Q77 建筑电器与防火器材设备 标准查询与下载

DIN 18015-2:2010 住宅建筑用电气设备.第2部分:最低设备的范围和性质

Electrical installations in residential buildings - Part 2: Nature and extent of minimum equipment

GOST R 50571.29-2009 建筑物的电气设施.第5-55部分:电气设备的选择和安装.其他设备

Electrical installations of buildings. Part 5-55. Selection and erection of electrical equipment. Other equipment

IEC 60364-5-55:2008 建筑物的电气设施.第5-55部分:电气设备的选择和安装.其他设备

This part of IEC 60364 covers requirements for the selection and erection of low-voltage generating sets and for the selection and erection of luminaires and lighting installations intended to be part of the fixed installation.

Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment

JIS C 0364-7-717:2008 建筑物的电气装置.第7-717部分:特殊装置或场所的要求.可动或可移装置

この節の特別要求事項は，移動形又は運搬可能形ユニットについて規定する。

Electrical installations of buildings -- Part 7-717: Requirements for special installations or locations -- Mobile or transportable units

DIN 18015-3 Berichtigung 1:2008 民用建筑物的电气装置.第3部分:电气设备的布线和配置.技术勘误DIN 18015-3-2007

Electrical installations in residential buildings - Part 3: Wiring and disposition of electrical equipment, Corrigenda to DIN 18015-3:2007-09

KS F 2821-2007 塑料建筑材料的耐候性试验方法

이 규격은 플라스틱 건축 재료의 내후성 정도를 추정하기 위하여 옥외 노출한 시험편의 성능을

Standard method of test for change in properties of plastics building materials resulting from out-door exposure

DIN 18015-1:2007 民用建筑物的电气装置.第1部分:规划原则

Electrical installations in residential buildings - Part 1: Planning principles

DIN 18015-3:2007 民用建筑物的电气装置.第3部分:电气设备的布线和配置

Electrical installations in residential buildings - Part 3: Wiring and disposition of electrical equipment

NF P52-700-2:2007 建筑物自动控制和建筑物管理中的开放数据通讯.家庭和建筑物用电子设备.第2部分:KNXnet/IP通信

Open data communication in building automation, controls and building management - Home and building electronic system - Part 2 : KNXnet/IP Communication.

BS EN 50470-2:2006 电学计量设备(a.c.).特殊要求.有功电能(等级指数A、B）电极量表

This European Standard applies to newly manufactured electromechanical watt-hour meters intended for residential, commercial and light industrial use, of class indexes A and B, for the measurement of alternating current electrical active energy in 50 Hz networks. It specifies particular requirements and type test methods. It applies to electromechanical watt-hour meters for indoor and outdoor application, consisting of a measuring element and register(s) enclosed together in a meter case. It also applies to operation indicator(s) and test output(s). If the meter has (a) measuring element(s) for more than one type of energy (multi-energy meters), or when other functional elements, like maximum demand indicators, electronic tariff registers, time switches, ripple control receivers, data communication interfaces etc. are enclosed in the meter case (multi-function meters) then this standard applies only for the active energy metering part. This standard distinguishes between: – meters of class indexes A and B; – direct connected and transformer operated meters; – meters for use in networks equipped with or without earth fault neutralizers. It does not apply to: – watt-hour meters where the voltage across the connection terminals exceeds 600 V (line-to-line voltage for meters for polyphase systems); – portable meters. Methods for acceptance testing are covered by the IEC 62058 series of standards 1). The dependability aspect is covered by the documents of the IEC 62059 series.

Electricity metering equipment (a.c.) - Particular requirements - Electromechanical meters for active energy (class indexes A and B)

