Q86 市容卫生器材设备 标准查询与下载

BS EN 840-3:2004 移动式废品箱.耳轴式和/或梳形提升装置用容积为1300 l及以下的带圆顶盖的4轮废品箱.尺寸规格和设计

This European Standard specifies dimensions and design requirements of mobile waste containers with 4 wheels, with dome lid(s) and capacity up to 1300 I to be used by trunnion and/or comb lifting device.

Mobile waste containers. Containers with 4 wheels with capacity up to 1300 l with dome lid(s), for trunnion and/or comb lifting devices. Dimensions and design

BS EN 840-6:2004 移动式废品箱.安全和健康要求

This European Standard provides the essential safety, health and ergonomic requirements for mobile waste containers according to EN 840-1 to EN 840-4, not including hazardous wastes containers.

Mobile waste containers - Safety and health requirements

BS EN 840-2:2004 移动式废品箱.耳轴式和/或梳形提升装置用容积为1300 l及以下的带平盖的4轮废品箱.尺寸规格和设计

This European Standard specifies dimensions and design requirements of mobile waste containers with 4 wheels, with flat lid(s) and capacity up to 1300 I to be used by trunnion and/or comb lifting device.

Mobile waste containers. Containers with 4 wheels with capacity up to 1300 l with flat lid(s), for trunnion and/or comb lifting devices. Dimensions and design

BS EN 840-1:2004 移动式废品箱.梳形提升装置用容积为400 l及以下的两轮废品箱.尺寸规格和设计

This European Standard specifies dimensions and design requirements of mobile waste containers with 2 wheels, with capacity up to 400 I to be used by comb lifting devices.

Mobile waste containers. Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design

BS EN 840-5:2004 移动式废品箱.性能要求和试验方法

This European Standard gives the test methods for mobile waste containers according to EN 840-1 to EN 840-4. It also gives the levels to be reached during the tests or after they have been done. This European Standard is applicable to mobile waste containers with capacities up to 1 700 I.

Mobile waste containers. Performance requirements and test methods

BS EN 840-4:2004 移动式废品箱.宽耳轴式或BG和/或宽梳形提升装置用容积为1700 l及以下的带平盖的4轮废品箱.尺寸规格和设计

This European Standard specifies dimensions and design requirements of mobile waste containers with 4 wheels, with flat lid(s) and capacity up to 1 700 I to be used by wide trunnion or BG-lifting device and/or wide comb lifting device.

Mobile waste containers. Containers with 4 wheels with capacity up to 1700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices. Dimensions and design

ASTM D7045-04(2010) RCRC垃圾清除器械、探测监测计划用的地下水监测要素的最优化指南

The principal use of this standard is in the identification of effective groundwater monitoring constituents for a detection-monitoring program. The significance of the guide is to minimize the false positive rate for the facility by only monitoring those constituents that are intrinsic to the waste mass and eliminate those constituents that are present in background in concentrations that confound evaluation from downgradient wells. Federal, state and local regulations require large generic lists of constituents to be monitored in an effort to detect a release from a WMU. However, identification and selection of parameters based on site-specific physical and chemical conditions are in many cases also acceptable to regulatory agencies and result in a more effective and environmentally protective groundwater monitoring system. Naturally occurring soil and groundwater constituents within and near a WMU area should be determined prior to the development of a monitoring program. This is important in the selection of site-specific constituents lists and avoiding difficulties with a regulatory authority regarding sources of monitored constituents. Site-specific lists of constituents relative to the WMU will provide for the regulator those constituents which will effectively measure the performance of a WMU rather than the use of a generic list that could include naturally occurring constituents as well as those not present in the WMU. Site-specific constituent lists often result in fewer monitored constituents (that is, monitoring programs are optimized). This process is critical to the overall success of the monitoring program for the following reasons: The reduction of the monitoring constituents to only those found or expected to be found or derived from site-specific source material will reduce the number of false-positive results since only those parameters that could indicate a release are monitored. The use of constituents that contrast significantly to background groundwater eliminates those that could lead to erroneous results merely due to temporal and spatial variability of components found in the natural geochemistry of the upper-most water-bearing zone. Where statistics are required, fewer statistical comparisons through well and constituent optimization enhances the statistical power (or effectiveness) of the monitoring program (Gibbons, 1994; USEPA, July 1992). Eliminating the cost of unnecessary laboratory analyses produces a more efficient and cost-effective monitoring program and minimizes the effort required by both the local enforcement agency and the owner/operator to respond (either with correspondence or additional field/laboratory efforts) to erroneous detection decisions. This type of approach is acceptable to regulatory agencies arid applicable under most groundwater monitoring programs under RCRA regulations. For example, in determining the alternate constituent list at Solid Waste Facilities, 40 CFR 258.54(a)(l) allows for deletion of 40 CFR 258 Appendix I constituents if it can be shown that the removed constituents are not reasonably expected to be in or derived from the waste contained in the unit. 40 CFR 258(a)(2) allows approved States to establish an alternate list of inorganic parameters in lieu of all or some of the heavy metals (constituents 1-14 in Appendix I to Part 258), if the alternative constituents provide a reliable indication of inorganic releases from the unit to groundwater. The framework for this standard is generally based on the guidelines established under 40 CFR 258.54(a)(l) to optimize a groundwater-monitoring network in such a manner as to still provide an early warning system of a release from the WMU. This guidance document is, however, applicable for all WMU, not just those associated with solid waste disposal facilities. In determining the alternative constituents, consideration must be made f......

Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities

PAS 60-1-2004 含石棉材料的受控清除设备.第1部分:含石棉材料的受控润湿.规范

This PAS specifies requirements for equipment for the controlled wetting of asbestos-containing materials, via injection or spraying of liquid to suppress the release of airborne asbestos fibres. It is applicable to the wetting of asbestos-containing materials, via multipoint injection or spraying, in insulating board (spraying only), sprayed coatings, thermal insulation and coatings on pipes, tanks and vessels.

Equipment used in the controlled removal of asbestos-containing materials - Part 1: Controlled wetting of asbestos-containing materials - Specification

ANSI/UL 32-2004 金属废物箱的安全性标准

The following items are subject to comment: 1.) The deletion of the scope paragraph 1.2. 2.) The updating of text entities in Sections 2.1 and 2.2. 3.) The updating of references to ASTM Standards. 4.) The revision of Marking Requirements in Section 17. 5.) The 5th Edition of the Standard for Metal Waste Cans, UL 32. These requirements cover metal waste cans intended to be employed in factories, garages, workshops, and other locations where there is need for a receptacle for temporary storage inside buildings of oily waste, rags, and other similar combustible waste materials.

Standard for Safety for Metal Waste Cans

DIN 30737:2003 垃圾葙.带开盖设备和提升装置容积为2.5m3和5m3的活动倾倒垃圾箱

This standard specifies requirements for mobile discharge system containers with hinged lid.

Waste containers - Mobile discharge system containers with hinged lid with capacities 2,5 m<(hoch)3> and 5 m<(hoch)3> for lifting devices with lid opener device

CJ/T 171-2002 城市环境卫生设施属性数据采集表及数据库结构

Attribute data collection form and database structure of urban environment sanitary facilities

UL 1086 BULLETINS-2003 家用垃圾压实器

The following items are subject to comment: 1.) These requirements cover trash compactors that are rated 250 volts or less and intended for household use to reduce the volume of waste prior to disposal; and that are intended to be employed in accordance with the National Electrical Code, NFPA 70. 2.) Addition of marking requiring an HP rating not less than the equivalent HP ratings of combined loads. 3.) Revisions to change "natural gray" to "gray" for identification of grounded conductors.

Household Trash Compactors

CJ/T 127-2000 压缩式垃圾车

Compression refuse collector

CJ/T 118-2000 生活垃圾焚烧炉

Municipal solid waste incinerator

DIN 30706-3:2000 市政技术性服务术语.第3部分:冬季道路设施

The document specifies terms for winter road services.

Terminology of municipal technical services - Part 3: Winter road services

CJ/T 18-1999 城市环境卫生专用设备.垃圾卫生填埋

Specific equipments for municipal environmental sanitation.Sanitary land fill of refuse

CJ/T 84-1999 垃圾车

Garbage truck

CJ/T 19-1999 城市环境卫生专用设备.垃圾堆肥

Specific equipments for municipal environmental sanitation.Compost refuse

CJ/T 20-1999 城市环境卫生专用设备.垃圾焚烧、气化、热解

Specific equipments for municipal environmental sanitation.Incineration,gasification,pyrolysis of refuse

CJ/T 17-1999 城市环境卫生专用设备.垃圾转运

Specific equipments for municipal environmental sanitation.Transferring of refuse