共找到 65 条与 制砖与制瓦设备 相关的标准,共 5 页
이 표준은 재활용 골재를 주소재로 하여 주로 조립에 의해 보도, 차도, 광장, 주차장 등의
Recycled foundry sand interlocking block for side walk and road
이 규격은 연소재(연탄재, 석탄재 등)와 각종의 재활용 폐자재를 주원료로 하고 경화제를 혼
Waste ash brick
이 규격은 폐수 처리장에서 발생하는 슬러지, 폐제올라이트 또는 각종 폐기물 등을 주원료로
Lightweight swelled ceramic block
本标准规定了盘转式压砖机的产品分类与技术参数、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于盘转式压砖机(以下简称“压砖机”)。
Rotary type brickmaking machine
Masonry units and masonry specimens are sometimes removed as part of an assessment of the condition of masonry construction. This document is intended to standardize the preparation of such units and masonry specimens for compressive strength testing. Note 18212;Masonry specimens removed from existing masonry construction (single wythe, multi-wythe or portions thereof) will sometimes contain mortar, grout, reinforcement, or accessory materials. This practice provides information pertaining to the removal of hardened mortar, cleaning, and other special preparation required prior to compressive strength testing of a manufactured masonry unit or masonry specimen that has been removed from usage. This practice does not address test procedures or the use of test results conducted on removed specimens. This practice does not determine whether removed masonry materials met original specification requirements. Note 28212;Compressive strength test results of masonry units and masonry specimens extracted from the field are expected to vary from and will likely be less than compressive strength test results of masonry units that have not been placed in service or masonry prisms that have been constructed within a controlled environment. Comparison of results of tests conducted on specimens removed from service to those of masonry units prior to use or of constructed prisms is difficult. Considerable judgment is typically required for the selection and preparation of specimens removed from service.1.1 The purpose of this practice is to standardize the preparation of manufactured masonry units and masonry specimens extracted from the field for compressive strength testing in a laboratory environment.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Compressive Strength Testing
本标准规定了墙材工业用液压多斗取料机的型式、型号、基本参数、技术要求、试验方法、检验规则、标志、包装运输和贮存。 本标准适用于墙材工业用液压多斗取料机(以下简称多斗取料机)。
Building industrial hydraulic bucket excavator
本标准规定了建材工业用墙板挤压机的术语和定义、产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于建材工业用墙板挤压机,其它类似产品可参照执行。
Wall-board extruder technical condition
本标准规定了墙材工业用轮碾机的型式、型号与基本参数、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于墙材工业用轮碾机(以下简称轮碾机)。
Building industrial roll breaker
本标准规定了墙材工业用自动码坯机的型式、型号、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于墙材工业用自动码坯机(以下简称自动码坯机)。
Building industrial automatic unburned brick stacker
本标准规定了墙材工业用自动切坯机的型式、型号与基本参数、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于墙材工业用自动切坯机(以下简称自动切坯机)。
Building industrial automatic brick cutter
本标准规定了墙材工业用箱式给料的产品分类与基本参数、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于墙材工业用箱式给料机(以下简称箱式给料机)。
Building industrial roll breaker
本标准规定了墙材工业用搅拌机(以下简称搅拌机)的型式、型号、基本参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于砖瓦、砌块行业搅拌已经破碎的粘土、页岩、煤矸石、粉煤灰等原料用的搅拌机。其他行业应用的同类产品,亦可参照使用。
Mixer for wall materials industry
Vacuum extruder. Technical specification
Type and basic parameters of vacuum extruder
Roller type fine crushers. Technical specification
Type and basic parameters of roller type fine crushers
Softy specification for machinery of clay roofing tile manufacture
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号