BS EN 50470-3:2006 电学计量设备(a.c.).特殊要求.有功电能(等级指数A、B和C）静态计

This European Standard applies to newly manufactured static watt-hour meters intended for residential, commercial and light industrial use, of class indexes A, B and C, for the measurement of alternating current electrical active energy in 50 Hz networks. It specifies particular requirements and type test methods. It applies to static watt-hour meters for indoor and outdoor application, consisting of a measuring element and register(s) enclosed together in a meter case. It also applies to operation indicator(s) and test output(s). If the meter has (a) measuring element(s) for more than one type of energy (multi-energy meters), or when other functional elements, like maximum demand indicators, electronic tariff registers, time switches, ripple control receivers, data communication interfaces etc. are enclosed in the meter case (multi-function meters) then this standard applies only for the active energy metering part. This standard distinguishes between: – meters of class indexes A, B and C; – direct connected and transformer operated meters; – meters for use in networks equipped with or without earth fault neutralizers. It does not apply to: – watt-hour meters where the voltage across the connection terminals exceeds 600 V (line-toline voltage for meters for polyphase systems); – portable meters; – reference meters. Methods for acceptance testing are covered by the IEC 62058 series of standards 1). The dependability aspect is covered by the documents of the IEC 62059 series.

Electricity metering equipment (a.c.) - Particular requirements - Static meters for active energy (class indexes A, B and C)

KS F 2823-2006 绝热排管的隔热性能测定方法(热水循环法)

이 규격은 주택 등의 난방(냉방) 또는 급탕 배관에 사용하는 공장에서 피복재를 입힌 소구

Method of testing to determine the thermal properties of insulated heating tubes (hot water circulation procedure)

DIN EN 50090-9-1:2004 民居用电子系统.第9-1部分:安装要求.HBES 1级绞线用通用电缆

Home and Building Electronic Systems (HBES) - Part 9-1: Installation requirements - Generic cabling for HBES Class 1 Twisted Pair; German version EN 50090-9-1:2004

DIN EN 50090-4-1:2004 家用和建筑物用电子系统.第4-1部分:媒介独立层.HBES 1级应用层

This part of the EN 50090 specifies the services and protocol of the application layer for usage in Home and Building Electronic Systems. It provides the services and the interface to the user process as defined in EN 50090 32. This procedure is based on the services and the protocol is provided by the Transport Layer, Network Layer and Data Link Layer as specified in EN 50090 42.#,,#

Home and Building Electronic Systems (HBES) - Part 4-1: Media independent layers - Application layer for HBES Class 1; German version EN 50090-4-1:2004, text English

JIS A 4201:2003 建筑物的雷电防护

この規格は，建築物又は煙突，塔，油槽などの工作物その他のもの(以下,建築物等という。)に適用する雷保護システムの設計及び施工について規定する。次の場合は，この規格の適用範囲外である。a)鉄道システム b)建築物等の外部に設ける送電，配電及び発電システム(建築物等に付帯するものを除く。) c)建築物等の外部に設ける通信システム(建築物等に付帯するものを除く。) d)車両，船舶，航空機及び沖合設備

Protection of structures against lightning

KS F 2815-2001 排烟设备检查标准

이 규격은 건축물에 설치된 배연 설비의 성능을 검사하기 위한 검사 항목, 검사 기구, 검사

Inspection standard of smoke exhaust equipment

KS F 2824-2001 遮光设备的遮光系数简易测定方法

이 규격은 창 유리를 통해 입사하는 일사를 차폐할 목적으로 창의 실내 쪽에 사용하는 차양의

Simplified test method for determining shading coefficient of shading devices

DIN EN 50090-8:2001 家用和建筑物用电子系统(HBES).第8部分:产品合格评定

Home and Building Electronic Systems (HBES) - Part 8: Conformity assessment of products; German version EN 50090-8:2000

DB12/ 038-2000 防雷设施安全性能要求和检测方法

Safety performance requirements and testing methods of lightning protection facilities

DB42/ 170.1-1999 建筑与建筑群智能化系统工程验收规范 第一部分：综合布线系统工程验收规范

本标准规定了综合布线系统工程的验收条件、验收内容和要求、验收方法及验收结论判收结论判定。本标准适用于四对非屏蔽/屏蔽对绞电缆水平布线、大对数非屏蔽/屏蔽对绞电缆大楼垂直布线，以及光缆水平布线、大楼垂直布鞋线和建筑群主干布线系统工程质量及传输性能验收。本标准同样适用于同轴电缆传输系统工程质量及传输性能验收。

Code for Acceptance of Intelligent System Engineering of Buildings and Groups of Buildings Part 1: Code for Acceptance of Integrated Wiring System Engineering