tiles - Definitions, classification, characteristics and marking
- ICS
- 01.040.91;91.100.23
- CCS
- Q31
- 发布
- 2018-09-00
- 实施
Guidelines for the implementation of safety production risk classification management and control system for enterprises in the building ceramic products manufacturing industry
- ICS
- 81.060.01
- CCS
- Q31
- 发布
- 2018-06-29
- 实施
- 2018-07-29
Guidelines for the implementation of the inspection and management system for hidden dangers of production safety accidents in the building ceramic products manufacturing industry
- ICS
- 81.060.01
- CCS
- Q31
- 发布
- 2018-06-29
- 实施
- 2018-07-29
Ceramic tiles. Determination of water absorption, apparent porosity, apparent relative density and bulk density
- ICS
- 91.100.23
- CCS
- Q31
- 发布
- 2018-04-13
- 实施
- 2018-04-13
This document specifies a method for determining water absorption, apparent porosity, apparent relative density and bulk density of ceramic tiles. This method is applicable to classification of tiles and product specifications.
Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density
- ICS
- 91.100.23;91.100.25
- CCS
- Q31
- 发布
- 2018-02-01
- 实施
本标准规定了坐便器产品工程安装的术语和定义、坐便器产品分类和安装技术要求。 本标准适用于验收合格的一般民用和公共建筑用坐便器的安装。
Technical requirements for the installation of toilets
- ICS
- 91.140.70
- CCS
- Q31
- 发布
- 2017-11-07
- 实施
- 2018-04-01
Nepheline syenite powder (sand)
- ICS
- 81.060.10
- CCS
- Q31
- 发布
- 2017-04-12
- 实施
- 2017-10-01
Ceramic tiles - Part 13: Determination of chemical resistance (ISO 10545-13:2016); German version EN ISO 10545-13:2016
- ICS
- 91.100.23
- CCS
- Q31
- 发布
- 2017-04
- 实施
This European Standard is applicable to the following three types of adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors. This European Standard gives the terminology concerning the products, working methods, application properties, etc, for ceramic tile adhesives. This European Standard specifies the performance requirements for the adhesives for ceramic tiles. It also specifies the appurtenant test methods, assessment and verification of constancy of performance (AVCP), as well as classification, designation and marking of adhesives for ceramic tiles. This European Standard does not provide criteria or recommendations for the design and installation of ceramic tiles. Ceramic tile adhesives may also be used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.
Adhesives for ceramic tiles - Part 1: Requirements@ assessment and verification of constancy of performance@ classification and marking
- ICS
- 83.180;91.100.10
- CCS
- Q31
- 发布
- 2017-02
- 实施
This European Standard specifies the methods for determining characteristics for adhesives used in internal and external installation of ceramic tiles. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. The following test methods are described: - determination of open time (8.1); - determination of slip (8.2); - determination of tensile adhesion strength for cementitious adhesives (8.3); - determination of shear adhesion strength of dispersion adhesives (8.4); - determination of shear adhesion strength of reaction resin adhesives (8.5); - determination of transverse deformation of cementitious adhesives (8.6). NOTE Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones, etc.), if they do not adversely affect the stones. WARNING - This European Standard can involve hazardous materials and operations. Persons using this standard should be familiar with normal laboratory practice. This European Standard does not purport to address all the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any European and national regulatory conditions.
Adhesives for ceramic tiles - Part 2: Test methods
- ICS
- 83.180;91.100.10;91.100.30
- CCS
- Q31
- 发布
- 2017-02
- 实施
Ceramic tiles. Determination of chemical resistance
- ICS
- 91.100.23
- CCS
- Q31
- 发布
- 2016-12-31
- 实施
- 2016-12-31
Ceramic tiles - Definition, classification, characteristics, assessment and verification of constancy of performance and marking; German version EN 14411:2016
- ICS
- 91.100.23
- CCS
- Q31
- 发布
- 2016-12
- 实施
本标准规定了水泥生产企业能效对标术语和定义、要求、工作步骤、指标体系框架及计算方法。 本标准适用于通用硅酸盐水泥生产企业。
Guidelines for Energy Efficiency Benchmarking of Cement Enterprises
- ICS
- 91.100.25
- CCS
- Q31
- 发布
- 2016-11-20
- 实施
- 2016-12-20
本标准规定了粗钢生产主要工序单位产品能源消耗（以下称能耗）限额的术语和定义、能耗限额、统计范围和计算方法及主要节能管理措施。 本标准适用于钢铁企业进行烧结工序、球团工序、高炉工序和转炉工序单位产品能耗的统计计算、评价以及新建项目的能耗控制。
Energy Consumption Quota and Calculation Method per Unit Product in Main Processes of Crude Steel Production
- ICS
- 91.100.25
- CCS
- Q31
- 发布
- 2016-11-20
- 实施
- 2016-12-20
本标准规定了黄酒单位产品能源消耗（以下称能耗）限额的术语和定义、能耗限额、统计范围、统计方法、计算方法及主要节能管理措施。 本标准适用于黄酒生产企业能源消耗的计算、考核、以及对新建项目的能耗控制。
Comprehensive energy consumption limit and calculation method of unit product of rice wine
- ICS
- 91.100.25
- CCS
- Q31
- 发布
- 2016-11-20
- 实施
- 2016-12-20
