Q52 炭素材料 标准查询与下载

BS 6043-2.3:1997 铝制造中使用的碳质材料的取样和测试方法 电极焦 火焰原子吸收光谱法测定生焦和煅烧焦中的微量元素

This International Standard describes a method for the determination of trace elements in green and calcined coke with an ash content of not greater than 1 % (m/m) and with individual concentrations not greater than the following: Calcium 0,025 % (m/m) Chromium 0,005 % (m/m) Copper 0,025 % (m/m) Iron 0,030 % (m/m) Lead 0,010 %(m/m) Magnesium 0,010 %(m/m) Manganese 0,001 % (m/m) Nickel 0,050 % (m/m) Silicon 0,100 % (m/m) Vanadium 0,100% (m/m) Zinc 0,004 % (m/m) NOTE—A method for the determination of ash of cokes is given in ISO 8005:1984, Carbonaceous materials used in the production of aluminium —Green and calcined coke —Determination of ash. However, it is essential that the ash produced by that method not be used in the procedure of this International Standard because of the risk of contamination by trace elements.

Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of trace elements in green and calcined coke by flame atomic absorption spectroscopy

DIN 51926:1997 碳素材料试验.通过定量图像分析测定粘结剂中介晶相含量.粘结剂和浸渍剂

The document specifies a method for the determination of the content of mesophase in solid binding materials at room temperatur.

Testing of carbon materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials

YB/T 2805-1997 矿热炉用炭块

Carbon block for ore furnace

DIN 51925:1996 碳素材料试验.含碳捣实材料试样的备制和体积密度的测定.固体粘接剂和浸渍剂

The method describes the preparation of samples of carbonaceous tamping materials. For the determination of their workability the bulk density is determined.

Testing of carbon materials - Preparation of samples of carbonaceous tamping materials and determination of their bulk density - Solid binders and impregnants

BS 6043-2.11:1995 铝制造中使用的碳质材料的取样和测试方法 焦炭电极 挥发物含量的测定

This International Standard specifies a method for the determination, by gravimetric analysis, of the volatile matter in green coke used in the production of alu-minium. The method is applicable to green cokes having vol-atile matter contents greater than 1 % (m/m).

Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of volatile matter content

DIN 51938:1994 碳素材料试验.通过筛分测定颗粒大小分配.固态物质

The method is used for the determination of the particle size distribution by sifting of carbon materials (cokes, anthracites, graphite materials) in the range of 0,063 to about 30 mm.#,,#

Testing of carbon materials; determination of particle size distribution by sieving; solid matters

YB/T 5228-1993 铝电解用阳极糊

Anode paste for aluminium electrolysis

YB/T 5230-1993 铝电解用炭阳极

Anode carbon for aluminium electrolysis

YB/T 5229-1993 铝电解用普通阴极炭块

Anode carbon for aluminium electrolysis

YB/T 5189-2000 炭糊类挥发分的测定方法

Method for the determination of the volatile component of carbonaceous pastes

YS/T 65-1993 铝电解用阴极糊

Cathode Paste for Aluminum Electrolysis

YS/T 63-1993 铝电解用炭糊检测试样焙烧方法

Roasting method for test sample of carbon paste for aluminum electrolysis

YS/T 64-1993 铝电解用炭素制品电阻率测定方法

Method for determination of resistivity of carbon products for aluminum electrolysis

YS/T 62-1993 铝电解用炭素制品取样方法

Sampling method of carbon products for aluminum electrolysis

SAE AMS3899B-1993 聚砜树脂浸渍的碳纤维带和薄板

This specification and its supplementary detail specifications cover carbon fibers in the form of tape and sheet impregnated with heat-activated, formable, thermoplastic polysulfone resin. These products have been used typically for fabricating high-strength and high-modulus composite parts, using either hand-layup or a machine for automated-tape-layup, but usage is not limited to such applications.

Carbon Fiber Tape and Sheet Polysulfone Resin Impregnated

SAE AMS3899/2B-1993 C PS 140(956)拉力、27(186)模数、120(248)的聚砜树脂浸渍的碳纤维带和薄板

This specification covers one type of thermoplastic, polysulfone-resin-impregnated graphite fibers in the form of tape or sheet. These products have been used typically in structural composites requiring high modulus of elasticity in tension up to 120 degrees C (248 degrees F), but usage is not limited to such applications.

Carbon Fiber Tape and Sheet Polysulfone Resin Impregnated C PS 140 (965) Tensile, 27 (186) Modulus, 120 (248)

SAE AMS3899/1B-1993 C PS 172(1170)拉力、16(110)模数、120(248)的聚砜树脂浸渍的碳纤维带和薄板

This specification covers one type of thermoplastic, polysulfone resin-impregnated carbon fibers in the form of tape or sheet. These products have been used typically in structural composites requiring high strength up to 120 degrees C (248 degrees F), but usage is not limited to such applications.

Carbon Fiber Tape and Sheet Polysulfone Resin Impregnated C PS 172 (1170) Tensile, 16 (110) Modulus, 120 (248)

SAE AMS3892/10A-1992 550(3792)抗拉强度、38(262)抗拉模数的结构复合材料用碳纤维束

This specification covers one type of carbon fiber in the form of tow. Carbon tow with 550 ksi (3792 MPa) tensile strength and 38 Msi (262 GPa) tensile modulus for use in general purpose structural composites requiring high tensile strength and high modulus of elasticity in tension.

Tow, Carbon Fiber for Structural Composites 550 (3792) Tensile Strength, 38 (262) Tensile Modulus

SAE AMS3892/12-1992 730(5033)抗拉强度、41(283)抗拉模数的结构复合材料用碳纤维束

This specification covers one type of carbon fiber in the form of tow. Carbon tow with 730 ksi (5033 MPa) tensile strength and 41 Msi (283 GPa) tensile modulus for use in general purpose structural composites requiring high tensile strength and high modulus of elasticity in tension.

Tow, Carbon Fiber for Structural Composites 730 (5033) Tensile Strength, 41 (283) Tensile Modulus

SAE AMS3892B-1992 结构复合材料用碳纤维束和纱

This specification and its supplementary detail specifications cover carbon fibers in the form of continuous multifilament tow and yarn. This product has been used typically as reinforcement in composites for structural applications, but usage is not limited to such applications.

Fibers, Carbon, Tow and Yarn for Structural Composites