Q42 粘土质、高铝质耐火材料 标准查询与下载

YB/T 4637-2018 莫来石质流钢砖

Mullite flow steel brick

YB/T 4639-2018 热风炉用红柱石砖

Andalusite bricks for hot blast stoves

ASTM C212-17 结构性粘土面砖的标准规格

1.1 This specification covers structural clay loadbearing facing tile. Structural facing tile are tile designed for use in interior and exterior unplastered walls and partitions of buildings. 1.2 The property requirements of this specification apply at the time of purchase. The use of results from testing of tile extracted from masonry structures for determining conformance or nonconformance to the property requirements (Section 6) of this standard is beyond the scope of this specification. 1.3 Tile covered by this specification are manufactured from clay, shale, or similar naturally occurring substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment must develop sufficient fired bond between the particulate constituents to provide the strength and durability requirements of this specification. (See firing and fired bond in Terminology C1232.) 1.4 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Structural Clay Facing Tile

YB/T 4577-2016 抗渗透高铝砖

Anti-penetration high alumina bricks

YB/T 4549-2016 堇青石-莫来石窑具

本标准规定了堇青石-莫来石窑具的牌号、形状尺寸、技术要求、试验方法、质量评定程序、包装、标志、运输、储存和质量证明书。 本标准适用于各种工业窑炉用堇青石-莫来石窑具产品(以下简称窑具)。

Cordierite-mullite kiln furniture

GOST R 57028-2016 土工合成材料和土工合成相关产品. 特定压力下厚度的测定方法. 第2部分. 多层产品每层厚度的测定

Geosynthetics and geosynthetic-related products. Method for determination of thickness at specified pressures. Part 2. Determination of thickness of single layers of multilayer products

GOST 33396-2015 土工合成材料. 在水中耐水解作用的测定方法

Geosynthetic materials. Method for determination of resistance to hydrolysis in water

GOST 33395-2015 土工合成材料. 抗氧化的测定方法

Geosynthetic materials. Method for determining the resistance to oxidation

YB/T 4444-2014 炭素焙烧炉用耐火砖

本标准规定了炭素焙烧炉用耐火砖的分类、技术要求、试验方法、质量评定程序、包装、标志、运输、储存及质量证明书。本标准适用于炭素焙烧炉用耐火砖。

Refractory bricks for carbon roaster

YB/T 4439-2014 加热炉用高铝质锚固砖

本标准规定了加热炉用高铝质锚固砖的术语和定义、牌号、形状尺寸、技术要求、试验方法、质量评定程序、包装、标志、运输、储存及质量证明书。本标准适用于加热炉、梭式窑及循环流化床锅炉等工业窑炉用高铝质锚固砖。

High alumina anchor bricks for heating furnace

YB/T 4445-2014 石灰窑用高纯莫来石砖

本标准规定了石灰窑用高纯莫来石砖的形状尺寸、技术要求、试验方法、质量评定程序、包装、标志、运输、储存和质量证明书。本标准适用于石灰窑煅烧带前后过渡段及套筒窑拱桥部位用高纯莫来石砖。

High-purity mullite bricks for lime kiln

YB/T 4381-2014 刚玉—莫来石砖

本标准规定了刚玉-莫来石砖的分类、技术要求、试验方法、质量评定程序、包装、标志、运输、储存及质量证明书。本标准主要适用于高炉陶瓷杯、熔融气化炉、炭黑炉等工业窑炉用刚玉-莫来石砖。

Corundum-mullite bricks

JC/T 2231-2014 水泥窑用镁铁铝尖晶石耐火砖

本标准规定了水泥窑用镁铁铝尖晶石耐火砖的分类和标记、技术要求、试验方法、检验规则以及标志、包装、运输、存和质量证明书。本标准适用于以镁砂和预合成铁铝尖晶石(化学式为FeO·AlO)为主要原料经压制、烧成用于水泥窑烧成带和过渡带的耐火制品。

Periclase-hercynite refractory bricks for cement kiln

GOST R ISO 13433-2014 土工合成材料. 动态穿孔试验 (落锥试验)

Geosynthetics. Dynamic perforation test (cone drop test)

BS EN 1344:2013 粘土铺设.试验方法和要求

Clay pavers. Requirements and test methods

YB/T 4348-2013 刚玉砖

本标准规定了刚玉砖的定义、分类、技术要求、试验方法、质量评定程序、包装、标志、运输、储存及质量证明书。本标准适用于石油化工气化炉、反应炉及其他高温工业窑炉用刚玉砖。

Corundum bricks

JC/T 350-2013 磷酸盐结合高铝质砖

本标准规定了磷酸盐结合高铝质砖的术语和定义、代号和分类、技术要求、试验方法、检验规则以及标志、包装、运输、贮存和质量证明书等。本标准适用于水泥及其他工业窑炉用的磷酸盐结合高铝质砖。

Phosphate bonded high alumina refractory bricks

JC/T 638-2013 玻璃窑用低气孔率粘土砖

本标准规定了玻璃窑用低气孔率粘土砖的术语和定义、分类及形状尺寸、技术要求、试验方法、检验规则以及标志、包装、运输、贮存和质量证明书等。本标准适用于玻璃窑用低气孔率粘土砖。

Low porosity fireclay bricks for glass furnace

JC/T 2197-2013 水泥窑用硅莫红砖

本标准规定了水泥窑用硅莫红砖的术语和定义、分类和标记、技术要求、试验方法、检验规则以及标志、包装、运输、贮存和质量证明书等。本标准适用于水泥窑口、上下过渡带用硅莫红砖。

GMH bricks for cement kilns

ASTM C401-12 氧化铝和硅酸铝质可铸性耐火材料的标准分类

Alumina and alumina-silicate castable refractories are produced to yield property characteristics commensurate with different end use properties. Volume stability, modulus of rupture, bulk density, and lime content have become useful measures to distinguish various alumina and alumina-silicate castable formulations for initial fitness for service. This classification is considered useful for purchase specifications and for quality control. 1.1 This classification covers alumina and alumina-silicate castable refractories that, when tempered with water, will develop structural strength by chemical action. 1.2 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Classification of Alumina and Alumina-Silicate Castable Refractories