Q32 特种陶瓷 标准查询与下载
共找到 1110 条与 特种陶瓷 相关的标准，共 74 页
本文件规定了二硼化钛粉体的分级、分类与标记、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本文件适用于经高温煅烧、理化处理、高温精制而成的二硼化钛粉体。
Titanium diboride powder
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2022-09-30
- 实施
- 2023-04-01
本文件规定了氧化钙坩埚的要求、试验方法、检验规则以及标签、包装、运输和贮存。 本文件适用于冶金、冶炼行业的氧化钙坩埚。其它行业也可参考使用。
Calcium oxide crucible
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2022-09-30
- 实施
- 2023-04-01
本文件规定了抗氧化超高温涂层用ZrB2(二硼化锆)-SiC(碳化硅)复合粉体的要求、试验方法、检验规则以及标志、包装、运输和贮存。 本文件适用于抗氧化超高温涂层用ZrB2-SiC复合粉体。
ZrB2-SiC composite powder for anti-oxidation ultra-high temperature coating
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2022-09-30
- 实施
- 2023-04-01
本文件规定了气流输送用多孔陶瓷板的要求、试验方法、检验规则以及标志、包装、运输和贮存。 本文件适用于气流输送用多孔陶瓷板。
Porous Ceramic Plates for Air Conveying
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2022-09-30
- 实施
- 2023-04-01
本文件规定了六方氮化硼的分类与标记、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本文件适用于经高温煅烧、理化处理、高温精制而成的六方氮化硼粉体，不适用于食品、化妆品等与人身安全相关行业的六方氮化硼。
Hexagonal boron nitride
- ICS
- 81.060.10
- CCS
- Q32
- 发布
- 2022-09-30
- 实施
- 2023-04-01
本文件规定了高温隔热用高纯泡沫氧化铝陶瓷砖的产品分类、形状和尺寸、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本文件适用于使用温度不高于1850 ℃的高温隔热用高纯泡沫氧化铝陶瓷砖。该产品主要用作高温窑炉、晶体生长炉等高温装备的内衬。
High-purity foamed alumina ceramic tiles for high temperature insulation
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2022-09-30
- 实施
- 2023-04-01
本文件规定了动力型锂离子电池用陶瓷密封圈的要求、试验方法、检验规则、标志、包装、运输和储存。 本文件适用于动力型锂离子电池用陶瓷密封圈。其它电池用陶瓷密封圈可参照使用。
Ceramic sealing ring for power lithium ion battery
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2022-09-30
- 实施
- 2023-04-01
本文件规定了碳化硅陶瓷制品工业计算机层析成像（CT）检测的原理、试验条件、仪器设备、样品、试验步骤、试验数据处理、试验报告。 本文件适用于碳化硅陶瓷制品内部缺陷的工业CT检测，其他陶瓷材料制品内部缺陷的工业CT检测可参照使用。
Industrial computed tomography (CT) inspection of silicon carbide ceramic products
- ICS
- 81.060.20
- CCS
- Q32
- 发布
- 2022-09-30
- 实施
- 2023-04-01
本文件规定了室温精细陶瓷载荷无关硬度的原理、计算步骤和试验报告； 本文件适用于室温精细陶瓷载荷无关硬度的评价，其它材料也可参考使用。
Calculation method for load-independent hardness of fine ceramics
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2022-09-30
- 实施
- 2023-04-01
Ball-on-disk test method for wear resistance of cermet coatings for tools and dies
- ICS
- CCS
- Q32
- 发布
- 2021-11-25
- 实施
- 2021-12-30
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 4 : removal of formaldehyde
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2021-09-11
- 实施
- 2021-09-11
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 5 : removal of methyl mercaptan
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2021-09-11
- 实施
- 2021-09-11
Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Notations and symbols
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2021-07-21
- 实施
- 2021-10-01
Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2021-07-21
- 实施
- 2021-11-13
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of tensile properties of tubes
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2021-07-21
- 实施
- 2021-11-13
This document specifies a test method for the determination of the air-purification performance of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides, such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under irradiation with long-wave ultraviolet (UV) light. This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, that are the basic forms of materials for various applications. This document also applies to structured filter materials including honeycomb-form, woven and non-woven fabrics, and to plastic or paper materials if they contain ceramic microcrystals and composites. This document does not apply to powder or granular photocatalytic materials. This test method is usually applicable to photocatalytic materials produced for air purification. This method is not suitable for the determination of other performance attributes of photocatalytic materials, i.e. decomposition of water contaminants, self-cleaning, antifogging and antibacterial actions. It concerns the removal of formaldehyde.
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 4: Removal of formaldehyde
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2021-07-00
- 实施
This document specifies a test method for the determination of the air-purification performance of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides, such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under irradiation with long-wave ultraviolet (UV) light. This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, that are the basic forms of materials for various applications. This document also applies to structured filter materials including honeycomb-form, woven and non-woven fabrics, and to plastic or paper materials if they contain ceramic microcrystals and composites. This document does not apply to powder or granular photocatalytic materials. This test method is usually applicable to photocatalytic materials produced for air purification. This method is not suitable for the determination of other performance attributes of photocatalytic materials, i.e. decomposition of water contaminants, self-cleaning, antifogging and antibacterial actions. It concerns the removal of methyl mercaptan.
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 5: Removal of methyl mercaptan
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2021-07-00
- 实施
This document specifies an ultrasonic method to determine the components of the elasticity tensor of ceramic matrix composite materials at room temperature. Young's moduli shear moduli and Poisson coefficients, can be determined from the components of the elasticity tensor.It app
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of elastic properties by ultrasonic technique (ISO 18610:2016); German version
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2021-04-00
- 实施
This document specifies a test method for determining the Vickers and Knoop hardness of monolithic fine ceramics at room temperature.
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature (ISO 14705:2016); German version EN ISO 14705:2021
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2021-04-00
- 实施
Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2021-03-03
- 实施
- 2021-09-18
