Q61 石棉材料 标准查询与下载

KS F 3702-2012 蛭石

이 표준은 경량ㆍ흡음ㆍ단열ㆍ방화ㆍ내화 및 치장을 목적으로 사용하는 질석에 대하여 규정한다.

Vermiculites

JC/T 2083-2011 建筑用水基无机干粉室内装饰材料

本标准规定了建筑用水基无机干粉室内装饰材料的术语和定义、分类和标记、要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于以无机胶粘材料、可再分散性胶粉为主要粘结材料，配以无机填料、功能助剂及其他矿物颗粒为骨料制成的以水为分散介质的内墙无机干粉建筑涂覆材料。

Water-based inorganic dry powder interior decorative building material

KS F 3888-2-2011 学校体育设施.运动场附带设施的施工

이 표준은 학교 생활 체육을 위한 운동장의 부대시설에 관한 시공 가이드로서 탄성 포장재,

School athletic facilities - Additional facilities construction for schoolyard

JC/T 2007-2010 摩擦材料用有机纤维

本标准规定了摩擦材料用有机纤维的分类、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于摩擦材料用有机纤维。

Organic fiber for friction materials

JC/T 2008-2010 摩擦材料用人造矿物纤维

本标准规定了摩擦材料用人造矿物纤维的术语和定义、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于摩擦材料用无碱及中碱玻璃纤维原丝、单股或经合股而成的玻璃纤维无捻粗纱和岩棉纤维。

Artificial mineral fiber for friction materials

JC/T 2004-2010 摩擦材料用金属纤维

本标准规定了摩擦材料用粉碎型金属纤维的分类、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于摩擦材料用粉碎型铜纤维和低碳钢纤维。

Metallic fiber for friction materials

JC/T 2005-2010 摩擦材料用天然矿物纤维

本标准规定了摩擦材料用天然矿物纤维的分类、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于摩擦材料用天然矿物纤维。

Natural mineral fiber for friction materials

JC/T 2006-2010 摩擦材料用复合纤维

本标准规定了摩擦材料用复合纤维的分类与标记、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于摩擦材料用复合纤维。

Composite fiber for friction materials

JC/T 2009-2010 摩擦材料用非金属添加物

本标准规定了摩擦材料用非金属添加物的分类、要求、试验方法、检验规则、标志、包装、运输与贮存等。 本标准适用于摩擦材料所用的非金属添加物。

Non-metallic mineral filling for friction material

JC/T 2010-2010 摩擦材料用金属及金属矿物填料

本标准规定了摩擦材料用金属及金属矿物填料的分类、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于摩擦材料用金属及金属矿物填料。

Metal and metallic mineral fillings for friction materials

JC/T 2011-2010 摩擦材料用粘结剂

本标准规定了摩擦材料用粘结剂的分类、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于摩擦材料用粘结剂。

Adhesives for friction materials

JC/T 555-2010 耐酸石棉橡胶板

本标准规定了耐酸石棉橡胶板的要求、试验方法、检验规则以及标志、包装、贮存、运输等。 本标准适用于温度为200℃、压力为2.5MPa以下，以酸类为介质的设备及管道密封衬垫用的耐酸石棉橡胶板

