Q36 玻璃纤维 标准查询与下载
共找到 424 条与 玻璃纤维 相关的标准，共 29 页
本标准规定了结构加固用玻璃纤维布的术语和定义、规格和标记、要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于混凝土结构、木结构、砌体结构和桥梁结构等加固修复用的玻璃纤维布。
Glass fiber sheet for strengthening and restoring structures
- ICS
- CCS
- Q36
- 发布
- 2010-07-29
- 实施
- 2011-01-01
이 표준은 직조용 유리실1)(이하 유리실이라 한다.)에 대하여 규정한다.
Textile glass-yarns
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010-07-27
- 实施
- 2010-07-27
1.1 This specification covers finished fabrics woven from “E” electrical glass fiber yarns that are intended as a reinforcing material in laminated plastics for structural use. This specification can also be applied to fabrics made of other glass types as agreed upon between the purchaser and the supplier. 1.2 This specification specifies the terminology, definitions, general requirements, and physical requirements for finished woven glass fabrics This specification permits the application of sizing materials to the glass fiber yarn during manufacture that helps facilitate weaving. These organic materials are typically removed from the greige fabric and replaced with a finish that is compatible with the resin matrix specified in the contracting document Note 18212;Sizing materials on glass fiber yarns, in most cases, are removed by various cleaning procedures as a first stage in preparing a finished fabric. When these yarn sizing materials are removed during a cleaning procedure they need not be compatible with the subsequent resin matrix. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This specification is one of a series to provide a substitute for Military Specifications: MIL-Y-1140 Yarn, Cord, Sleeving, Cloth, and Tape-Glass; and MIL-C-9084 Cloth, Glass Finished for Resin Laminates. 1.5 Additional ASTM specifications in this series have been drafted and appear in current editions of the Annual Book of ASTM Standards. These include greige glass fabrics, glass tapes, glass sleevings, glass cords, glass sewing threads, and finished laminates made from finished glass fabrics. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Finished Woven Glass Fabrics
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This practice defines the test conditions for testing fiber glass mats.
Test conditions for fiberglass mat test methods
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This test method covers the determination of the moisture sensitivity of fiber glass mat binder systems.
Moisture sensitivity of fiber glass mats
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This method covers the determination of the percent loss on ignition of fiber glass mats. This ignition loss can be considered to be the binder content.
Loss on ignition of fiber glass mats
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
The purpose of this standard practice is to list existing TAPPI test methods which provide procedures for sampling and lot acceptance, stiffness, tear resistance, and thickness, and to suggest modifications to these methods for use in the sampling and testing of fiber glass mats.
Testing of fiber glass mats: use of modified TAPPI procedures for sampling and lot acceptance, stiffness, tear resistance, air permeability, and thickness
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This method covers the determination of the average fiber diameter (or distribution of diameters) of fibers used in nonwoven fiber glass mats.
Average fiber diameter of fiber glass mats
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This practice covers the location from which samples are taken from a sheet of fiber glass mat used as a sample test unit for physical property determination.
Sample location for fiber glass mat sheets
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This method is a description of fiber glass mat attributes that define visual uniformity in the finished mat product.
Fiber glass mat uniformity (visual defects)
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This method covers the determination of the moisture content of fiber glass mat.
Moisture content of fiber glass mats
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This method covers the determination of the tensile strength and elongation at break of fiber glass mats.
Tensile strength and elongation at break for fiber glass mats
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This Japanese Industrial Standard specifies the textile glass chopped strands (hereafter referred to as "chops") to be used mainly for the reinforcement of plastics.
Textile glass chopped strands
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2009-12-21
- 实施
Textile glass -- Woven roving
- ICS
- 59.080.30;59.100.10;81.040.30;83.120
- CCS
- Q36
- 发布
- 2009-11-20
- 实施
Textile glass - Determination of stiffness of rovings
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2009-11
- 实施
Specifies the requirements for 4 types of plain-woven glass rovings of E-type glass filament for use as reinforcement in thermosetting resin systems.
Plain-woven glass rovings for glass-reinforced plastics laminates
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2008-11-28
- 实施
이 표준은 유리 섬유의 로빙 강성도를 측정하는 방법에 대하여 규정한다.
Textile glass-Determination of stiffness of rovings
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2008-10-30
- 实施
- 2008-10-30
이 표준은 유리 섬유 매트의 인장 파단 하중의 측정방법에 대하여 규정한다.이 방법은
Textile glass-Mats-Determination of tensile breaking force
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2008-10-30
- 实施
- 2008-10-30
本标准规定了聚四氟乙烯乳液涂覆玻璃纤维布（以下简称四氟布）的代号、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以玻璃纤维布为基材经涂覆聚四氟乙烯乳液而成的制品。主要用于建筑膜结构材料（TFS）、非金属补偿器（FEJ）、防粘输送带（CB）、防粘耐热衬垫（FHS）、包覆布（CF）等。
Coated glassfiber woven.Part 2: PTFE emulation coated glass woven
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2008-06-16
- 实施
- 2008-12-01
本标准规定了增强橡胶用玻璃纤维绳（以下简称玻璃纤维绳）的术语和定义、产品代号、要求、试验方法、检验规则、包装、标志、运输和贮存等。 本标准适用以连续玻璃纤维纱经过化学处理、烘焙、加捻合股成缆而制成的玻璃纤维线绳。主要用作橡胶制品例如同步带、V带、轮胎等的增强材料。
Glass fibre reinforcing cord for rubber
- ICS
- 91.100.10
- CCS
- Q36
- 发布
- 2008-06-16
- 实施
- 2008-12-01
