Q52 炭素材料 标准查询与下载

BS 6043-3.3:2000 制铝工业用含碳材料的取样和试验方法.电极.用尺寸法测定阴极碳块和预焙阳极的体密度(表观密度)

This part of ISO 12985 specifies a dimensions method for the determination of the apparent density of carbonaceous products used in the production of aluminium. This method is applicable to samples with a simple or well-defined geometry (cylindrical, rectangular parallelepipedical, cubic, etc.) and having a smooth surface profile. The accuracy of measurement is strongly influenced by the equipment used for sampling, i.e. the drilling and sawing machines.

Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method

BS 6043-3.5.1:2000 制铝工业用含碳材料的取样和试验方法.电极.抗弯强度的测定.三点法

This part of ISO 12986 describes a method for the determination of the bending/shear strength (flexural strength) of prebaked anodes and cathode blocks at temperatures in the range 20 ℃ to 30 ℃. The method is particularly appli-cable to prebaked anodes, but can be applied to cathode blocks. NOTE For the practical application of this International Standard the terms 'bending/shear strength' and 'flexural strength' may be considered equivalent.

Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method

BS 6043-2.4:2000 铝制造中使用的碳质材料的取样和测试方法 焦炭电极 X射线荧光光谱分析

This International Standard specifies an X-ray fluorescence method for the determination of elemental impurities in green and calcined petroleum cokes used for the manufacture of anodes. These anodes are used in the production of aluminium.

Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Analysis by X-ray fluorescence spectroscopy

YB/T 175-2000 金刚砂中碳化硅的测定

The determination of silicon carbide in carborundum

YB/T 5054-2001 炭糊类检测试样制备方法

Method for preparation test sample of carbon pastes

BS 6043-1.13:2000 铝制造中使用的碳质材料的取样和测试方法 电极间距 硫含量的测定

Applicable to pitches containing between 0.1 and 4.0% (m/m) sulfur.

Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulfur content

BS 6043-1.11:2000 铝制造用碳质材料的取样和测试方法

This International Standard describes a method for the determination of the atomic carbon/hydrogen ratio of quinoline-insoluble material isolated from coal-tar pitches. A procedure for the isolation of the quinoline-insoluble material in a form suitable for the analysis is described. NOTE The isolation procedure is not an alternative to ISO 6971, which is to be used in all cases where the amount of quinoline-insoluble matter present in a pitch is to be determined. note:1) ISO 6971, Carbonaceous materials for the production of aluminium —Pitch for electrodes —Determination of contents of quinoline-insoluble material.

Methods of sampling and test for carbonaceous materials used in aluminium manufacture

BS 6043-1.10:2000 铝制造中使用的碳质材料的取样和测试方法 电极间距 挥发物含量的测定 1.10 挥发物含量的测定

This International Standard describes an empirical method for the determination of the volatile matter content of pitch by gas chromatographic analysis of its solution in toluene. Strict adherence to the procedure is essential because of the empirical nature of the method.

Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of volatile matter content. Section 1.10 Determination of volatile matter content

BS 6043-4.1:2000 铝制造中使用的碳质材料的取样和测试方法 冷捣打膏 取样方法

This International Standard describes methods and conditions for sampling of cold-ramming pastes used in aluminium manufacture.

Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Methods of sampling

BS 6043-4.4:2000 制铝工业用碳素材料的取样和试验方法.冷压糊料.未烘烧糊料的挥发物含量的测定

This Technical Specification describes a method for the determination of the volatile-matter content of unbaked cold-ramming pastes used in aluminium manufacture.

Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the volatile matter content of unbaked paste - Section 4.4 Determination of the volatile matter content of unbaked paste

BS 6043-4.2:2000 制铝用碳素材料的取样和试验方法.冷压糊料.通过喹啉萃取测定有效粘合剂含量和集料含量.集料尺寸分布的测定.第4.2节:通过喹啉萃取测定有效粘合剂含量和集料含量.集料尺寸分布的测定

This Technical Specification describes a method for determining the content and particle-size distribution of the solid aggregate component, and also for determining the effective binder content, of cold-ramming pastes used in aluminium manufacture. The method is applicable to cold-ramming pastes made with coal-tar or bituminous binders but not applicable to resin-based binders.

Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution -

BS 6043-3.1.1:1999 铝制造中使用的碳质材料的取样和测试方法 电极 采样 阴极取样

This part of ISO 8007 specifies procedures for sampling consignments of cathode blocks used in the production of aluminium and for taking test samples from individual blocks.

Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of cathodes

BS 6043-3.1.2:1999 铝制造中使用的碳质材料的取样和测试方法 电极 采样 阳极取样

This part of ISO 8007 specifies procedures for the creation and execution of a sampling plan for prebaked anodes from a large consignment or from a batch. NOTE The term "batch" can be substituted by the term "lot" if desired. This part of ISO 8007 also specifies the preferred locations for taking test samples from individual anodes. Cathode blocks and prebaked anodes are considered separately. Procedures for sampling cathode blocks are given in ISO 8007-1. For advice on safety, the reader is referred to ISO 3165:1976, Sampling of chemical products for industrial use —Safety in sampling.

Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of anodes

JIS K 1474 AMD 1:1999 活性炭的试验方法(修改件1)

Test methods for activated carbon (Amendment 1)

ISO 6998:1997/cor 1:1999 铝生产用碳素材料 电极用沥青 焦化值的测定 技术勘误1

This is Technical Corrigendum 1 to ISO 6998-1997 (Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of coking value)

Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value; Technical Corrigendum 1

DIN 51912:1998 碳素材料的试验.氢含量的测定.固体物质

The document specifies a method for the determination of content hydrogen in carbonaceous materials (solid matters).

Testing of carbon materials - Determination of hydrogen content - Solid matters

BS 6043-1.6:1998 铝制造中使用的碳质材料的取样和测试方法 电极间距 焦化值的测定 1.6 焦化值的测定

This International Standard specifies a method for determination of the coking value of pitch used for the production of aluminium.

Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of coking value. Section 1.6 Determination of coking value

ISO 6998:1997 铝生产用碳素材料 电极用沥青 焦化值的测定

This international Standard specifies a method for determination of the coking value of pitch used for the production of aluminium.

Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value

BS 6043-2.3:1997 铝制造中使用的碳质材料的取样和测试方法 电极焦 火焰原子吸收光谱法测定生焦和煅烧焦中的微量元素

This International Standard describes a method for the determination of trace elements in green and calcined coke with an ash content of not greater than 1 % (m/m) and with individual concentrations not greater than the following: Calcium 0,025 % (m/m) Chromium 0,005 % (m/m) Copper 0,025 % (m/m) Iron 0,030 % (m/m) Lead 0,010 %(m/m) Magnesium 0,010 %(m/m) Manganese 0,001 % (m/m) Nickel 0,050 % (m/m) Silicon 0,100 % (m/m) Vanadium 0,100% (m/m) Zinc 0,004 % (m/m) NOTE—A method for the determination of ash of cokes is given in ISO 8005:1984, Carbonaceous materials used in the production of aluminium —Green and calcined coke —Determination of ash. However, it is essential that the ash produced by that method not be used in the procedure of this International Standard because of the risk of contamination by trace elements.

Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of trace elements in green and calcined coke by flame atomic absorption spectroscopy

DIN 51926:1997 碳素材料试验.通过定量图像分析测定粘结剂中介晶相含量.粘结剂和浸渍剂

The document specifies a method for the determination of the content of mesophase in solid binding materials at room temperatur.

Testing of carbon materials - Determination of the content of mesophase in binding materials by quantitative image analysis - Binding and impregnating materials