Acid-resisting compressed asbestos fibre jointing

ASTM E2356-10 综合建筑物石棉调查的标准操作规程

Management of asbestos-containing materials in buildings and facilities requires knowledge of the location, type, quantity, and condition of the material. The more complete and accurate the information available, the more appropriate and cost-effective are the control measures used to reduce possible exposure to airborne asbestos fibers. This is true whether the asbestos-containing materials remain undisturbed and completely intact, are selectively removed for maintenance or prior to renovation, or are removed to the greatest extent feasible before demolishing the building or facility. This practice describes three types of surveys that support different objectives. These are the Baseline Survey, the Project Design Survey, and the Pre-Construction Survey. The Baseline Survey is a building-wide or facility-wide inspection that provides a general sense of the overall location, type, quantity, and condition of asbestos-containing materials present. It is thorough in that most accessible functional spaces are inspected and bulk samples taken of suspect materials observed. The baseline survey provides information for long-term management of asbestos-containing materials and prioritization of response actions. The presence of asbestos in suspect materials may be assumed or presumed in some cases without bulk samples being taken or analyzed. However, the baseline survey is unobtrusive in that samples are not taken where doing so would result in objectionable damage to surfaces or where institutional barriers preclude access. In a baseline survey, destructive testing is avoided. Posting of signs and labels required for compliance with OSHA regulations would use the information generated during a Baseline Survey. Note 18212;A Baseline Survey is sometimes called an “AHERA” survey because it provides the type of information used for management of asbestos-containing materials in schools. However, the baseline survey described in this practice requires inspection, bulk sampling, quantification, and assessment of suspect materials that are excluded by virtue of their type and location from the AHERA regulations for schools. Note 28212;Suspect material subject to disturbance by planned or emergency maintenance may not always be identified as to asbestos content in a Baseline Survey. Collecting a single bulk sample, or a small number of samples, to determine if the material contains asbestos does not constitute a survey within the meaning of this practice. Nonetheless, the sample(s) should be collected in accordance with the methods described in Appendix X1 (this must be done by a properly-credentialed individual) and analyzed as set forth in 6.5. The Project Design Survey is more focused than a Baseline Survey and is used to provide information to the Project Designer for preparing abatement plans and specifications. The locations inspected are limited to the areas that will be affected by the abatement project. If the project is being done prior to renovation or demolition, the construction plans or at least a clear statement of the scope of the renovation or demolition work are required for a proper Project Design Survey. Destructive testing is often required for a Project Design Survey. The presence of asbestos in suspect materials is always confirmed in a Project Design Survey rather than being assumed or presumed. Other information required for the Project Design is collected during the survey. The Pre-Construction Survey is performed in anticipation of renovation or demolition where a Baseline Survey has not been conducted and there is no information, or insufficient information, as to the existence of asbestos-containing materials w..........

Standard Practice for Comprehensive Building Asbestos Surveys

JC/T 2000-2009 油井水泥物理性能检测仪器

本标准规定了油井水泥物理性能检测仪器的定义、技术要求、检验方法、检验规则、标志、包装等内容。 本标准适用于生产和使用中的油井水泥物理性能检验用的搅拌器、常压稠化仪、常压养护箱、高压养护釜、增压稠化仪的检测。

Apparatus for determining physical performance of oil well cement

JC/T 554-2009 石棉胶乳抄取板

本标准规定了石棉胶乳抄取板的术语、分类、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于各种内燃机气缸垫、进排气管垫及设备联接部或管法兰垫的抄取板。

Asbestos rubber latex beater jointing

JC/T 415-2009 石棉片

本标准规定了石棉片的术语、分类、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于用作平板玻璃引上机压辊和平拉机辊道材料的石棉片。

Asbestos slice

JC/T 2002-2009 建筑材料吸放湿性能测试方法

本标准规定了具有湿度调节功能的建筑材料的吸放湿性能测试方法。 本标准适用于涂料、腻子、壁纸以及板材等室内装饰装修材料的吸放湿性能测试。其他具有湿度调节功能材料的吸放湿性能测试也可适用本方法。

Testing for water vapour adsorption/desorption performance of building materials

JC/T 812-2009 泡沫石棉

本标准规定了泡沫石棉的术语和定义、产品标记、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于使用温度在500℃内的保温隔热用泡沫石棉。

Foamed asbestos piece

JC/T 41-2009 电绝缘石棉纸

本标准规定了电绝缘石棉纸的术语、分类、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于电绝缘石棉纸。

Asbestos paper for electric insulation

JC/T 210-2009 石棉布、带

本标准规定了石棉布、带的分类与分级、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于机织石棉布、带。

Asbestos cloth & tape